[U-Boot] please pull u-boot-samsung master

[Jagan Teki]

On Wed, Jun 19, 2013 at 5:24 PM, Albert ARIBAUD
<albert.u.boot at aribaud.net> wrote:
> Hi Jagan,
>
> On Wed, 19 Jun 2013 17:19:36 +0530, Jagan Teki
> <jagannadh.teki at gmail.com> wrote:
>
>> On Wed, Jun 19, 2013 at 6:09 AM, Minkyu Kang <mk7.kang at samsung.com> wrote:
>> > On 18/06/13 23:57, Albert ARIBAUD wrote:
>> >> Hi Minkyu,
>> >>
>> >> On Mon, 17 Jun 2013 13:16:20 +0530, Jagan Teki
>> >> <jagannadh.teki at gmail.com> wrote:
>> >>
>> >>> On Mon, Jun 17, 2013 at 7:40 AM, Minkyu Kang <mk7.kang at samsung.com> wrote:
>> >>>> Dear Albert,
>> >>>>
>> >>>> The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:
>> >>>>
>> >>>>   at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
>> >>>>
>> >>>> are available in the git repository at:
>> >>>>
>> >>>>   git://git.denx.de/u-boot-samsung master
>> >>>>
>> >>>> for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:
>> >>>>
>> >>>>   MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)
>> >>>>
>> >>>> ----------------------------------------------------------------
>> >>>> Akshay Saraswat (2):
>> >>>>       Exynos5: clock: Update the equation to calculate PLL output frequency
>> >>>>       Exynos: uart: s5p: enabling the uart tx/rx fifo
>> >>>>
>> >>>> Amar (9):
>> >>>>       FDT: Add compatible string for DWMMC
>> >>>>       EXYNOS5: FDT: Add DWMMC device node data
>> >>>>       DWMMC: Initialise dwmci and resolve EMMC read write issues
>> >>>>       EXYNOS5: DWMMC: Added FDT support for DWMMC
>> >>>>       EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
>> >>>>       SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
>> >>>>       MMC: APIs to support resize of EMMC boot partition
>> >>>>       SMDK5250: Enable EMMC booting
>> >>>>       COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
>> >>>>
>> >>>> Arkadiusz Wlodarczyk (1):
>> >>>>       arm:trats: change auto-booting to boot kernel with separate device tree blob
>> >>>>
>> >>>> Inderpal Singh (3):
>> >>>>       exynos: move tzpc_init to armv7/exynos
>> >>>>       exynos: update tzpc to make it common for exynos4 and exynos5
>> >>>>       exynos: Update origen and smdkv310 to use common tzpc_init
>> >>>>
>> >>>> Naveen Krishna Chatradhi (2):
>> >>>>       power: exynos-tmu: fix warnings and clean up code
>> >>>>       power: exynos-tmu: use the mux_addr bit fields in tmu_control register
>> >>>>
>> >>>> Rajeshwari Shinde (3):
>> >>>>       SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
>> >>>>       SMDK5250: Enable SPI Gigabyte device.
>> >>>
>> >>> SPI gigabyte flash driver is not available in drivers/mtd/spi/
>> >>> Am i missing anything here, please help.
>> >
>> > gigabyte flash driver is available in drivers/mtd/spi/
>> > please refer below link.
>> > http://git.denx.de/?p=u-boot/u-boot-samsung.git;a=blob;f=drivers/mtd/spi/gigadevice.c;
>>
>> My question is the driver is not yet in main line, but patch
>> " SMDK5250: Enable SPI Gigabyte device."
>> is enabling the driver CONFIG_* into smdk5250 configuration entries.
>>
>> Is this valid, please correct me if am wrong.
>
> Doesn't patch "SMDK5250: Enable SPI Gigabyte device" immediately follow
> patch "SF: Add driver for Gigabyte device GD25LQ and GD25Q64B" which
> creates said device?

OK I couldn't observer actual commit prefix for this gigabyte flash driver.
May it could have sf: gigabyte:

Any way please continue-

--
Thanks,
Jagan.

>
>> --
>> Thanks,
>> Jagan.
>
> Amicalement,
> --
> Albert.