[U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
sbabic at denx.de
Fri Mar 15 14:54:06 CET 2013
Hi Albert,
here an update pull request after applying Fabio's fixes.
The following changes since commit 4cfc611b4a4ce009cfad46804bec2a1caad8e329:
ARM: ns9750dev: remove remainders of dead board (2013-02-28 14:49:24
+0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 19a0f7fa271de0345bb2df90d443c547c41e8037:
nitrogen: Use unsigned long to specify the total RAM size (2013-03-15
14:39:44 +0100)
----------------------------------------------------------------
Benoît Thébaudeau (6):
imx: mx6q DDR3 init: Fix tMRD
imx: mx6q DDR3 init: Fix tXPR
imx: mx6q DDR3 init: Fix SDE_to_RST
imx: mx6q DDR3 init: Fix RST_to_CKE
imx: mx6q DDR3 init: Fix MR0.PPD
imx: mx6q DDR3 init: Benefit from available CL = 7
Eric Nelson (8):
i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST
i.MX6: mx6qsabrelite: indent with tabs
i.MX6: consolidate pad names for multi-CPU boards
i.MX6: crm_regs: define CCM_CCGRx for use in board config files
i.MX6: crm_regs: define IOMUXC_GPR4/6/7
i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIO
i.MX6: Add DDR controller registers
Add Boundary Devices Nitrogen6X boards
Fabio Estevam (6):
mx6: Disable Power Down Bit of watchdog
mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
mx23evk: Turn on caches
common: cmd_sata: Fix usage text for 'sata init'
mx6: Provide a structure for accessing HDMI registers
nitrogen6x: Fix RAM size variable
Fadil Berisha (2):
mxs: timrot: Add support to i.MX23
mxs: timrot: Rename local macros
Marek Vasut (7):
mxs: Reset the EMI block on mx23
mxs: mmc: spi: dma: Better wrap the MXS differences
mxs: spi: Fix the MXS SPI for mx23
mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLE
mxs: Squash the header file usage in ehci-mxs
mxs: Make ehci-mxs multiport capable
mxs: m28: Enable power to USB port 0
Otavio Salvador (11):
build: imx: Fix 'u-boot.imx' build without full OBJTREE reference
mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to
CONFIG_SPL_MXS_PSWITCH_WAIT
mx23: Document the tRAS lockout setting in memory initialization
mx23evk: Adjust DRAM control register to use full 128MB of RAM
led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set
mxs: Fix iomux.h to not break build during assembly stage
mx23_olinuxino: Add support for status LED
mx23evk: Enable USB support
mx23_olinuxino: Enable USB support
mx23_olinuxino: Add ethernet support
mx23_olinuxino: Fix warning for implicit declaration
Stefano Babic (3):
Merge branch 'master' of git://git.denx.de/u-boot-arm
Merge branch 'master' of git://git.denx.de/u-boot-arm
USB: drop unneeded header in ehci-mx6
Stephen Warren (1):
ARM: mx6: use common CPU errata config options
fabio.estevam at freescale.com (1):
nitrogen: Use unsigned long to specify the total RAM size
MAINTAINERS | 8 +
Makefile | 4 +-
arch/arm/cpu/arm926ejs/config.mk | 2 +-
arch/arm/cpu/arm926ejs/mxs/clock.c | 3 +-
arch/arm/cpu/arm926ejs/mxs/mxs_init.h | 2 +-
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 16 +-
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 2 +-
arch/arm/cpu/arm926ejs/mxs/timer.c | 39 +-
arch/arm/cpu/armv7/Makefile | 2 +-
arch/arm/cpu/armv7/config.mk | 2 +-
arch/arm/cpu/armv7/mx6/Makefile | 1 -
arch/arm/cpu/armv7/mx6/lowlevel_init.S | 35 -
arch/arm/cpu/armv7/mx6/soc.c | 16 +
arch/arm/include/asm/arch-mx6/crm_regs.h | 12 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 8 +
arch/arm/include/asm/arch-mx6/iomux.h | 5 +
arch/arm/include/asm/arch-mx6/mx6-ddr.h | 85 +
arch/arm/include/asm/arch-mx6/mx6-pins.h | 31 +
arch/arm/include/asm/arch-mx6/mx6dl-ddr.h | 71 +
arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 193 +--
arch/arm/include/asm/arch-mx6/mx6q-ddr.h | 69 +
arch/arm/include/asm/arch-mx6/mx6q_pins.h | 1671
++++++++++++++++++++
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 1671
--------------------
arch/arm/include/asm/arch-mx6/mxc_hdmi.h | 1083 ++++++-------
arch/arm/include/asm/arch-mxs/dma.h | 19 +-
arch/arm/include/asm/arch-mxs/imx-regs.h | 2 +
arch/arm/include/asm/arch-mxs/iomux.h | 5 +
arch/arm/include/asm/arch-mxs/regs-ssp.h | 26 +
arch/arm/include/asm/arch-mxs/regs-timrot.h | 101 ++
board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg | 58 +
board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg | 58 +
board/boundary/nitrogen6x/6x_bootscript.txt | 63 +
.../boundary/nitrogen6x/6x_bootscript_android.txt | 64 +
.../nitrogen6x/6x_bootscript_android_recovery.txt | 64 +
board/boundary/nitrogen6x/6x_upgrade.txt | 45 +
board/boundary/nitrogen6x/800mhz_2x128mx16.cfg | 58 +
board/boundary/nitrogen6x/800mhz_2x256mx16.cfg | 58 +
board/boundary/nitrogen6x/800mhz_4x128mx16.cfg | 57 +
board/boundary/nitrogen6x/800mhz_4x256mx16.cfg | 58 +
board/boundary/nitrogen6x/Makefile | 41 +
board/boundary/nitrogen6x/README | 92 ++
board/boundary/nitrogen6x/clocks.cfg | 46 +
board/boundary/nitrogen6x/ddr-setup.cfg | 112 ++
board/boundary/nitrogen6x/nitrogen6dl.cfg | 45 +
board/boundary/nitrogen6x/nitrogen6dl2g.cfg | 45 +
board/boundary/nitrogen6x/nitrogen6q.cfg | 45 +
board/boundary/nitrogen6x/nitrogen6q2g.cfg | 45 +
board/boundary/nitrogen6x/nitrogen6s.cfg | 45 +
board/boundary/nitrogen6x/nitrogen6s1g.cfg | 45 +
board/boundary/nitrogen6x/nitrogen6x.c | 895 +++++++++++
board/denx/m28evk/m28evk.c | 4 +
board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 10 +-
board/freescale/mx23evk/spl_boot.c | 10 +
board/freescale/mx6qarm2/mx6qarm2.c | 78 +-
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 60 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 292 ++--
board/freescale/mx6qsabresd/mx6qsabresd.c | 102 +-
board/olimex/mx23_olinuxino/mx23_olinuxino.c | 13 +
board/olimex/mx23_olinuxino/spl_boot.c | 8 +
boards.cfg | 6 +
common/cmd_led.c | 6 +-
common/cmd_sata.c | 2 +-
drivers/mmc/mxsmmc.c | 20 +-
drivers/spi/mxs_spi.c | 39 +-
drivers/usb/host/ehci-mx6.c | 1 -
drivers/usb/host/ehci-mxs.c | 155 +-
include/configs/apx4devkit.h | 3 +-
include/configs/m28evk.h | 5 +-
include/configs/mx23_olinuxino.h | 64 +-
include/configs/mx23evk.h | 14 +-
include/configs/mx28evk.h | 4 +-
include/configs/mx6_common.h | 23 +
include/configs/mx6qarm2.h | 3 +
include/configs/mx6qsabre_common.h | 4 +
include/configs/mx6qsabrelite.h | 4 +
include/configs/nitrogen6x.h | 285 ++++
include/configs/sc_sps_1.h | 3 +-
77 files changed, 5683 insertions(+), 2758 deletions(-)
delete mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
create mode 100644 arch/arm/include/asm/arch-mx6/mx6-ddr.h
create mode 100644 arch/arm/include/asm/arch-mx6/mx6-pins.h
create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl-ddr.h
create mode 100644 arch/arm/include/asm/arch-mx6/mx6q-ddr.h
create mode 100644 arch/arm/include/asm/arch-mx6/mx6q_pins.h
delete mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
create mode 100644 board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg
create mode 100644 board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg
create mode 100644 board/boundary/nitrogen6x/6x_bootscript.txt
create mode 100644 board/boundary/nitrogen6x/6x_bootscript_android.txt
create mode 100644
board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt
create mode 100644 board/boundary/nitrogen6x/6x_upgrade.txt
create mode 100644 board/boundary/nitrogen6x/800mhz_2x128mx16.cfg
create mode 100644 board/boundary/nitrogen6x/800mhz_2x256mx16.cfg
create mode 100644 board/boundary/nitrogen6x/800mhz_4x128mx16.cfg
create mode 100644 board/boundary/nitrogen6x/800mhz_4x256mx16.cfg
create mode 100644 board/boundary/nitrogen6x/Makefile
create mode 100644 board/boundary/nitrogen6x/README
create mode 100644 board/boundary/nitrogen6x/clocks.cfg
create mode 100644 board/boundary/nitrogen6x/ddr-setup.cfg
create mode 100644 board/boundary/nitrogen6x/nitrogen6dl.cfg
create mode 100644 board/boundary/nitrogen6x/nitrogen6dl2g.cfg
create mode 100644 board/boundary/nitrogen6x/nitrogen6q.cfg
create mode 100644 board/boundary/nitrogen6x/nitrogen6q2g.cfg
create mode 100644 board/boundary/nitrogen6x/nitrogen6s.cfg
create mode 100644 board/boundary/nitrogen6x/nitrogen6s1g.cfg
create mode 100644 board/boundary/nitrogen6x/nitrogen6x.c
create mode 100644 include/configs/mx6_common.h
create mode 100644 include/configs/nitrogen6x.h
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list