[U-Boot] Please pull u-boot-mpc85xx.git

Tom Rini trini at ti.com
Tue Jun 25 16:56:09 CEST 2013


On Fri, Jun 21, 2013 at 03:51:37PM -0500, Andy Fleming wrote:

> The following changes since commit 7315cfd9e1922ee1c3c5f016e5a3b16199122172:
> 
>   NET: Fix system hanging if NET device is not installed (2013-06-19 08:32:44 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-mpc85xx.git master
> 
> for you to fetch changes up to 5707233880090f785c33df32c04549ea1aeef61e:
> 
>   powerpc/85xx: Add P1023RDB board support (2013-06-20 17:08:53 -0500)
> 
> ----------------------------------------------------------------
> Andy Fleming (2):
>       85xx: Change clock-frequency compatible to 2.0
>       85xx: Change case of MPC85XX_PORBMSR_ROMLOC_SHIFT
> 
> Axel Lin (1):
>       powerpc: mpc85xx/mpc86xx: Fix off-by-one boundary checking with ARRAY_SIZE
> 
> Chris Packham (1):
>       powerpc/CoreNet: Allow pbl images to take u-boot images != 512K
> 
> Chunhe Lan (1):
>       powerpc/85xx: Add P1023RDB board support
> 
> Fabio Estevam (1):
>       powerpc: Use lower case for the core names
> 
> Liu Gang (6):
>       powerpc/doc: Update the README.srio-pcie-boot-corenet
>       powerpc/boot: Change the macro of Boot from SRIO and PCIE master module
>       powerpc/b4860qds: Enable master module for boot from SRIO and PCIE
>       powerpc/b4860qds: Slave module for boot from SRIO and PCIE
>       powerpc/t4qds: Enable master module for Boot from SRIO and PCIE
>       powerpc/t4qds: Slave module for boot from SRIO and PCIE
> 
> Mingkai Hu (2):
>       powerpc/mpc85xx: explicit cast the SDRAM size to type phys_size_t
>       fsl_ifc: add support for different IFC bank count
> 
> Prabhakar Kushwaha (9):
>       powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
>       powerpc/mpc85xx: new SPL support for IFC NAND
>       board/p1010rdb:Add NAND boot support using new SPL format
>       board/bsc9131rdb:Add NAND boot support using new SPL format
>       board/bsc9132qds:Add NAND boot support using new SPL format
>       powerpc/mpc85xx:Fix "boot page TLB" entry size for NAND SPL
>       board/b4860qds: Relax NOR flash teadc timing parameter
>       board/p1010rdb: Fix PCIe TLB creation on CONFIG_PCI define
>       powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
> 
> Priyanka Jain (3):
>       board/bsc9131rdb: Add targets for Sysclk 100MHz
>       board/bsc9131rdb: Add DSP side tlb and laws
>       board/bsc9131rdb: Update default boot environment settings
> 
> Scott Wood (1):
>       powerpc/mpc85xx: work around erratum A-006593
> 
> Ying Zhang (4):
>       powerpc/mpc85xx: support application without resetvec segment in the linker script
>       powerpc/mpc85xx: modify the functionality clear_bss and aligning the end address of the BSS
>       common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
>       Makefile: move the common makefile line to public area
> 
> York Sun (2):
>       powerpc/BSC9132: Add IFC bank count
>       powerpc/pixis: Fix pixis help message
> 
>  README                                             |   27 ++
>  arch/powerpc/cpu/mpc85xx/Makefile                  |    1 +
>  arch/powerpc/cpu/mpc85xx/cmd_errata.c              |    3 +
>  arch/powerpc/cpu/mpc85xx/cpu.c                     |   10 +-
>  arch/powerpc/cpu/mpc85xx/cpu_init.c                |    5 +-
>  arch/powerpc/cpu/mpc85xx/cpu_init_early.c          |   10 +-
>  arch/powerpc/cpu/mpc85xx/fdt.c                     |    2 +-
>  arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c          |    4 +-
>  arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c          |    4 +-
>  arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c          |    2 +-
>  arch/powerpc/cpu/mpc85xx/mpc8568_serdes.c          |    2 +-
>  arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c          |    2 +-
>  arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c          |    2 +-
>  arch/powerpc/cpu/mpc85xx/p1010_serdes.c            |    4 +-
>  arch/powerpc/cpu/mpc85xx/p1021_serdes.c            |    2 +-
>  arch/powerpc/cpu/mpc85xx/p1022_serdes.c            |    4 +-
>  arch/powerpc/cpu/mpc85xx/p1023_serdes.c            |    2 +-
>  arch/powerpc/cpu/mpc85xx/p2020_serdes.c            |    2 +-
>  arch/powerpc/cpu/mpc85xx/p2041_serdes.c            |    2 +-
>  arch/powerpc/cpu/mpc85xx/p3041_serdes.c            |    2 +-
>  arch/powerpc/cpu/mpc85xx/p4080_serdes.c            |    2 +-
>  arch/powerpc/cpu/mpc85xx/p5020_serdes.c            |    2 +-
>  arch/powerpc/cpu/mpc85xx/p5040_serdes.c            |    2 +-
>  arch/powerpc/cpu/mpc85xx/start.S                   |    2 +-
>  arch/powerpc/cpu/mpc85xx/t1040_serdes.c            |    2 +-
>  arch/powerpc/cpu/mpc85xx/u-boot-spl.lds            |   18 +-
>  arch/powerpc/cpu/mpc85xx/u-boot.lds                |    8 +
>  arch/powerpc/cpu/mpc86xx/cpu.c                     |    2 +-
>  arch/powerpc/cpu/mpc86xx/mpc8610_serdes.c          |    4 +-
>  arch/powerpc/cpu/mpc86xx/mpc8641_serdes.c          |    4 +-
>  arch/powerpc/cpu/mpc8xxx/fsl_ifc.c                 |   60 ++-
>  arch/powerpc/cpu/mpc8xxx/srio.c                    |    4 +-
>  arch/powerpc/include/asm/config_mpc85xx.h          |   13 +-
>  arch/powerpc/include/asm/fsl_ifc.h                 |   95 +++--
>  arch/powerpc/include/asm/fsl_law.h                 |    5 +
>  arch/powerpc/include/asm/immap_85xx.h              |    4 +-
>  board/freescale/b4860qds/tlb.c                     |   19 +
>  board/freescale/bsc9131rdb/Makefile                |   16 +
>  board/freescale/bsc9131rdb/README                  |   18 +-
>  board/freescale/bsc9131rdb/law.c                   |    4 +
>  board/freescale/bsc9131rdb/spl_minimal.c           |  118 ++++++
>  board/freescale/bsc9131rdb/tlb.c                   |   17 +-
>  board/freescale/bsc9132qds/Makefile                |   17 +
>  board/freescale/bsc9132qds/bsc9132qds.c            |    4 +-
>  board/freescale/bsc9132qds/law.c                   |    6 +-
>  board/freescale/bsc9132qds/spl_minimal.c           |  130 +++++++
>  board/freescale/bsc9132qds/tlb.c                   |   27 +-
>  board/freescale/common/Makefile                    |   10 +
>  board/freescale/common/pixis.c                     |    2 +
>  board/freescale/p1010rdb/Makefile                  |   16 +
>  .../freescale/p1010rdb/spl_minimal.c               |   20 +-
>  board/freescale/p1010rdb/tlb.c                     |   13 +-
>  board/freescale/p1023rdb/Makefile                  |   33 ++
>  board/freescale/p1023rdb/ddr.c                     |  105 +++++
>  board/freescale/p1023rdb/law.c                     |   34 ++
>  board/freescale/p1023rdb/p1023rdb.c                |  161 ++++++++
>  board/freescale/p1023rdb/tlb.c                     |  115 ++++++
>  board/freescale/t4qds/tlb.c                        |   19 +
>  boards.cfg                                         |    8 +
>  common/Makefile                                    |   44 ++-
>  doc/README.srio-pcie-boot-corenet                  |   34 +-
>  drivers/mtd/nand/Makefile                          |    1 +
>  .../mtd/nand/fsl_ifc_spl.c                         |   37 +-
>  drivers/pci/fsl_pci_init.c                         |    6 +-
>  include/configs/B4860QDS.h                         |   35 +-
>  include/configs/BSC9131RDB.h                       |   62 ++-
>  include/configs/BSC9132QDS.h                       |   63 ++-
>  include/configs/P1010RDB.h                         |   77 ++--
>  include/configs/P1023RDB.h                         |  401 ++++++++++++++++++++
>  include/configs/P2041RDB.h                         |    1 +
>  include/configs/P3041DS.h                          |    2 +-
>  include/configs/P4080DS.h                          |    2 +-
>  include/configs/P5020DS.h                          |    2 +-
>  include/configs/a3m071.h                           |    1 +
>  include/configs/am335x_evm.h                       |    1 +
>  include/configs/pcm051.h                           |    1 +
>  include/configs/t4qds.h                            |   35 +-
>  lib/Makefile                                       |   14 +-
>  nand_spl/board/freescale/p1010rdb/Makefile         |  142 -------
>  tools/pblimage.c                                   |   32 +-
>  80 files changed, 1831 insertions(+), 393 deletions(-)
>  create mode 100644 board/freescale/bsc9131rdb/spl_minimal.c
>  create mode 100644 board/freescale/bsc9132qds/spl_minimal.c
>  rename nand_spl/board/freescale/p1010rdb/nand_boot.c => board/freescale/p1010rdb/spl_minimal.c (95%)
>  create mode 100644 board/freescale/p1023rdb/Makefile
>  create mode 100644 board/freescale/p1023rdb/ddr.c
>  create mode 100644 board/freescale/p1023rdb/law.c
>  create mode 100644 board/freescale/p1023rdb/p1023rdb.c
>  create mode 100644 board/freescale/p1023rdb/tlb.c
>  rename nand_spl/nand_boot_fsl_ifc.c => drivers/mtd/nand/fsl_ifc_spl.c (88%)
>  create mode 100644 include/configs/P1023RDB.h
>  delete mode 100644 nand_spl/board/freescale/p1010rdb/Makefile

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130625/22009f90/attachment.pgp>


More information about the U-Boot mailing list