[U-Boot] [PATCH v3 3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function

[Marek Vasut]

Dear Stephen Warren,

> On 06/17/2013 03:09 AM, Jim Lin wrote:
> > Add USB EHCI, storage and network support.
> > 
> > Tested on Tegra30 Cardhu, and Tegra114 Dalmore
> > platforms. All works well.
> > 
> > diff --git a/include/configs/beaver.h b/include/configs/beaver.h
> > 
> > +/* USB Host support */
> 
> I notice that some Tegra20 boards include the following line here:
> 
> #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
> 
> Is this necessary here too?
> 
> If it doesn't serve any purpose, can you send an extra patch to remove
> this from seaboard.h, harmony.h, trimslice.h, and colibtri_t20_iris.h.
> Thanks.

The default value is 1, if you have multiple EHCI controllers on the board/chip, 
you want to configure this accordingly.

Best regards,
Marek Vasut