[U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command

[Javier Martinez Canillas]

since commit "c1173bd0: sf command: allow default bus and chip selects"
the chip-select and bus arguments for the sf probe command are optional.

Even when passing the chip-select to sf probe says to be optional, it
makes "sf erase" and "sf write" to fail on a mx6qsabrelite board. e.g:

MX6QSABRELITE U-Boot > sf probe 1
MX6QSABRELITE U-Boot > sf erase 0 0x40000
SPI flash erase failed
MX6QSABRELITE U-Boot > sf write 0x10800000 0 0x40000
SPI flash write failed

But just using "sf probe" works well. So, update the mx6qsabrelite
README so the commands will work on current U-Boot.

Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
---
 board/freescale/mx6qsabrelite/README |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/board/freescale/mx6qsabrelite/README b/board/freescale/mx6qsabrelite/README
index 6f2f534..324b116 100644
--- a/board/freescale/mx6qsabrelite/README
+++ b/board/freescale/mx6qsabrelite/README
@@ -40,7 +40,7 @@ enter the following commands:
 
  MX6Q SABRELITE U-Boot > mmc dev 0
  MX6Q SABRELITE U-Boot > mmc read 0x10800000 0 200
- MX6Q SABRELITE U-Boot > sf probe 1
+ MX6Q SABRELITE U-Boot > sf probe
  MX6Q SABRELITE U-Boot > sf erase 0 0x40000
  MX6Q SABRELITE U-Boot > sf write 0x10800000 0 0x40000
 
-- 
1.7.7.6