[U-Boot] [PATCH 3/3] mx6qsabre{sd,auto}: Add boot mode select

[Otavio Salvador]

Adds support for 'bmode' command which let user to choose where to
boot from; this allows U-Boot to load system from another storage
without messing with jumpers.

Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
---
 board/freescale/mx6qsabreauto/mx6qsabreauto.c | 17 +++++++++++++++++
 board/freescale/mx6qsabresd/mx6qsabresd.c     | 20 ++++++++++++++++++++
 include/configs/mx6qsabre_common.h            |  4 +++-
 3 files changed, 40 insertions(+), 1 deletion(-)

diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index 9e3700e..9650563 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -216,6 +216,23 @@ int board_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+	{NULL,   0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
+
+	return 0;
+}
+
 int checkboard(void)
 {
 	int rev = mx6sabre_rev();
diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c
index c334403..9ff6a06 100644
--- a/board/freescale/mx6qsabresd/mx6qsabresd.c
+++ b/board/freescale/mx6qsabresd/mx6qsabresd.c
@@ -265,6 +265,26 @@ int board_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"sd2",	 MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+	{"sd3",	 MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+	/* 8 bit bus width */
+	{"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
+	{NULL,	 0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
+
+	return 0;
+}
+
 int checkboard(void)
 {
 	puts("Board: MX6Q-SabreSD\n");
diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
index f7e8779..805707c 100644
--- a/include/configs/mx6qsabre_common.h
+++ b/include/configs/mx6qsabre_common.h
@@ -33,6 +33,7 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
@@ -72,10 +73,11 @@
 /* Command definition */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_BMODE
 #define CONFIG_CMD_BOOTZ
 #undef CONFIG_CMD_IMLS
 
-#define CONFIG_BOOTDELAY               1
+#define CONFIG_BOOTDELAY               10
 
 #define CONFIG_LOADADDR                        0x12000000
 #define CONFIG_SYS_TEXT_BASE           0x17800000
-- 
1.8.1