[U-Boot] [PATCH] mmc: mx6qsabrelite: fsl_esdhc: Define maximum bus width supported by SabreLite board

[Eric Nelson]

Hi Abbas,

On 03/25/2013 04:02 AM, Abbas Raza wrote:
> Hi,
>
> On 03/21/2013 09:17 PM, Eric Nelson wrote:
>> Thanks Abbas,
>>
>> Tested-by: Eric Nelson <eric.nelson at boundarydevices.com>
>>
>> Note that the board settings also apply to nitrogen6x and wandboard
>> if you want to expand the patch a bit:
>>
>>      http://git.denx.de/u-boot.git/?p=u-boot/u-boot-imx.git;a=blob;f=board/boundary/nitrogen6x/nitrogen6x.c;h=229c2378396d43a365d6682af35c0e519ccd69d4;hb=HEAD#l304
>>      http://git.denx.de/u-boot.git/?p=u-boot/u-boot-imx.git;a=blob;f=board/wandboard/wandboard.c;h=d95189f77de4c3573ec30c53e04fe1b083c1d2b5;hb=HEAD#l107
>
> I would like to expand the patch but i cannot test it for boards you mentioned above. Are you sure these boards have 4-bit mmc buses?
>

I'm certain about the Nitrogen6x. Less so about Wandboard.

I think I looked it up, but can't recall precisely.