[U-Boot] [PATCH 09/11] powerpc/mpc8xxx: Add x4 DDR device support

York Sun yorksun at freescale.com
Tue Jun 25 20:37:47 CEST 2013


On selected platforms, x4 DDR devices can be supported. Using x4 devices may
lower the performance, but generally they are available for higher density.

Tested on MT36JSF2G72PZ-1G9E1 RDIMM.

Signed-off-by: York Sun <yorksun at freescale.com>
---
 arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c        |    4 ++++
 arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c |    1 +
 arch/powerpc/cpu/mpc8xxx/ddr/interactive.c      |    4 ++++
 arch/powerpc/cpu/mpc8xxx/ddr/options.c          |    2 ++
 arch/powerpc/include/asm/fsl_ddr_dimm_params.h  |    1 +
 arch/powerpc/include/asm/fsl_ddr_sdram.h        |    1 +
 6 files changed, 13 insertions(+)

diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index a6f8d95..3a63a04 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -684,6 +684,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
 	unsigned int odt_cfg = 0;	/* ODT configuration */
 	unsigned int num_pr;		/* Number of posted refreshes */
 	unsigned int slow = 0;		/* DDR will be run less than 1250 */
+	unsigned int x4_en = 0;		/* x4 DRAM enable */
 	unsigned int obc_cfg;		/* On-The-Fly Burst Chop Cfg */
 	unsigned int ap_en;		/* Address Parity Enable */
 	unsigned int d_init;		/* DRAM data initialization */
@@ -728,6 +729,8 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
 		ap_en = 0;
 	}
 
+	x4_en = popts->x4_en ? 1 : 0;
+
 #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 	/* Use the DDR controller to auto initialize memory. */
 	d_init = popts->ECC_init_using_memctl;
@@ -750,6 +753,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
 		| ((odt_cfg & 0x3) << 21)
 		| ((num_pr & 0xf) << 12)
 		| ((slow & 1) << 11)
+		| (x4_en << 10)
 		| (qd_en << 9)
 		| (unq_mrs_en << 8)
 		| ((obc_cfg & 0x1) << 6)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
index 3e7c269..b67158c 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
@@ -129,6 +129,7 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 		pdimm->ec_sdram_width = 0;
 	pdimm->data_width = pdimm->primary_sdram_width
 			  + pdimm->ec_sdram_width;
+	pdimm->device_width = 1 << ((spd->organization & 0x7) + 2);
 
 	/* These are the types defined by the JEDEC DDR3 SPD spec */
 	pdimm->mirrored_dimm = 0;
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
index 46257c9..2bc3516 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
@@ -207,6 +207,7 @@ static void fsl_ddr_dimm_parameters_edit(fsl_ddr_info_t *pinfo,
 		DIMM_PARM(primary_sdram_width),
 		DIMM_PARM(ec_sdram_width),
 		DIMM_PARM(registered_dimm),
+		DIMM_PARM(device_width),
 
 		DIMM_PARM(n_row_addr),
 		DIMM_PARM(n_col_addr),
@@ -265,6 +266,7 @@ static void print_dimm_parameters(const dimm_params_t *pdimm)
 		DIMM_PARM(primary_sdram_width),
 		DIMM_PARM(ec_sdram_width),
 		DIMM_PARM(registered_dimm),
+		DIMM_PARM(device_width),
 
 		DIMM_PARM(n_row_addr),
 		DIMM_PARM(n_col_addr),
@@ -445,6 +447,7 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo,
 		CTRL_OPTIONS(twoT_en),
 		CTRL_OPTIONS(threeT_en),
 		CTRL_OPTIONS(ap_en),
+		CTRL_OPTIONS(x4_en),
 		CTRL_OPTIONS(bstopre),
 		CTRL_OPTIONS(wrlvl_override),
 		CTRL_OPTIONS(wrlvl_sample),
@@ -689,6 +692,7 @@ static void print_memctl_options(const memctl_options_t *popts)
 		CTRL_OPTIONS(threeT_en),
 		CTRL_OPTIONS(registered_dimm_en),
 		CTRL_OPTIONS(ap_en),
+		CTRL_OPTIONS(x4_en),
 		CTRL_OPTIONS(bstopre),
 		CTRL_OPTIONS(wrlvl_override),
 		CTRL_OPTIONS(wrlvl_sample),
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
index 2f13b8f..e02d76d 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
@@ -703,6 +703,8 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
 	}
 #endif
 
+	popts->x4_en = (pdimm[0].device_width == 4) ? 1 : 0;
+
 	/* Choose burst length. */
 #if defined(CONFIG_FSL_DDR3)
 #if defined(CONFIG_E500MC)
diff --git a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h
index ffe4db8..bd312ad 100644
--- a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h
+++ b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h
@@ -26,6 +26,7 @@ typedef struct dimm_params_s {
 	unsigned int primary_sdram_width;
 	unsigned int ec_sdram_width;
 	unsigned int registered_dimm;
+	unsigned int device_width;	/* x4, x8, x16 components */
 
 	/* SDRAM device parameters */
 	unsigned int n_row_addr;
diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h
index 640d329..bac22fc 100644
--- a/arch/powerpc/include/asm/fsl_ddr_sdram.h
+++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h
@@ -277,6 +277,7 @@ typedef struct memctl_options_s {
 	unsigned int mirrored_dimm;
 	unsigned int quad_rank_present;
 	unsigned int ap_en;	/* address parity enable for RDIMM */
+	unsigned int x4_en;	/* enable x4 devices */
 
 	/* Global Timing Parameters */
 	unsigned int cas_latency_override;
-- 
1.7.9.5




More information about the U-Boot mailing list