[U-Boot] [PULL] : Please pull u-boot-imx

[Albert ARIBAUD]

Hi Stefano,

On Fri, 28 Jun 2013 17:05:29 +0200, Stefano Babic <sbabic at denx.de>
wrote:

> Hi Albert,
> 
> some fixes and pending patches. Please pull from u-boot-imx, thanks !
> 
> The following changes since commit 4a1c7b13ae104d4526d3176793b7f6b06694df15:
> 
>   vf610twr: Drop unneeded 'status' variable (2013-06-06 17:52:08 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to d6c6d127c5b948ec381fad5b24a2bc5497720644:
> 
>   vf610twr: Remove SoC name from U-Boot prompt (2013-06-28 16:59:08 +0200)
> 
> ----------------------------------------------------------------
> Dirk Behme (2):
>       spi: mxc_spi: Fix pre and post divider calculation
>       spi: mxc_spi: Update pre and post divider algorithm
> 
> Eric Nelson (1):
>       dwc_ahsata: Allow use with dcache enabled
> 
> Fabio Estevam (8):
>       README: mx28_common: Keep the text within 80 columns
>       README: mx28_common: Do not hardcode the SSP port
>       README: mx28_common: Fix structure of sentence
>       README: mxs: Introduce README.mxs
>       mx28evk: Move README file inside board directory
>       m28evk: Move README file inside board directory
>       MAINTAINERS: Add an entry to the mx6q wandboard variant
>       video: mxsfb: Break the line in videomode message
> 
> Otavio Salvador (2):
>       vf610twr: Add default environment in line with other Freescale boards
>       vf610twr: Remove SoC name from U-Boot prompt
> 
> Pierre Aubert (3):
>       imx6: fix GPR2 wrong definition
>       imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
>       imx: Add support for the SabreSD shipped with i.MX6DL
> 
> Robert Winkler (4):
>       imx: nitrogen6x: Enabled data cache
>       imx: nitrogen6x: Enable bootz
>       imx: nitrogen6x: Enable raw initrd
>       imx: nitrogen6x: Enable filesystem generic commands
> 
> Tapani Utriainen (1):
>       Add support for Wandboard Quad
> 
> trem (2):
>       mx27: add function enable_caches
>       mx27: add i2c clock
> 
>  MAINTAINERS                                        |    4 +-
>  arch/arm/cpu/arm926ejs/mx27/generic.c              |   10 +
>  arch/arm/include/asm/arch-mx27/clock.h             |    1 +
>  arch/arm/include/asm/arch-mx6/imx-regs.h           |    2 +-
>  arch/arm/include/asm/arch-mx6/mx6dl_pins.h         | 1591
> +++++++++++++++++++-
>  doc/README.m28 => board/denx/m28evk/README         |    4 +-
>  .../freescale/mx28evk/README                       |    3 +-
>  .../freescale/{mx6qsabresd => mx6sabresd}/Makefile |    2 +-
>  .../mx6qsabresd.c => mx6sabresd/mx6sabresd.c}      |    7 +-
>  board/wandboard/README                             |    5 +
>  board/wandboard/wandboard.c                        |    2 +-
>  boards.cfg                                         |    6 +-
>  doc/README.mx28_common                             |   75 +-
>  drivers/block/dwc_ahsata.c                         |   34 +-
>  drivers/spi/mxc_spi.c                              |   28 +-
>  drivers/video/mxsfb.c                              |    2 +-
>  include/configs/mx6qsabreauto.h                    |    2 +-
>  .../{mx6qsabre_common.h => mx6sabre_common.h}      |    1 -
>  include/configs/{mx6qsabresd.h => mx6sabresd.h}    |    2 +-
>  include/configs/nitrogen6x.h                       |    6 +-
>  include/configs/vf610twr.h                         |   93 +-
>  include/configs/wandboard.h                        |    2 +
>  22 files changed, 1776 insertions(+), 106 deletions(-)
>  rename doc/README.m28 => board/denx/m28evk/README (75%)
>  rename doc/README.mx28evk => board/freescale/mx28evk/README (93%)
>  rename board/freescale/{mx6qsabresd => mx6sabresd}/Makefile (98%)
>  rename board/freescale/{mx6qsabresd/mx6qsabresd.c =>
> mx6sabresd/mx6sabresd.c} (98%)
>  rename include/configs/{mx6qsabre_common.h => mx6sabre_common.h} (99%)
>  rename include/configs/{mx6qsabresd.h => mx6sabresd.h} (97%)
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.