[U-Boot] [PULL] : Please pull u-boot-imx

[Albert ARIBAUD]

Hi Stefano,

On Thu, 06 Jun 2013 17:55:33 +0200, Stefano Babic <sbabic at denx.de>
wrote:

> Hi Albert,
> 
> please pull from u-boot-imx, thanks.
> 
> The following changes since commit cac423a730d3506154744485af1bbc1cd3a1e6a8:
> 
>   Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2013-05-11
> 22:24:28 +0200)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 4a1c7b13ae104d4526d3176793b7f6b06694df15:
> 
>   vf610twr: Drop unneeded 'status' variable (2013-06-06 17:52:08 +0200)
> 
> ----------------------------------------------------------------
> Alison Wang (7):
>       arm: vf610: Add IOMUX support for Vybrid VF610
>       arm: vf610: Add Vybrid VF610 CPU support
>       net: fec_mxc: Add support for Vybrid VF610
>       arm: vf610: Add watchdog support for Vybrid VF610
>       arm: vf610: Add uart support for Vybrid VF610
>       arm: vf610: Add Vybrid VF610 to mxc_ocotp document
>       arm: vf610: Add basic support for Vybrid VF610TWR board
> 
> Andrew Gabbasov (1):
>       mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS
> signal
> 
> Benoît Thébaudeau (1):
>       imx: spl: Merge libimx-common make rules
> 
> Fabio Estevam (7):
>       mx28evk: Add splash screen support
>       mx23evk: Add splash screen support
>       video: mxsfb: Add an entry for mx23evk/mx28vk video modes
>       mx6slevk: Allow booting a device tree kernel
>       wandboard: Enable HDMI splashscreen
>       ARM: imx: Fix incorrect usage of CONFIG_SYS_MMC_ENV_PART
>       vf610twr: Drop unneeded 'status' variable
> 
> Luka Perkov (1):
>       wandboard: fix typo in README
> 
> Marek Vasut (1):
>       arm: mxs: Fix vectoring table crafting
> 
> Otavio Salvador (2):
>       build: Use generic boot logo matching
>       wandboard: Add Boot Splash image with Wandboard logo
> 
> Renato Frias (2):
>       mx6qsabreauto: Add i2c to mx6qsabreauto board
>       mx6qsabreauto: Add Port Expander reset
> 
> SARTRE Leo (1):
>       Add support for Congatec Conga-QEVAl board
> 
>  MAINTAINERS                                   |    8 +
>  Makefile                                      |    2 +-
>  arch/arm/cpu/arm926ejs/mxs/mxs.c              |   25 +-
>  arch/arm/cpu/armv7/vf610/Makefile             |   42 +++
>  arch/arm/cpu/armv7/vf610/generic.c            |  324 +++++++++++++++++++
>  arch/arm/cpu/armv7/vf610/timer.c              |  103 ++++++
>  arch/arm/imx-common/Makefile                  |    2 +-
>  arch/arm/imx-common/iomux-v3.c                |    6 +
>  arch/arm/include/asm/arch-vf610/clock.h       |   39 +++
>  arch/arm/include/asm/arch-vf610/crm_regs.h    |  225 +++++++++++++
>  arch/arm/include/asm/arch-vf610/imx-regs.h    |  419
> +++++++++++++++++++++++++
>  arch/arm/include/asm/arch-vf610/iomux-vf610.h |  101 ++++++
>  arch/arm/include/asm/imx-common/iomux-v3.h    |   18 ++
>  board/boundary/nitrogen6x/nitrogen6x.c        |    1 -
>  board/congatec/cgtqmx6eval/Makefile           |   42 +++
>  board/congatec/cgtqmx6eval/README             |   29 ++
>  board/congatec/cgtqmx6eval/cgtqmx6eval.c      |  167 ++++++++++
>  board/freescale/mx23evk/mx23evk.c             |    6 +
>  board/freescale/mx23evk/spl_boot.c            |   32 ++
>  board/freescale/mx28evk/iomux.c               |   33 ++
>  board/freescale/mx28evk/mx28evk.c             |    6 +
>  board/freescale/mx6qsabreauto/mx6qsabreauto.c |   57 ++++
>  board/freescale/mx6qsabrelite/mx6qsabrelite.c |    1 -
>  board/freescale/vf610twr/Makefile             |   39 +++
>  board/freescale/vf610twr/imximage.cfg         |   33 ++
>  board/freescale/vf610twr/vf610twr.c           |  407
> ++++++++++++++++++++++++
>  board/wandboard/README                        |    4 +-
>  board/wandboard/wandboard.c                   |   98 ++++++
>  boards.cfg                                    |    2 +
>  doc/README.mxc_ocotp                          |    1 +
>  doc/README.vf610                              |   10 +
>  drivers/net/fec_mxc.c                         |    4 +-
>  drivers/serial/Makefile                       |    1 +
>  drivers/serial/serial_lpuart.c                |  132 ++++++++
>  drivers/video/mxsfb.c                         |    5 +
>  drivers/watchdog/Makefile                     |    2 +-
>  include/configs/cgtqmx6eval.h                 |  194 ++++++++++++
>  include/configs/mx23evk.h                     |   17 +
>  include/configs/mx28evk.h                     |   17 +
>  include/configs/mx53ard.h                     |    3 +-
>  include/configs/mx6qsabre_common.h            |    2 +-
>  include/configs/mx6qsabreauto.h               |    7 +-
>  include/configs/mx6qsabresd.h                 |    1 -
>  include/configs/mx6slevk.h                    |    2 +-
>  include/configs/vf610twr.h                    |  140 +++++++++
>  include/configs/wandboard.h                   |   20 +-
>  spl/Makefile                                  |    6 +-
>  tools/Makefile                                |   27 +-
>  tools/logos/wandboard.bmp                     |  Bin 0 -> 22390 bytes
>  49 files changed, 2818 insertions(+), 44 deletions(-)
>  create mode 100644 arch/arm/cpu/armv7/vf610/Makefile
>  create mode 100644 arch/arm/cpu/armv7/vf610/generic.c
>  create mode 100644 arch/arm/cpu/armv7/vf610/timer.c
>  create mode 100644 arch/arm/include/asm/arch-vf610/clock.h
>  create mode 100644 arch/arm/include/asm/arch-vf610/crm_regs.h
>  create mode 100644 arch/arm/include/asm/arch-vf610/imx-regs.h
>  create mode 100644 arch/arm/include/asm/arch-vf610/iomux-vf610.h
>  create mode 100644 board/congatec/cgtqmx6eval/Makefile
>  create mode 100644 board/congatec/cgtqmx6eval/README
>  create mode 100644 board/congatec/cgtqmx6eval/cgtqmx6eval.c
>  create mode 100644 board/freescale/vf610twr/Makefile
>  create mode 100644 board/freescale/vf610twr/imximage.cfg
>  create mode 100644 board/freescale/vf610twr/vf610twr.c
>  create mode 100644 doc/README.vf610
>  create mode 100644 drivers/serial/serial_lpuart.c
>  create mode 100644 include/configs/cgtqmx6eval.h
>  create mode 100644 include/configs/vf610twr.h
>  create mode 100644 tools/logos/wandboard.bmp
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.