[U-Boot] [Patch v2, batch 4 19/29] powerpc/t4240qds: fix PHY reset timeout issue

York Sun yorksun at freescale.com
Mon Mar 25 18:40:15 CET 2013


From: Shengzhou Liu <Shengzhou.Liu at freescale.com>

QSGMII card has different PHY address against previous SGMII card.
We check the type of card in slots and set correct PHY address to
avoid complainning "PHY reset timed out" during u-boot booting up.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
---
 board/freescale/t4qds/eth.c |   19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c
index b649df0..7103a0d 100644
--- a/board/freescale/t4qds/eth.c
+++ b/board/freescale/t4qds/eth.c
@@ -365,24 +365,40 @@ static void initialize_qsgmiiphy_fix(void)
 			qsgmiiphy_fix[FM1_DTSEC6] = 1;
 			qsgmiiphy_fix[FM1_DTSEC9] = 1;
 			qsgmiiphy_fix[FM1_DTSEC10] = 1;
+			slot_qsgmii_phyaddr[1][0] =  SGMII_CARD_PORT1_PHY_ADDR;
+			slot_qsgmii_phyaddr[1][1] =  SGMII_CARD_PORT2_PHY_ADDR;
+			slot_qsgmii_phyaddr[1][2] =  SGMII_CARD_PORT3_PHY_ADDR;
+			slot_qsgmii_phyaddr[1][3] =  SGMII_CARD_PORT4_PHY_ADDR;
 			break;
 		case 2:
 			qsgmiiphy_fix[FM1_DTSEC1] = 1;
 			qsgmiiphy_fix[FM1_DTSEC2] = 1;
 			qsgmiiphy_fix[FM1_DTSEC3] = 1;
 			qsgmiiphy_fix[FM1_DTSEC4] = 1;
+			slot_qsgmii_phyaddr[2][0] =  SGMII_CARD_PORT1_PHY_ADDR;
+			slot_qsgmii_phyaddr[2][1] =  SGMII_CARD_PORT2_PHY_ADDR;
+			slot_qsgmii_phyaddr[2][2] =  SGMII_CARD_PORT3_PHY_ADDR;
+			slot_qsgmii_phyaddr[2][3] =  SGMII_CARD_PORT4_PHY_ADDR;
 			break;
 		case 3:
 			qsgmiiphy_fix[FM2_DTSEC5] = 1;
 			qsgmiiphy_fix[FM2_DTSEC6] = 1;
 			qsgmiiphy_fix[FM2_DTSEC9] = 1;
 			qsgmiiphy_fix[FM2_DTSEC10] = 1;
+			slot_qsgmii_phyaddr[3][0] =  SGMII_CARD_PORT1_PHY_ADDR;
+			slot_qsgmii_phyaddr[3][1] =  SGMII_CARD_PORT2_PHY_ADDR;
+			slot_qsgmii_phyaddr[3][2] =  SGMII_CARD_PORT3_PHY_ADDR;
+			slot_qsgmii_phyaddr[3][3] =  SGMII_CARD_PORT4_PHY_ADDR;
 			break;
 		case 4:
 			qsgmiiphy_fix[FM2_DTSEC1] = 1;
 			qsgmiiphy_fix[FM2_DTSEC2] = 1;
 			qsgmiiphy_fix[FM2_DTSEC3] = 1;
 			qsgmiiphy_fix[FM2_DTSEC4] = 1;
+			slot_qsgmii_phyaddr[4][0] =  SGMII_CARD_PORT1_PHY_ADDR;
+			slot_qsgmii_phyaddr[4][1] =  SGMII_CARD_PORT2_PHY_ADDR;
+			slot_qsgmii_phyaddr[4][2] =  SGMII_CARD_PORT3_PHY_ADDR;
+			slot_qsgmii_phyaddr[4][3] =  SGMII_CARD_PORT4_PHY_ADDR;
 			break;
 		default:
 			break;
@@ -435,6 +451,7 @@ int board_eth_init(bd_t *bis)
 	t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
 	t4240qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
 
+	initialize_qsgmiiphy_fix();
 
 	switch (srds_prtcl_s1) {
 	case 1:
@@ -702,8 +719,6 @@ int board_eth_init(bd_t *bis)
 	}
 #endif /* CONFIG_SYS_NUM_FMAN */
 
-	initialize_qsgmiiphy_fix();
-
 	cpu_eth_init(bis);
 #endif /* CONFIG_FMAN_ENET */
 
-- 
1.7.9.5




More information about the U-Boot mailing list