[U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1

[Lubomir Popov]

Hi Lokesh,

On 06/06/13 14:26, Lokesh Vutla wrote:
> Hi Lubomir,
> On Thursday 06 June 2013 12:55 PM, Lubomir Popov wrote:
>> Hi Tom,
>>
>> On 05/06/13 16:45, Tom Rini wrote:
>>> On Wed, Jun 05, 2013 at 11:03:26AM +0300, Lubomir Popov wrote:
>>>
[snip]
>>>
>>> OK, lets see.  That so lets keep your patch as-is, since we've now got
>>> -ffunction-sections/-fdata-sections/--gc-sections on ARM for main
>>> U-Boot, these small things won't hurt like they used to.
>>>
>> OK, but then I would like to do some cleanup first - remove the audio
>> power stuff (shall have it in my board file), as well as either sort out
>> the function naming:
>>
>> - Those functions that are specific to a SoC+PMIC combination are
>> named e.g. twl603x_... or tps659038_... so that they explicitly
>> indicate the hardware that they are working with (actually almost all
>> functions are such). This is however sort of regression, and requires
>> fixes in the files calling these functions;
>>
>> or, alternatively:
>>
>> - Introduce generic functions with fixed names, palmas_bla_bla(),
>> sort of wrappers, which in their bodies perform the appropriate action
>> based on the #ifdefs defining the platform hardware (where we could also
>> define the particular LDO which for example a palmas_mmc1_poweron_ldo()
>> generic function would manipulate). Drawback: again #ifdefs.
>> Advantage: single place where this stuff is located, and where other
>> PMIC/LDO combinations can be added without affecting other code.
> I think, we can have function pointers for and can populate data in the
> beginning or from board file based on Soc, similarly what we did for
> prcm structure.
> Regards,
> Lokesh
OK, sounds reasonable. I think this should be done in a future release
however, after careful investigation and planning. At present, I guess,
we are staying with the current situation.

Today I shall submit an updated version of my patch to the palmas
driver - sort of compromise between clean code and ease of use. I
have included your stuff there, so should work out of the box on
the dra7xx_evm. Please note that now we have a semi-generic function
to power on the appropriate SDMMC LDO: the old palmas_mmc1_poweron_ldo(),
which you shall have to call in omap_hsmmc. Differentiation of which
particular LDO to control within which PMIC is done in driver, based
on the board #ifdefs.

If Tom approves this patch and applies it, we shall all be happy with
working boards, although the code may not be perfect.

I would also like to ask you to send me a Register Manual of the
TPS659038/9, if possible. If you have any NDA concerns, then just
check if the LDO1 control register has a BYPASS option and tell
me. Thanks.

Best regards,
Lubo