[U-Boot] [PULL] : Please pull u-boot-imx

[Stefano Babic]

Hi Albert,

please pull from u-boot-imx, thanks.

The following changes since commit cac423a730d3506154744485af1bbc1cd3a1e6a8:

  Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2013-05-11
22:24:28 +0200)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 4a1c7b13ae104d4526d3176793b7f6b06694df15:

  vf610twr: Drop unneeded 'status' variable (2013-06-06 17:52:08 +0200)

----------------------------------------------------------------
Alison Wang (7):
      arm: vf610: Add IOMUX support for Vybrid VF610
      arm: vf610: Add Vybrid VF610 CPU support
      net: fec_mxc: Add support for Vybrid VF610
      arm: vf610: Add watchdog support for Vybrid VF610
      arm: vf610: Add uart support for Vybrid VF610
      arm: vf610: Add Vybrid VF610 to mxc_ocotp document
      arm: vf610: Add basic support for Vybrid VF610TWR board

Andrew Gabbasov (1):
      mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS
signal

Benoît Thébaudeau (1):
      imx: spl: Merge libimx-common make rules

Fabio Estevam (7):
      mx28evk: Add splash screen support
      mx23evk: Add splash screen support
      video: mxsfb: Add an entry for mx23evk/mx28vk video modes
      mx6slevk: Allow booting a device tree kernel
      wandboard: Enable HDMI splashscreen
      ARM: imx: Fix incorrect usage of CONFIG_SYS_MMC_ENV_PART
      vf610twr: Drop unneeded 'status' variable

Luka Perkov (1):
      wandboard: fix typo in README

Marek Vasut (1):
      arm: mxs: Fix vectoring table crafting

Otavio Salvador (2):
      build: Use generic boot logo matching
      wandboard: Add Boot Splash image with Wandboard logo

Renato Frias (2):
      mx6qsabreauto: Add i2c to mx6qsabreauto board
      mx6qsabreauto: Add Port Expander reset

SARTRE Leo (1):
      Add support for Congatec Conga-QEVAl board

 MAINTAINERS                                   |    8 +
 Makefile                                      |    2 +-
 arch/arm/cpu/arm926ejs/mxs/mxs.c              |   25 +-
 arch/arm/cpu/armv7/vf610/Makefile             |   42 +++
 arch/arm/cpu/armv7/vf610/generic.c            |  324 +++++++++++++++++++
 arch/arm/cpu/armv7/vf610/timer.c              |  103 ++++++
 arch/arm/imx-common/Makefile                  |    2 +-
 arch/arm/imx-common/iomux-v3.c                |    6 +
 arch/arm/include/asm/arch-vf610/clock.h       |   39 +++
 arch/arm/include/asm/arch-vf610/crm_regs.h    |  225 +++++++++++++
 arch/arm/include/asm/arch-vf610/imx-regs.h    |  419
+++++++++++++++++++++++++
 arch/arm/include/asm/arch-vf610/iomux-vf610.h |  101 ++++++
 arch/arm/include/asm/imx-common/iomux-v3.h    |   18 ++
 board/boundary/nitrogen6x/nitrogen6x.c        |    1 -
 board/congatec/cgtqmx6eval/Makefile           |   42 +++
 board/congatec/cgtqmx6eval/README             |   29 ++
 board/congatec/cgtqmx6eval/cgtqmx6eval.c      |  167 ++++++++++
 board/freescale/mx23evk/mx23evk.c             |    6 +
 board/freescale/mx23evk/spl_boot.c            |   32 ++
 board/freescale/mx28evk/iomux.c               |   33 ++
 board/freescale/mx28evk/mx28evk.c             |    6 +
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |   57 ++++
 board/freescale/mx6qsabrelite/mx6qsabrelite.c |    1 -
 board/freescale/vf610twr/Makefile             |   39 +++
 board/freescale/vf610twr/imximage.cfg         |   33 ++
 board/freescale/vf610twr/vf610twr.c           |  407
++++++++++++++++++++++++
 board/wandboard/README                        |    4 +-
 board/wandboard/wandboard.c                   |   98 ++++++
 boards.cfg                                    |    2 +
 doc/README.mxc_ocotp                          |    1 +
 doc/README.vf610                              |   10 +
 drivers/net/fec_mxc.c                         |    4 +-
 drivers/serial/Makefile                       |    1 +
 drivers/serial/serial_lpuart.c                |  132 ++++++++
 drivers/video/mxsfb.c                         |    5 +
 drivers/watchdog/Makefile                     |    2 +-
 include/configs/cgtqmx6eval.h                 |  194 ++++++++++++
 include/configs/mx23evk.h                     |   17 +
 include/configs/mx28evk.h                     |   17 +
 include/configs/mx53ard.h                     |    3 +-
 include/configs/mx6qsabre_common.h            |    2 +-
 include/configs/mx6qsabreauto.h               |    7 +-
 include/configs/mx6qsabresd.h                 |    1 -
 include/configs/mx6slevk.h                    |    2 +-
 include/configs/vf610twr.h                    |  140 +++++++++
 include/configs/wandboard.h                   |   20 +-
 spl/Makefile                                  |    6 +-
 tools/Makefile                                |   27 +-
 tools/logos/wandboard.bmp                     |  Bin 0 -> 22390 bytes
 49 files changed, 2818 insertions(+), 44 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/vf610/Makefile
 create mode 100644 arch/arm/cpu/armv7/vf610/generic.c
 create mode 100644 arch/arm/cpu/armv7/vf610/timer.c
 create mode 100644 arch/arm/include/asm/arch-vf610/clock.h
 create mode 100644 arch/arm/include/asm/arch-vf610/crm_regs.h
 create mode 100644 arch/arm/include/asm/arch-vf610/imx-regs.h
 create mode 100644 arch/arm/include/asm/arch-vf610/iomux-vf610.h
 create mode 100644 board/congatec/cgtqmx6eval/Makefile
 create mode 100644 board/congatec/cgtqmx6eval/README
 create mode 100644 board/congatec/cgtqmx6eval/cgtqmx6eval.c
 create mode 100644 board/freescale/vf610twr/Makefile
 create mode 100644 board/freescale/vf610twr/imximage.cfg
 create mode 100644 board/freescale/vf610twr/vf610twr.c
 create mode 100644 doc/README.vf610
 create mode 100644 drivers/serial/serial_lpuart.c
 create mode 100644 include/configs/cgtqmx6eval.h
 create mode 100644 include/configs/vf610twr.h
 create mode 100644 tools/logos/wandboard.bmp


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================