[U-Boot] [PATCH v3] Add support for Wandboard Quad

[Stefano Babic]

Hi Tapani,

On 26/06/2013 11:51, Tapani wrote:
> 
> Add support for the Quad version of Wandboard; fix compile warning resulting
> from having 2G of memory.
> 
> Signed-off-by: Tapani Utriainen <tapani at technexion.com>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
> ---
>  board/wandboard/README      | 5 +++++
>  board/wandboard/wandboard.c | 2 +-
>  boards.cfg                  | 1 +
>  include/configs/wandboard.h | 2 ++
>  4 files changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/board/wandboard/README b/board/wandboard/README
> index ce83bbe..498db2f 100644
> --- a/board/wandboard/README
> +++ b/board/wandboard/README
> @@ -22,6 +22,11 @@ To build U-Boot for the Wandboard Solo version:
>  $ make wandboard_solo_config
>  $ make
>  
> +To build U-Boot for the Wandboard Quad version:
> +
> +$ make wandboard_quad_config
> +$ make
> +
>  Flashing U-boot into the SD card
>  --------------------------------
>  
> diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
> index 5666cbf..43c02ac 100644
> --- a/board/wandboard/wandboard.c
> +++ b/board/wandboard/wandboard.c
> @@ -48,7 +48,7 @@ DECLARE_GLOBAL_DATA_PTR;
>  
>  int dram_init(void)
>  {
> -       gd->ram_size = CONFIG_DDR_MB * SZ_1M;
> +       gd->ram_size = (phys_size_t)CONFIG_DDR_MB * 1024 * 1024;
>  
>         return 0;
>  }
> diff --git a/boards.cfg b/boards.cfg
> index fff4f45..2635942 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -272,6 +272,7 @@ nitrogen6q2g                 arm         armv7       nitrogen6x          boundar
>  nitrogen6s                   arm         armv7       nitrogen6x          boundary       mx6            nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512
>  nitrogen6s1g                 arm         armv7       nitrogen6x          boundary       mx6            nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024
>  wandboard_dl                arm         armv7       wandboard           -              mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024
> +wandboard_quad              arm         armv7       wandboard           -              mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048
>  wandboard_solo              arm         armv7       wandboard           -              mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512
>  omap3_overo                  arm         armv7       overo               -              omap3
>  omap3_pandora                arm         armv7       pandora             -              omap3
> diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
> index 5593f1c..b2995d8 100644
> --- a/include/configs/wandboard.h
> +++ b/include/configs/wandboard.h
> @@ -103,6 +103,8 @@
>  
>  #if defined(CONFIG_MX6DL)
>  #define CONFIG_DEFAULT_FDT_FILE                "imx6dl-wandboard.dtb"
> +#elif defined(CONFIG_MX6Q)
> +#define CONFIG_DEFAULT_FDT_FILE                "imx6q-wandboard.dtb"
>  #elif defined(CONFIG_MX6S)
>  #define CONFIG_DEFAULT_FDT_FILE                "imx6s-wandboard.dtb"
>  #endif

Patch does not apply cleanly because your mailer or your editor replaced
original <tab> with whitespaces. I change back again, but please take
care of this issue for the next time.

Apart of that:

Acked-by: Stefano Babic <sbabic at denx.de>

This patch was pending for a while, I will push it still for the release.

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================