[U-Boot] [PATCH v2 3/3] ARM: Congatec: README update

SARTRE Leo lsartre at adeneo-embedded.com
Thu Jun 20 15:46:50 CEST 2013


README: U-boot works both on SPI-NOR and SDcard

Signed-off-by: Leo Sartre <lsartre at adeneo-embedded.com>
---
 board/congatec/cgtqmx6eval/README |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/board/congatec/cgtqmx6eval/README b/board/congatec/cgtqmx6eval/README
index bbf0f75..5e76d2a 100644
--- a/board/congatec/cgtqmx6eval/README
+++ b/board/congatec/cgtqmx6eval/README
@@ -7,8 +7,7 @@ Conga-QEVAl Evaluation Carrier board with qmx6 quad module.
 1. Boot source, boot from SD card
 ---------------------------------
 
-This version of u-boot works only on the SD card. By default, the
-Congatec board can boot only from the SPI-NOR.
+By default, the Congatec board can boot only from the SPI-NOR.
 But, with the u-boot version provided with the board you can write boot
 registers to force the board to reboot and boot from the SD slot. If
 "bmode" command is not available from your pre-installed u-boot, these
-- 
1.7.10.4


More information about the U-Boot mailing list