[U-Boot] [PATCH v4 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114

[Thierry Reding]

On Thu, Jun 20, 2013 at 04:13:38PM +0800, Jim Lin wrote:
> Add DT node for USB EHCI function.
> Add support for T30-Cardhu, T30-Beaver, T114-Dalmore boards.
> 
> Signed-off-by: Jim Lin <jilin at nvidia.com>
> ---
> Changes in v2:
>  - Remove PLL parameters from dt file
> Changes in v3:
>  - Change VBus GPIO from H.05 to DD.04 for Beaver board.
> Changes in v4:
>  - Change Beaver VBus GPIO to H.05 and value to 0 for polarity to be High.
>    I don't have Beaver board. So this needs somebody to help test.
>    Thanks.

Why did you change it back to H.05 again? I already tested successfully
that DD.04 is the right one.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130620/7e3fedf4/attachment.pgp>