[U-Boot] [PATCH v4 3/3] Add TI816X evm board support

TENART Antoine atenart at adeneo-embedded.com
Wed Jun 19 12:08:21 CEST 2013


Signed-off-by: Antoine Tenart <atenart at adeneo-embedded.com>
---
 MAINTAINERS                  |    4 +
 board/ti/ti816x/Makefile     |   47 ++++++++
 board/ti/ti816x/evm.c        |  249 ++++++++++++++++++++++++++++++++++++++++++
 boards.cfg                   |    1 +
 include/configs/ti816x_evm.h |  188 +++++++++++++++++++++++++++++++
 5 files changed, 489 insertions(+)
 create mode 100644 board/ti/ti816x/Makefile
 create mode 100644 board/ti/ti816x/evm.c
 create mode 100644 include/configs/ti816x_evm.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 7820375..38ff5c3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -940,6 +940,10 @@ Lucas Stach <dev at lynxeye.de>
 
 	colibri_t20_iris	Tegra20 (ARM7 & A9 Dual Core)
 
+Antoine Tenart <atenart at adeneo-embedded.com>
+
+	TI816X		ARM ARMV7 (TI816x Soc)
+
 Nick Thompson <nick.thompson at gefanuc.com>
 
 	da830evm	ARM926EJS (DA830/OMAP-L137)
diff --git a/board/ti/ti816x/Makefile b/board/ti/ti816x/Makefile
new file mode 100644
index 0000000..dc23d93
--- /dev/null
+++ b/board/ti/ti816x/Makefile
@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+# Antoine Tenart, <atenart at adeneo-embedded.com>
+#
+# Based on TI-PSP-04.00.02.14 :
+#
+# Copyright (C) 2009, Texas Instruments, Incorporated
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation version 2.
+#
+# This program is distributed "as is" WITHOUT ANY WARRANTY of any
+# kind, whether express or implied; without even the implied warranty
+# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= evm.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
new file mode 100644
index 0000000..12e98d5
--- /dev/null
+++ b/board/ti/ti816x/evm.c
@@ -0,0 +1,249 @@
+/*
+ * evm.c
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart at adeneo-embedded.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+	return 0;
+}
+
+#if defined(CONFIG_SPL_BUILD)
+
+static struct module_pin_mux mmc_pin_mux[] = {
+	{ OFFSET(pincntl157), PULLDOWN_EN | PULLUDDIS | MODE(0x0) },
+	{ OFFSET(pincntl158), PULLDOWN_EN | PULLUDEN | MODE(0x0) },
+	{ OFFSET(pincntl159), PULLUP_EN | PULLUDDIS | MODE(0x0) },
+	{ OFFSET(pincntl160), PULLUP_EN | PULLUDDIS | MODE(0x0) },
+	{ OFFSET(pincntl161), PULLUP_EN | PULLUDDIS | MODE(0x0) },
+	{ OFFSET(pincntl162), PULLUP_EN | PULLUDDIS | MODE(0x0) },
+	{ OFFSET(pincntl163), PULLUP_EN | PULLUDDIS | MODE(0x0) },
+	{ -1 },
+};
+
+const struct dmm_lisa_map_regs evm_lisa_map_regs = {
+	.dmm_lisa_map_0 = 0x00000000,
+	.dmm_lisa_map_1 = 0x00000000,
+	.dmm_lisa_map_2 = 0x80640300,
+	.dmm_lisa_map_3 = 0xC0640320,
+};
+
+/*
+ * DDR2 related definitions
+ */
+
+static struct ddr_data ddr2_data = {
+	.datardsratio0		= ((0x40<<10) | (0x40<<0)),
+	.datawdsratio0		= ((0x4A<<10) | (0x4A<<0)),
+	.datawiratio0		= ((0x0<<10) | (0x0<<0)),
+	.datagiratio0		= ((0x0<<10) | (0x0<<0)),
+	.datafwsratio0		= ((0x13A<<10) | (0x13A<<0)),
+	.datawrsratio0		= ((0x8A<<10) | (0x8A<<0)),
+	.datauserank0delay	= 0x1,
+	.datadldiff0		= 0x0, /* depend on cpu rev, set later */
+};
+
+static struct cmd_control ddr2_ctrl = {
+	.cmd0csratio	= 0x80,
+	.cmd0dldiff	= 0x04, /* reset value is 0x4 */
+	.cmd0iclkout	= 0x00,
+
+	.cmd1csratio	= 0x80,
+	.cmd1dldiff	= 0x04,
+	.cmd1iclkout	= 0x00,
+
+	.cmd2csratio	= 0x80,
+	.cmd2dldiff	= 0x04,
+	.cmd2iclkout	= 0x00,
+
+};
+
+static struct emif_regs ddr2_emif0_regs = {
+	.sdram_config		= 0x43801A3A,
+	.ref_ctrl		= 0x10000C30,
+	.sdram_tim1		= 0x0AAB15E2,
+	.sdram_tim2		= 0x423631D2,
+	.sdram_tim3		= 0x0080032F,
+	.emif_ddr_phy_ctlr_1	= 0x0, /* depend on cpu rev, set later */
+};
+
+static struct emif_regs ddr2_emif1_regs = {
+	.sdram_config		= 0x43801A3A,
+	.ref_ctrl		= 0x10000C30,
+	.sdram_tim1		= 0x0AAB15E2,
+	.sdram_tim2		= 0x423631D2,
+	.sdram_tim3		= 0x0080032F,
+	.emif_ddr_phy_ctlr_1	= 0x0, /* depend on cpu rev, set later */
+};
+
+/*
+ * DDR3 related definitions
+ */
+
+#if defined(CONFIG_TI816X_DDR_PLL_400)
+#define RD_DQS		0x03B
+#define WR_DQS		0x0A6
+#define RD_DQS_GATE	0x12A
+#define EMIF_SDCFG	0x62A41032
+#define EMIF_SDREF	0x10000C30
+#define EMIF_TIM1	0x0CCCE524
+#define EMIF_TIM2	0x30308023
+#define EMIF_TIM3	0x009F82CF
+#define EMIF_PHYCFG	0x0000010B
+#elif defined(CONFIG_TI816X_DDR_PLL_531)
+#define RD_DQS		0x039
+#define WR_DQS		0x0B4
+#define RD_DQS_GATE	0x13D
+#define EMIF_SDCFG	0x62A51832
+#define EMIF_SDREF	0x1000102E
+#define EMIF_TIM1	0x0EF136AC
+#define EMIF_TIM2	0x30408063
+#define EMIF_TIM3	0x009F83AF
+#define EMIF_PHYCFG	0x0000010C
+#elif defined(CONFIG_TI816X_DDR_PLL_675)
+#define RD_DQS		0x039
+#define WR_DQS		0x091
+#define RD_DQS_GATE	0x196
+#define EMIF_SDCFG	0x62A63032
+#define EMIF_SDREF	0x10001491
+#define EMIF_TIM1	0x13358875
+#define EMIF_TIM2	0x5051806C
+#define EMIF_TIM3	0x009F84AF
+#define EMIF_PHYCFG	0x0000010F
+#elif defined(CONFIG_TI816X_DDR_PLL_796)
+#define RD_DQS		0x035
+#define WR_DQS		0x093
+#define RD_DQS_GATE	0x1B3
+#define EMIF_SDCFG	0x62A73832
+#define EMIF_SDREF	0x10001841
+#define EMIF_TIM1	0x1779C9FE
+#define EMIF_TIM2	0x50608074
+#define EMIF_TIM3	0x009F857F
+#define EMIF_PHYCFG	0x00000110
+#endif
+
+static struct ddr_data ddr3_data = {
+	.datardsratio0		= ((RD_DQS<<10) | (RD_DQS<<0)),
+	.datawdsratio0		= ((WR_DQS<<10) | (WR_DQS<<0)),
+	.datawiratio0		= ((0x20<<10) | 0x20<<0),
+	.datagiratio0		= ((0x20<<10) | 0x20<<0),
+	.datafwsratio0		= ((RD_DQS_GATE<<10) | (RD_DQS_GATE<<0)),
+	.datawrsratio0		= (((WR_DQS+0x40)<<10) | ((WR_DQS+0x40)<<0)),
+	.datauserank0delay	= 0x1,
+	.datadldiff0		= 0x0, /* depend on cpu rev, set later */
+};
+
+static const struct cmd_control ddr3_ctrl = {
+	.cmd0csratio	= 0x100,
+	.cmd0dldiff	= 0x004, /* reset value is 0x4 */
+	.cmd0iclkout	= 0x001,
+
+	.cmd1csratio	= 0x100,
+	.cmd1dldiff	= 0x004,
+	.cmd1iclkout	= 0x001,
+
+	.cmd2csratio	= 0x100,
+	.cmd2dldiff	= 0x004,
+	.cmd2iclkout	= 0x001,
+};
+
+static const struct emif_regs ddr3_emif0_regs = {
+	.sdram_config		= EMIF_SDCFG,
+	.ref_ctrl		= EMIF_SDREF,
+	.sdram_tim1		= EMIF_TIM1,
+	.sdram_tim2		= EMIF_TIM2,
+	.sdram_tim3		= EMIF_TIM3,
+	.emif_ddr_phy_ctlr_1	= EMIF_PHYCFG,
+};
+
+static const struct emif_regs ddr3_emif1_regs = {
+	.sdram_config		= EMIF_SDCFG,
+	.ref_ctrl		= EMIF_SDREF,
+	.sdram_tim1		= EMIF_TIM1,
+	.sdram_tim2		= EMIF_TIM2,
+	.sdram_tim3		= EMIF_TIM3,
+	.emif_ddr_phy_ctlr_1	= EMIF_PHYCFG,
+};
+#endif /* CONFIG_SPL_BUILD */
+
+
+void s_init(void)
+{
+#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_ARCH_CPU_INIT
+	/*
+	 * Save the boot parameters passed by romcode.
+	 * Do it first to prevent overwrites.
+	 */
+	save_omap_boot_params();
+#endif
+
+	pll_init();
+
+	configure_module_pin_mux(mmc_pin_mux);
+
+	gd = &gdata;
+
+	preloader_console_init();
+
+#ifdef CONFIG_TI816X_EVM_DDR2
+	ddr2_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
+	ddr2_ctrl.cmd0dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
+	ddr2_ctrl.cmd1dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
+	ddr2_ctrl.cmd2dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
+
+	if (CONFIG_TI816X_USE_EMIF0) {
+		ddr2_emif0_regs.emif_ddr_phy_ctlr_1 =
+			(get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B);
+		config_ddr(0, 0, &ddr2_data, &ddr2_ctrl, &ddr2_emif0_regs, 0);
+	}
+
+	if (CONFIG_TI816X_USE_EMIF1) {
+		ddr2_emif1_regs.emif_ddr_phy_ctlr_1 =
+			(get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B);
+		config_ddr(1, 0, &ddr2_data, &ddr2_ctrl, &ddr2_emif1_regs, 1);
+	}
+#endif
+
+#ifdef CONFIG_TI816X_EVM_DDR3
+	ddr3_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
+
+	if (CONFIG_TI816X_USE_EMIF0)
+		config_ddr(0, 0, &ddr3_data, &ddr3_ctrl, &ddr3_emif0_regs, 0);
+
+	if (CONFIG_TI816X_USE_EMIF1)
+		config_ddr(1, 0, &ddr3_data, &ddr3_ctrl, &ddr3_emif0_regs, 1);
+#endif
+
+	config_dmm(&evm_lisa_map_regs);
+#endif
+}
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+int board_mmc_init(bd_t *bis)
+{
+	omap_mmc_init(0, 0, 0, -1, -1);
+	return 0;
+}
+#endif
diff --git a/boards.cfg b/boards.cfg
index 1e598cb..95e19a1 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -250,6 +250,7 @@ am335x_evm_uart4             arm         armv7       am335x              ti
 am335x_evm_uart5             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL6,CONS_INDEX=6
 am335x_evm_usbspl            arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1,SPL_USBETH_SUPPORT
 ti814x_evm                   arm         armv7       ti814x              ti             am33xx
+ti816x_evm                   arm         armv7       ti816x              ti             am33xx
 pcm051                       arm         armv7       pcm051              phytec         am33xx      pcm051
 sama5d3xek_mmc               arm         armv7       sama5d3xek          atmel          at91        sama5d3xek:SAMA5D3,SYS_USE_MMC
 sama5d3xek_nandflash         arm         armv7       sama5d3xek          atmel          at91        sama5d3xek:SAMA5D3,SYS_USE_NANDFLASH
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
new file mode 100644
index 0000000..93ad74c
--- /dev/null
+++ b/include/configs/ti816x_evm.h
@@ -0,0 +1,188 @@
+/*
+ * ti816x_evm.h
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart at adeneo-embedded.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef __CONFIG_TI816X_EVM_H
+#define __CONFIG_TI816X_EVM_H
+
+#define CONFIG_TI81XX
+#define CONFIG_TI816X
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_OMAP
+
+#define CONFIG_ARCH_CPU_INIT
+
+#include <asm/arch/omap.h>
+
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (32 * 1024))
+#define CONFIG_SYS_LONGHELP		/* undef save memory */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT		"u-boot/ti816x# "
+#define CONFIG_MACH_TYPE		MACH_TYPE_TI8168EVM
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG		/* required for ramdisk support */
+
+#include <config_cmd_default.h>		/* u-boot default commands */
+
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_BOOTDELAY		3 /* set negative for no autoboot */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"verify=yes\0"
+
+#define CONFIG_BOOTCOMMAND			\
+	"mmc rescan 0;"				\
+	"fatload mmc 0 0x81000000 uImage;"	\
+	"bootm 0x81000000"
+
+#define CONFIG_BOOTARGS	"console=ttyO2,115200n8 noinitrd earlyprintk"
+
+/* Clock Defines */
+#define V_OSCK          24000000    /* Clock output from T2 */
+#define V_SCLK          (V_OSCK >> 1)
+
+#define CONFIG_SYS_MAXARGS	32
+#define CONFIG_SYS_CBSIZE	512 /* console I/O buffer size */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
+		+ sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* boot arg buffer size */
+
+/*
+ * Memtest works on 8 MB in DRAM after skipping 32MB
+ * from start addr of ram disk
+ */
+#define CONFIG_SYS_MEMTEST_START	(PHYS_DRAM_1 + (64*1024*1024))
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START \
+		+ (8*1024*1024))
+
+#undef  CONFIG_SYS_CLKS_IN_HZ
+#define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
+#define CONFIG_SYS_HZ			1000	   /* 1ms clock */
+
+#define CONFIG_CMD_ASKEN
+#define CONFIG_CMD_ECHO
+#define CONFIG_OMAP_GPIO
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+
+#define CONFIG_FS_FAT
+
+/*
+ * Only one of the following two options (DDR3/DDR2) should be enabled
+ * CONFIG_TI816X_EVM_DDR2
+ * CONFIG_TI816X_EVM_DDR3
+ */
+#define CONFIG_TI816X_EVM_DDR3
+
+/*
+ * Supported values: 400, 531, 675 or 796 MHz
+ */
+#define CONFIG_TI816X_DDR_PLL_796
+
+#define CONFIG_TI816X_USE_EMIF0	1
+#define CONFIG_TI816X_USE_EMIF1	1
+
+
+#define CONFIG_NR_DRAM_BANKS	2		/* we have 2 banks of DRAM */
+#define PHYS_DRAM_1		0x80000000	/* DRAM Bank #1 */
+#define PHYS_DRAM_1_SIZE        0x40000000	/* 1 GB */
+#define PHYS_DRAM_2		0xC0000000	/* DRAM Bank #2 */
+#define PHYS_DRAM_2_SIZE	0x40000000	/* 1 GB */
+
+#define CONFIG_MAX_RAM_BANK_SIZE	(2048 << 20)	/* 2048MB */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_DRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR		(NON_SECURE_SRAM_END - \
+		GENERATED_GBL_DATA_SIZE)
+
+/**
+ * Platform/Board specific defs
+ */
+#define CONFIG_SYS_CLK_FREQ     27000000
+#define CONFIG_SYS_TIMERBASE    0x4802E000
+#define CONFIG_SYS_PTV          2   /* Divisor: 2^(PTV+1) => 8 */
+
+#undef CONFIG_NAND_OMAP_GPMC
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK      (48000000)
+#define CONFIG_SYS_NS16550_COM1     0x48024000  /* Base EVM has UART2 */
+
+#define CONFIG_BAUDRATE     115200
+
+/* allow overwriting serial config and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_SERIAL1
+#define CONFIG_SERIAL2
+#define CONFIG_SERIAL3
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+#define CONFIG_ENV_IS_NOWHERE
+
+/* SPL */
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE    0x40400000
+#define CONFIG_SPL_MAX_SIZE     ((128 - 18) * 1024)
+#define CONFIG_SPL_STACK        CONFIG_SYS_INIT_SP_ADDR
+
+#define CONFIG_SPL_BSS_START_ADDR   0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE     0x80000     /* 512 KB */
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_YMODEM_SUPPORT
+#define CONFIG_SYS_SPI_U_BOOT_OFFS  0x20000
+#define CONFIG_SYS_SPI_U_BOOT_SIZE  0x40000
+#define CONFIG_SPL_LDSCRIPT     "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+#define CONFIG_SPL_BOARD_INIT
+
+#define CONFIG_SYS_TEXT_BASE        0x80800000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE  0x100000
+
+/* Since SPL did pll and ddr initialization for us,
+ * we don't need to do it twice.
+ */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+/* Unsupported features */
+#undef CONFIG_USE_IRQ
+
+#endif
-- 
1.7.10.4


More information about the U-Boot mailing list