[U-Boot] [PATCH v3] ARM: imx: Fix incorrect usage of CONFIG_SYS_MMC_ENV_PART

[Stefano Babic]

On 05/06/2013 03:05, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> When running the "save" command several times on a mx6qsabresd we see:
> 
> U-Boot > save
> Saving Environment to MMC...
> Writing to MMC(1)... done
> U-Boot > save
> Saving Environment to MMC...
> MMC partition switch failed
> U-Boot > save
> Saving Environment to MMC...
> Writing to MMC(1)... done
> U-Boot > save
> Saving Environment to MMC...
> MMC partition switch failed
> U-Boot > save
> Saving Environment to MMC...
> Writing to MMC(1)... done
> U-Boot > save
> Saving Environment to MMC...
> MMC partition switch failed
> 
> This issue is caused by the incorrect usage of CONFIG_SYS_MMC_ENV_PART.
> 
> CONFIG_SYS_MMC_ENV_PART should be used to specify the mmc partition that stores
> the environment variables.
> 
> On some imx boards it is been incorrectly used to pass the partition of kernel
> and dtb files for the 'mmcpart' script variable.
> 
> Remove the CONFIG_SYS_MMC_ENV_PART usage and configure the 'mmcpart' variable
> directly.
> 
> Reported-by: Jason Liu <r64343 at freescale.com>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---


Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================