[U-Boot] [PATCH v4 06/14] sf: Add bank addr code in CONFIG_SPI_FLASH_BAR

Jagannadha Sutradharudu Teki jagannadha.sutradharudu-teki at xilinx.com
Thu Jun 13 22:55:28 CEST 2013


Defined bank addr code on CONFIG_SPI_FLASH_BAR macro, to reduce the
size for existing boards which has < 16Mbytes SPI flashes.

It's upto user which has provision to use the bank addr code for
flashes which has > 16Mbytes.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---
Changes for v4:
	- rebase of 02/14
Changes for v3:
	- none
Changes for v2:
	- none

 README                               |  5 +++++
 drivers/mtd/spi/spi_flash.c          | 23 +++++++++++++++++------
 drivers/mtd/spi/spi_flash_internal.h | 12 ++++++++----
 include/spi_flash.h                  |  3 ++-
 4 files changed, 32 insertions(+), 11 deletions(-)

diff --git a/README b/README
index 3d81092..a2b956e 100644
--- a/README
+++ b/README
@@ -2489,6 +2489,11 @@ CBFS (Coreboot Filesystem) support
 		Define this option to include a destructive SPI flash
 		test ('sf test').
 
+		CONFIG_SPI_FLASH_BAR		Ban/Extended Addr Reg
+
+		Define this option to use the Bank addr/Extended addr
+		support on SPI flashes which has size > 16Mbytes.
+
 - SystemACE Support:
 		CONFIG_SYSTEMACE
 
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 7e987a0..c9ef61f 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -74,7 +74,7 @@ int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
 	unsigned long page_addr, byte_addr, page_size;
 	size_t chunk_len, actual;
 	int ret;
-	u8 cmd[4], bank_sel;
+	u8 cmd[4];
 
 	page_size = flash->page_size;
 
@@ -86,6 +86,9 @@ int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
 
 	cmd[0] = CMD_PAGE_PROGRAM;
 	for (actual = 0; actual < len; actual += chunk_len) {
+#ifdef CONFIG_SPI_FLASH_BAR
+		u8 bank_sel;
+
 		bank_sel = offset / SPI_FLASH_16MB_BOUN;
 
 		ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
@@ -93,7 +96,7 @@ int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
 			debug("SF: fail to set bank%d\n", bank_sel);
 			return ret;
 		}
-
+#endif
 		page_addr = offset / page_size;
 		byte_addr = offset % page_size;
 		chunk_len = min(len - actual, page_size - byte_addr);
@@ -148,7 +151,7 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
 int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
 		size_t len, void *data)
 {
-	u8 cmd[5], bank_sel;
+	u8 cmd[5], bank_sel = 0;
 	u32 remain_len, read_len;
 	int ret = -1;
 
@@ -162,6 +165,7 @@ int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
 	cmd[4] = 0x00;
 
 	while (len) {
+#ifdef CONFIG_SPI_FLASH_BAR
 		bank_sel = offset / SPI_FLASH_16MB_BOUN;
 
 		ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
@@ -169,7 +173,7 @@ int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
 			debug("SF: fail to set bank%d\n", bank_sel);
 			return ret;
 		}
-
+#endif
 		remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1) - offset);
 		if (len < remain_len)
 			read_len = len;
@@ -240,7 +244,7 @@ int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len)
 {
 	u32 erase_size;
 	int ret;
-	u8 cmd[4], bank_sel;
+	u8 cmd[4];
 
 	erase_size = flash->sector_size;
 	if (offset % erase_size || len % erase_size) {
@@ -260,6 +264,9 @@ int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len)
 		cmd[0] = CMD_ERASE_64K;
 
 	while (len) {
+#ifdef CONFIG_SPI_FLASH_BAR
+		u8 bank_sel;
+
 		bank_sel = offset / SPI_FLASH_16MB_BOUN;
 
 		ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
@@ -267,7 +274,7 @@ int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len)
 			debug("SF: fail to set bank%d\n", bank_sel);
 			return ret;
 		}
-
+#endif
 		spi_flash_addr(offset, cmd);
 
 		debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
@@ -321,6 +328,7 @@ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
 	return 0;
 }
 
+#ifdef CONFIG_SPI_FLASH_BAR
 int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel)
 {
 	u8 cmd;
@@ -389,6 +397,7 @@ int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0)
 
 	return 0;
 }
+#endif
 
 #ifdef CONFIG_OF_CONTROL
 int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
@@ -534,10 +543,12 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
 		goto err_manufacturer_probe;
 	}
 
+#ifdef CONFIG_SPI_FLASH_BAR
 	/* Configure the BAR - disover bank cmds and read current bank  */
 	ret = spi_flash_bank_config(flash, *idp);
 	if (ret < 0)
 		goto err_manufacturer_probe;
+#endif
 
 #ifdef CONFIG_OF_CONTROL
 	if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
index 00ed1ee..e613ef3 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -35,11 +35,13 @@
 #define SPI_FLASH_STMICRO_IDCODE0	0x20
 #define SPI_FLASH_WINBOND_IDCODE0	0xef
 
+#ifdef CONFIG_SPI_FLASH_BAR
 /* Bank addr access commands */
-#define CMD_BANKADDR_BRWR		0x17
-#define CMD_BANKADDR_BRRD		0x16
-#define CMD_EXTNADDR_WREAR		0xC5
-#define CMD_EXTNADDR_RDEAR		0xC8
+# define CMD_BANKADDR_BRWR		0x17
+# define CMD_BANKADDR_BRRD		0x16
+# define CMD_EXTNADDR_WREAR		0xC5
+# define CMD_EXTNADDR_RDEAR		0xC8
+#endif
 
 /* Common status */
 #define STATUS_WIP			0x01
@@ -90,11 +92,13 @@ static inline int spi_flash_cmd_write_disable(struct spi_flash *flash)
 /* Program the status register. */
 int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr);
 
+#ifdef CONFIG_SPI_FLASH_BAR
 /* Program the bank address register */
 int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel);
 
 /* Configure the BAR - discover the bank cmds */
 int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0);
+#endif
 
 /*
  * Same as spi_flash_cmd_read() except it also claims/releases the SPI
diff --git a/include/spi_flash.h b/include/spi_flash.h
index 1f9ec69..1de193a 100644
--- a/include/spi_flash.h
+++ b/include/spi_flash.h
@@ -38,11 +38,12 @@ struct spi_flash {
 	u32		page_size;
 	/* Erase (sector) size */
 	u32		sector_size;
+#ifdef CONFIG_SPI_FLASH_BAR
 	/* Bank cmds - cmd[0] - read, cmd[1] - write */
 	u8		bank_cmd[2];
 	/* Current flash bank */
 	u8		bank_curr;
-
+#endif
 	void *memory_map;	/* Address of read-only SPI flash access */
 	int		(*read)(struct spi_flash *flash, u32 offset,
 				size_t len, void *buf);
-- 
1.8.3




More information about the U-Boot mailing list