[U-Boot] Please pull u-boot-mpc85xx.git
Tom Rini
trini at ti.com
Mon Jun 24 22:17:41 CEST 2013
On Fri, Jun 21, 2013 at 03:51:37PM -0500, Andy Fleming wrote:
> The following changes since commit 7315cfd9e1922ee1c3c5f016e5a3b16199122172:
>
> NET: Fix system hanging if NET device is not installed (2013-06-19 08:32:44 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-mpc85xx.git master
>
> for you to fetch changes up to 5707233880090f785c33df32c04549ea1aeef61e:
>
> powerpc/85xx: Add P1023RDB board support (2013-06-20 17:08:53 -0500)
>
> ----------------------------------------------------------------
> Andy Fleming (2):
> 85xx: Change clock-frequency compatible to 2.0
> 85xx: Change case of MPC85XX_PORBMSR_ROMLOC_SHIFT
>
> Axel Lin (1):
> powerpc: mpc85xx/mpc86xx: Fix off-by-one boundary checking with ARRAY_SIZE
>
> Chris Packham (1):
> powerpc/CoreNet: Allow pbl images to take u-boot images != 512K
>
> Chunhe Lan (1):
> powerpc/85xx: Add P1023RDB board support
>
> Fabio Estevam (1):
> powerpc: Use lower case for the core names
>
> Liu Gang (6):
> powerpc/doc: Update the README.srio-pcie-boot-corenet
> powerpc/boot: Change the macro of Boot from SRIO and PCIE master module
> powerpc/b4860qds: Enable master module for boot from SRIO and PCIE
> powerpc/b4860qds: Slave module for boot from SRIO and PCIE
> powerpc/t4qds: Enable master module for Boot from SRIO and PCIE
> powerpc/t4qds: Slave module for boot from SRIO and PCIE
>
> Mingkai Hu (2):
> powerpc/mpc85xx: explicit cast the SDRAM size to type phys_size_t
> fsl_ifc: add support for different IFC bank count
>
> Prabhakar Kushwaha (9):
> powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
> powerpc/mpc85xx: new SPL support for IFC NAND
> board/p1010rdb:Add NAND boot support using new SPL format
> board/bsc9131rdb:Add NAND boot support using new SPL format
> board/bsc9132qds:Add NAND boot support using new SPL format
> powerpc/mpc85xx:Fix "boot page TLB" entry size for NAND SPL
> board/b4860qds: Relax NOR flash teadc timing parameter
> board/p1010rdb: Fix PCIe TLB creation on CONFIG_PCI define
> powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
>
> Priyanka Jain (3):
> board/bsc9131rdb: Add targets for Sysclk 100MHz
> board/bsc9131rdb: Add DSP side tlb and laws
> board/bsc9131rdb: Update default boot environment settings
>
> Scott Wood (1):
> powerpc/mpc85xx: work around erratum A-006593
>
> Ying Zhang (4):
> powerpc/mpc85xx: support application without resetvec segment in the linker script
> powerpc/mpc85xx: modify the functionality clear_bss and aligning the end address of the BSS
> common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
> Makefile: move the common makefile line to public area
>
> York Sun (2):
> powerpc/BSC9132: Add IFC bank count
> powerpc/pixis: Fix pixis help message
>
> README | 27 ++
> arch/powerpc/cpu/mpc85xx/Makefile | 1 +
> arch/powerpc/cpu/mpc85xx/cmd_errata.c | 3 +
> arch/powerpc/cpu/mpc85xx/cpu.c | 10 +-
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 5 +-
> arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 10 +-
> arch/powerpc/cpu/mpc85xx/fdt.c | 2 +-
> arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c | 4 +-
> arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c | 4 +-
> arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/mpc8568_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p1010_serdes.c | 4 +-
> arch/powerpc/cpu/mpc85xx/p1021_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p1022_serdes.c | 4 +-
> arch/powerpc/cpu/mpc85xx/p1023_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p2020_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p2041_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p3041_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p4080_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p5020_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/p5040_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/start.S | 2 +-
> arch/powerpc/cpu/mpc85xx/t1040_serdes.c | 2 +-
> arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 18 +-
> arch/powerpc/cpu/mpc85xx/u-boot.lds | 8 +
> arch/powerpc/cpu/mpc86xx/cpu.c | 2 +-
> arch/powerpc/cpu/mpc86xx/mpc8610_serdes.c | 4 +-
> arch/powerpc/cpu/mpc86xx/mpc8641_serdes.c | 4 +-
> arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 60 ++-
> arch/powerpc/cpu/mpc8xxx/srio.c | 4 +-
> arch/powerpc/include/asm/config_mpc85xx.h | 13 +-
> arch/powerpc/include/asm/fsl_ifc.h | 95 +++--
> arch/powerpc/include/asm/fsl_law.h | 5 +
> arch/powerpc/include/asm/immap_85xx.h | 4 +-
> board/freescale/b4860qds/tlb.c | 19 +
> board/freescale/bsc9131rdb/Makefile | 16 +
> board/freescale/bsc9131rdb/README | 18 +-
> board/freescale/bsc9131rdb/law.c | 4 +
> board/freescale/bsc9131rdb/spl_minimal.c | 118 ++++++
> board/freescale/bsc9131rdb/tlb.c | 17 +-
> board/freescale/bsc9132qds/Makefile | 17 +
> board/freescale/bsc9132qds/bsc9132qds.c | 4 +-
> board/freescale/bsc9132qds/law.c | 6 +-
> board/freescale/bsc9132qds/spl_minimal.c | 130 +++++++
> board/freescale/bsc9132qds/tlb.c | 27 +-
> board/freescale/common/Makefile | 10 +
> board/freescale/common/pixis.c | 2 +
> board/freescale/p1010rdb/Makefile | 16 +
> .../freescale/p1010rdb/spl_minimal.c | 20 +-
> board/freescale/p1010rdb/tlb.c | 13 +-
> board/freescale/p1023rdb/Makefile | 33 ++
> board/freescale/p1023rdb/ddr.c | 105 +++++
> board/freescale/p1023rdb/law.c | 34 ++
> board/freescale/p1023rdb/p1023rdb.c | 161 ++++++++
> board/freescale/p1023rdb/tlb.c | 115 ++++++
> board/freescale/t4qds/tlb.c | 19 +
> boards.cfg | 8 +
> common/Makefile | 44 ++-
> doc/README.srio-pcie-boot-corenet | 34 +-
> drivers/mtd/nand/Makefile | 1 +
> .../mtd/nand/fsl_ifc_spl.c | 37 +-
> drivers/pci/fsl_pci_init.c | 6 +-
> include/configs/B4860QDS.h | 35 +-
> include/configs/BSC9131RDB.h | 62 ++-
> include/configs/BSC9132QDS.h | 63 ++-
> include/configs/P1010RDB.h | 77 ++--
> include/configs/P1023RDB.h | 401 ++++++++++++++++++++
> include/configs/P2041RDB.h | 1 +
> include/configs/P3041DS.h | 2 +-
> include/configs/P4080DS.h | 2 +-
> include/configs/P5020DS.h | 2 +-
> include/configs/a3m071.h | 1 +
> include/configs/am335x_evm.h | 1 +
> include/configs/pcm051.h | 1 +
> include/configs/t4qds.h | 35 +-
> lib/Makefile | 14 +-
> nand_spl/board/freescale/p1010rdb/Makefile | 142 -------
> tools/pblimage.c | 32 +-
> 80 files changed, 1831 insertions(+), 393 deletions(-)
> create mode 100644 board/freescale/bsc9131rdb/spl_minimal.c
> create mode 100644 board/freescale/bsc9132qds/spl_minimal.c
> rename nand_spl/board/freescale/p1010rdb/nand_boot.c => board/freescale/p1010rdb/spl_minimal.c (95%)
> create mode 100644 board/freescale/p1023rdb/Makefile
> create mode 100644 board/freescale/p1023rdb/ddr.c
> create mode 100644 board/freescale/p1023rdb/law.c
> create mode 100644 board/freescale/p1023rdb/p1023rdb.c
> create mode 100644 board/freescale/p1023rdb/tlb.c
> rename nand_spl/nand_boot_fsl_ifc.c => drivers/mtd/nand/fsl_ifc_spl.c (88%)
> create mode 100644 include/configs/P1023RDB.h
> delete mode 100644 nand_spl/board/freescale/p1010rdb/Makefile
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130624/2938a639/attachment.pgp>
More information about the U-Boot
mailing list