[U-Boot] [PATCH] usb: ehci-marvell: use structs for registers

[Sascha Silbe]

Use structs instead of computing offsets for accessing individual
registers. The base address of the USB controller is still an offset
defined in SoC headers as it can differ between SoCs.

Signed-off-by: Sascha Silbe <t-uboot at infra-silbe.de>
---
Tested on CuBox Pro only.

 drivers/usb/host/ehci-marvell.c | 48 +++++++++++++++++++++++++++++------------
 1 file changed, 34 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/host/ehci-marvell.c b/drivers/usb/host/ehci-marvell.c
index 2b73e4a..e4d6881 100644
--- a/drivers/usb/host/ehci-marvell.c
+++ b/drivers/usb/host/ehci-marvell.c
@@ -36,17 +36,35 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define rdl(off)	readl(MVUSB0_BASE + (off))
-#define wrl(off, val)	writel((val), MVUSB0_BASE + (off))
-
-#define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
-#define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
 #define USB_TARGET_DRAM		0x0
 
+/* USB 2.0 Bridge Address Decoding registers */
+struct mvusb_bad_window_regs {
+	u32 control;
+	u32 base;
+	u32 reserved[2];
+};
+
+struct mvusb_bridge_regs {
+	u32 bridge_control;
+	u32 reserved1[3];
+	u32 int_cause; /* Bridge Interrupt Cause Register */
+	u32 int_mask; /* Bridge Interrupt Mask Register */
+	u32 reserved2;
+	u32 error_addr; /* Bridge Error Address Register */
+	struct mvusb_bad_window_regs window[4];
+};
+
+struct mvusb_regs {
+	u32 unused1[0x40];
+	u32 ehci_regs[0x80];
+	struct mvusb_bridge_regs bridge;
+};
+
 /*
  * USB 2.0 Bridge Address Decoding registers setup
  */
-static void usb_brg_adrdec_setup(void)
+static void usb_brg_adrdec_setup(struct mvusb_regs *usb_base)
 {
 	int i;
 	u32 size, base, attrib;
@@ -75,14 +93,15 @@ static void usb_brg_adrdec_setup(void)
 
 		size = gd->bd->bi_dram[i].size;
 		base = gd->bd->bi_dram[i].start;
-		if ((size) && (attrib))
-			wrl(USB_WINDOW_CTRL(i),
-				MVCPU_WIN_CTRL_DATA(size, USB_TARGET_DRAM,
-					attrib, MVCPU_WIN_ENABLE));
+		if (size && attrib)
+			writel(MVCPU_WIN_CTRL_DATA(size, USB_TARGET_DRAM,
+						   attrib, MVCPU_WIN_ENABLE),
+			       usb_base->bridge.window[i].control);
 		else
-			wrl(USB_WINDOW_CTRL(i), MVCPU_WIN_DISABLE);
+			writel(MVCPU_WIN_DISABLE,
+			       usb_base->bridge.window[i].control);
 
-		wrl(USB_WINDOW_BASE(i), base);
+		writel(base, usb_base->bridge.window[i].base);
 	}
 }
 
@@ -92,9 +111,10 @@ static void usb_brg_adrdec_setup(void)
  */
 int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
-	usb_brg_adrdec_setup();
+	struct mvusb_regs *usb_base = (struct mvusb_regs *)MVUSB0_BASE;
 
-	*hccr = (struct ehci_hccr *)(MVUSB0_BASE + 0x100);
+	usb_brg_adrdec_setup(usb_base);
+	*hccr = (struct ehci_hccr *)(&usb_base->ehci_regs);
 	*hcor = (struct ehci_hcor *)((uint32_t) *hccr
 			+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
 
-- 
1.8.2.1