[U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation

[Michael Trimarchi]

Hi
Il giorno 20/giu/2013 09:14, "Axel Lin" <axel.lin at ingics.com> ha scritto:
>
> In current gpio_set_value() implementation, it always sets the gpio
control bit
> no matter the value argument is 0 or 1. Thus the GPIOs never set to low.
> This patch fixes this bug.
>
> Signed-off-by: Axel Lin <axel.lin at ingics.com>
> ---
>  drivers/gpio/spear_gpio.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpio/spear_gpio.c b/drivers/gpio/spear_gpio.c
> index d3c728e..8878608 100644
> --- a/drivers/gpio/spear_gpio.c
> +++ b/drivers/gpio/spear_gpio.c
> @@ -52,7 +52,10 @@ int gpio_set_value(unsigned gpio, int value)
>  {
>         struct gpio_regs *regs = (struct gpio_regs *)CONFIG_GPIO_BASE;
>
> -       writel(1 << gpio, &regs->gpiodata[DATA_REG_ADDR(gpio)]);
> +       if (value)
> +               writel(1 << gpio, &regs->gpiodata[DATA_REG_ADDR(gpio)]);
> +       else
> +               writel(0, &regs->gpiodata[DATA_REG_ADDR(gpio)]);
>
>         return 0;
>  }

Does it work the clear? Seems that it sets to 0 all the bank. I'm using the
mobile

Michael

> --
> 1.8.1.2
>
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot