[U-Boot] [PATCH v4 2/3] ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114

[Jim Lin]

>On 06/20/2013 02:13 AM, Jim Lin wrote:
>> Tegra30 and Tegra114 are compatible except PLL parameters.
>>
>> Tested on Tegra30 Cardhu, and Tegra114 Dalmore
>> platforms. All works well.
>> Changes in v4:
>
>>  - In pinmux-config-cardhu.h, chnage GMI_AD13 pinmux state to be OUTPUT
>>    in order to be driven HIGH for Beaver board.
>
>That should be reverted. As I mentioned in my previous response,
>GMI_AD13 is the wrong pin.
Please help me, test this v4 patch set on Beaver board, and
tell me result.
Thanks.

--
nvpublic