[U-Boot] [PATCH] powerpc/mpc85xx:Add iprot input arg in create_TLB0/1_entry
Prabhakar Kushwaha
prabhakar at freescale.com
Tue Jun 4 12:24:41 CEST 2013
create_tlb1_entry and create_tlb0_entry creates TLB entries with IPROT
bit set by default. Any TLB entries with IPROT = 1 can not be invalidated.
Add IPROT as input argument for TLB entry creation APIs.
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
---
Based upon git://git.denx.de/u-boot.git branch master
arch/powerpc/cpu/mpc85xx/start.S | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 4f0480b..cbe166d 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -174,11 +174,11 @@ l2_disabled:
mtspr DBSR,r1 /* Clear all valid bits */
- .macro create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch
+ .macro create_tlb1_entry esel iprot ts tsize epn wimg rpn perm phy_high scratch
lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l
mtspr MAS0, \scratch
- lis \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@h
+ lis \scratch, FSL_BOOKE_MAS1(1, \iprot, 0, \ts, \tsize)@h
ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@l
mtspr MAS1, \scratch
lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
@@ -196,11 +196,11 @@ l2_disabled:
isync
.endm
- .macro create_tlb0_entry esel ts tsize epn wimg rpn perm phy_high scratch
+ .macro create_tlb0_entry esel iprot ts tsize epn wimg rpn perm phy_high scratch
lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h
ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l
mtspr MAS0, \scratch
- lis \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@h
+ lis \scratch, FSL_BOOKE_MAS1(1, \iprot, 0, \ts, \tsize)@h
ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@l
mtspr MAS1, \scratch
lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
@@ -357,7 +357,7 @@ l2_disabled:
*/
/* create a temp mapping TLB0[0] for LBCR */
- create_tlb0_entry 0, \
+ create_tlb0_entry 0, 1,\
0, BOOKE_PAGESZ_4K, \
CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G, \
CONFIG_SYS_LBC_ADDR, MAS3_SW|MAS3_SR, \
@@ -484,14 +484,14 @@ nexti: mflr r1 /* R1 = our PC */
* bacause flash's virtual address maps to 0xff800000 - 0xffffffff.
* and this window is outside of 4K boot window.
*/
- create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, 0,\
0, BOOKE_PAGESZ_4M, \
CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \
0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
- create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, 0,\
0, BOOKE_PAGESZ_1M, \
CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
@@ -501,7 +501,7 @@ nexti: mflr r1 /* R1 = our PC */
* TLB entry is created for IVPR + IVOR15 to map on valid OP code address
* because "nexti" will resize TLB to 4K
*/
- create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, 0,\
0, BOOKE_PAGESZ_256K, \
CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS2_I, \
CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS3_SX|MAS3_SW|MAS3_SR, \
@@ -536,7 +536,7 @@ create_ccsr_new_tlb:
ori r8, r8, CONFIG_SYS_CCSRBAR at l
lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h
ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l
- create_tlb0_entry 0, \
+ create_tlb0_entry 0, 1,\
0, BOOKE_PAGESZ_4K, \
CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, \
CONFIG_SYS_CCSRBAR_PHYS_LOW, MAS3_SW|MAS3_SR, \
@@ -546,7 +546,7 @@ create_ccsr_new_tlb:
* for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000).
*/
create_ccsr_old_tlb:
- create_tlb0_entry 1, \
+ create_tlb0_entry 1, 1,\
0, BOOKE_PAGESZ_4K, \
CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, \
CONFIG_SYS_CCSRBAR_DEFAULT, MAS3_SW|MAS3_SR, \
@@ -712,7 +712,7 @@ create_ccsr_l2_tlb:
* Create a TLB for the MMR location of CCSR
* to access L2CSR0 register
*/
- create_tlb0_entry 0, \
+ create_tlb0_entry 0, 1\
0, BOOKE_PAGESZ_4K, \
CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, \
CONFIG_SYS_CCSRBAR_PHYS_LOW + 0xC20000, MAS3_SW|MAS3_SR, \
@@ -1041,7 +1041,7 @@ create_init_ram_area:
#ifdef NOR_BOOT
/* create a temp mapping in AS=1 to the 4M boot window */
- create_tlb1_entry 15, \
+ create_tlb1_entry 15, 1,\
1, BOOKE_PAGESZ_4M, \
CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \
0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
@@ -1051,7 +1051,7 @@ create_init_ram_area:
/* create a temp mapping in AS = 1 for Flash mapping
* created by PBL for ISBC code
*/
- create_tlb1_entry 15, \
+ create_tlb1_entry 15, 1,\
1, BOOKE_PAGESZ_1M, \
CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
CONFIG_SYS_PBI_FLASH_WINDOW & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
@@ -1061,7 +1061,7 @@ create_init_ram_area:
* create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main
* image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage.
*/
- create_tlb1_entry 15, \
+ create_tlb1_entry 15, 1,\
1, BOOKE_PAGESZ_1M, \
CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
@@ -1071,14 +1071,14 @@ create_init_ram_area:
/* create a temp mapping in AS=1 to the stack */
#if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \
defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH)
- create_tlb1_entry 14, \
+ create_tlb1_entry 14, 1,\
1, BOOKE_PAGESZ_16K, \
CONFIG_SYS_INIT_RAM_ADDR, 0, \
CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, MAS3_SX|MAS3_SW|MAS3_SR, \
CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH, r6
#else
- create_tlb1_entry 14, \
+ create_tlb1_entry 14, 1,\
1, BOOKE_PAGESZ_16K, \
CONFIG_SYS_INIT_RAM_ADDR, 0, \
CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, \
--
1.7.9.5
More information about the U-Boot
mailing list