[U-Boot] arm, arm335x: add watchdog support

Michael Trimarchi michael at amarulasolutions.com
Wed Jun 5 16:21:32 CEST 2013


Hi

On Jun 5, 2013 4:17 PM, "Heiko Schocher" <hs at denx.de> wrote:
>
> Hello Michael,
>
> Am 05.06.2013 15:31, schrieb Michael Trimarchi:
> > Hi
> >
> > On Jun 4, 2013 10:55 AM, "Heiko Schocher" <hs at denx.de <mailto:hs at denx.de>>
wrote:
> >>
> >> Add TI OMAP 16xx & 24xx/34xx 32KHz (non-secure) watchdog support.
> >>
> >> Signed-off-by: Heiko Schocher <hs at denx.de <mailto:hs at denx.de>>
> >> Cc: Albert Aribaud <albert.u.boot at aribaud.net <mailto:
albert.u.boot at aribaud.net>>
> >> Cc: Tom Rini <trini at ti.com <mailto:trini at ti.com>>
> >> ---
> >>  arch/arm/include/asm/arch-am33xx/cpu.h |  20 ++++++
> >>  drivers/watchdog/Makefile              |   1 +
> >>  drivers/watchdog/omap_wdt.c            | 115
+++++++++++++++++++++++++++++++++
> >>  3 Dateien geändert, 136 Zeilen hinzugefügt(+)
> >>  create mode 100644 drivers/watchdog/omap_wdt.c
> [...]
> >> diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
> >> new file mode 100644
> >> index 0000000..dc4df98
> >> --- /dev/null
> >> +++ b/drivers/watchdog/omap_wdt.c
> >> @@ -0,0 +1,115 @@
> [...]
> >> +       /* wait for posted write to complete */
> >> +       while ((readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WTGR))
> >> +               ;
> >> +}
> >> +
> >
> > I think that this patch has some problem because watchdog reset is in
getc code. Did you try to paste very long string when it is enabled? You
need to
> > avoid reset when it is not needed
>
> I think, I do not understand you ... this is for all watchdogs
> the case ...
>
> I currently pasted a 500 bytes long string, seeing no problems
> with the watchdog...
>

OK, maybe was a problem of my version. I have done the same driver 2 month
ago and tested on omap3. I optimize the watchdog reset using time delaying.
BTW if it works I have no other comments. Sorry for the noise

Michael

> bye,
> Heiko
> --
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


More information about the U-Boot mailing list