[U-Boot] [PATCH 2/3] LaCie/common: add support for the GPIO extension bus

[Prafulla Wadaskar]

> -----Original Message-----
> From: Simon Guinot [mailto:simon.guinot at sequanux.org]
> Sent: 18 June 2013 02:28
> To: Prafulla Wadaskar
> Cc: Albert ARIBAUD; u-boot at lists.denx.de
> Subject: [PATCH 2/3] LaCie/common: add support for the
> GPIO extension bus
> 
> This patch adds support for the GPIO extension bus
> found on some LaCie
> boards (as the 2Big/5Big Network v2 and the 2Big NAS).
> This bus allows
> to configure the devices (mostly the LEDs) connected to
> a CPLD via two
> GPIO-based registers (address and data).

Hi Simon
The name given here for the patch as well as files "gpio-ext" is confusing for me.

As you stated here those are the IOs generated by CPLD on your board which can be programmed using bit-banging on two GPIOs.

So to me it those are "cpld_ios".

May you please rename these files accordingly and resend the patch series for better understanding?

To me "gpio-ext" is generic term application for "General purpose IOs"

Regards...
Prafulla . . .