[U-Boot] 9g45 don't work

[xiexiaochao]

  hello,   my board base on  9m10g45, but mine don't work.   version ----  2013 lastest .  Would you please tell me why??   I will appreciate your reply.   
 
  message below:

-- AT91bootstrap Project 3.0 --
-- AT91SAM9G45-EK
-- Compiled: Mar  5 2013 18:10:43 --
-I- Setting: MCK = 133MHz
-I- Init DDRAM
-I- Init NAND Flash
-I- Nandflash ID is 0x9500F1EC
-I- Nandflash driver initialized
-I- Size of the whole device in bytes : 0x8000000
-I- Size in bytes of one single block of a device : 0x20000
-I- Number of blocks in the entire device : 0x400
-I- Size of the data area of a page in bytes : 0x800
-I- Number of pages in the entire device : 0x40
-I- Bus width : 8
-I- Copy "" (196608 bytes) from NAND 0x00020000 to 0x73f00000
-I- Jump to 0x73f00000

            CPU   die  there !!
 
 Best regards
Terry.Xie