[U-Boot] [PATCH 0/4] ARM: at91: atmel_nand: check ONFI ecc minimum requirement

[Josh Wu]

in this patch series, first we make the nand driver can dynamic change sector
size and ecc correct bits.
Then we enable ONFI ecc parameters check.

Josh Wu (4):
  ARM: at91: atmel_nand: pmecc driver will select the galois table by
    sector size
  ARM: at91: sama5d3: remove unused definition about PMECC alpha table
    offset
  mtd: atmel_nand: alloc memory instead of use static array for pmecc
    data
  ARM: at91: atmel_nand: add code to check the ONFI parameter ECC
    requirement

 arch/arm/include/asm/arch-at91/at91sam9x5.h |    6 +
 arch/arm/include/asm/arch-at91/sama5d3.h    |    2 -
 doc/README.atmel_pmecc                      |   14 --
 drivers/mtd/nand/atmel_nand.c               |  195 +++++++++++++++++++++++++--
 include/configs/at91sam9x5ek.h              |    1 -
 include/configs/sama5d3xek.h                |    1 -
 6 files changed, 191 insertions(+), 28 deletions(-)

-- 
1.7.9.5