[U-Boot] [PATCH v2] vf610twr: Drop unneeded 'status' variable

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

No need to use the 'status' variable, so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v1:
- Drop status variable

 board/freescale/vf610twr/vf610twr.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/board/freescale/vf610twr/vf610twr.c b/board/freescale/vf610twr/vf610twr.c
index 04fa882..f14df8b 100644
--- a/board/freescale/vf610twr/vf610twr.c
+++ b/board/freescale/vf610twr/vf610twr.c
@@ -301,16 +301,13 @@ int board_mmc_init(bd_t *bis)
 		NEW_PAD_CTRL(VF610_PAD_PTA28__ESDHC1_DAT2, ESDHC_PAD_CTRL),
 		NEW_PAD_CTRL(VF610_PAD_PTA29__ESDHC1_DAT3, ESDHC_PAD_CTRL),
 	};
-	s32 status = 0;
 
 	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 
 	imx_iomux_v3_setup_multiple_pads(
 		esdhc1_pads, ARRAY_SIZE(esdhc1_pads));
 
-	status |= fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
-
-	return status;
+	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
 }
 #endif
 
-- 
1.8.1.2