[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

[marcio at netopen.com.br]

Hi Bo Shen 

I have used a SAMBA old version and I managed to write
the Linux Kernel that can be recognized by U-boot but now it sends a
message "Veritying Checksum ....: Bad Data CRC. It seems that U-Boot is
only reading the first sector OK and the rest of the Kernel is being
worngly read. 

Thanks for your attention 

Marcio 

On Wed, 13 Mar 2013
18:32:30 -0700 (PDT), Bo Shen-3 [via U-Boot] wrote: 

> Hello, 
> 
> On
3/13/2013 20:26, [hidden email] wrote: 
>> Hi 
>> 
>> Our board reboots
after send Wrong Image Format message to the console and 
>> hangs. 
>

> How do you do this? what output from console? 
> 
>> The Linux uImage
is correctly placed in the NAND 0X200000. The 
>> console input is
somehow inhibit. I cannot type anything on it until the 
>> board
reboots . 
> 
> You mean, you can not interactive with u-boot, am I
right? 
> 
>> The board is an AT91SAM9M10 custom board based on the
AT91SAM9M10G45-ek 
>> development kit. 
>> It has only USB,
Serial(DBGU), DDR2 and NAND. 
>> I have tried to remove the LCD code but
the linker says that printk is 
>> missing. 
> 
> Please remove LCD
related #defined in board configuration header, while 
> not remove the
code. 
> 
> What the detail message for "printk is missing." 
> 
> BTW,
Which version u-boot do you use? 
> 
> Best Regards, 
> Bo Shen 
>
_______________________________________________ 
> U-Boot mailing list

> [hidden email] 
> http://lists.denx.de/mailman/listinfo/u-boot [1]
>

> -------------------------
> 
> If you reply to this email, your
message will be added to the discussion below:
http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149669.html
[2] 
> To unsubscribe from AT91SAM9M10 Custom Board U-boot reboot after
Wrong Image Format, click here [3].
> NAML [4]

  

Links:
------
[1]
http://lists.denx.de/mailman/listinfo/u-boot
[2]
http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149669.html
[3]
http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code|+|amp|+|node=149567|+|amp|+|code=bWFyY2lvQG5ldG9wZW4uY29tLmJyfDE0OTU2N3wxMDMwNzQyMzcx
[4]
http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=macro_viewer|+|amp|+|id=instant_html%21nabble%3Aemail.naml|+|amp|+|base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace|+|amp|+|breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml




--
View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149699.html
Sent from the U-Boot mailing list archive at Nabble.com.