[U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting

Pantelis Antoniou panto at antoniou-consulting.com
Fri Nov 1 08:45:49 CET 2013


Hi Zhang,

I'll take a look at it over the weekend.

Regards

-- Pantelis

On Nov 1, 2013, at 9:44 AM, Zhang Haijun wrote:

> 
> Hi,  Antonious
> 
> How about this patch?
> Could you give some advice?
> 
> 于 2013/10/21 17:23, Zhang Haijun 写道:
>> Hi, Babic
>> 
>> Thanks.
>> 
>> This patch is test on PPC.
>> 
>> 
>> Regards,
>> Haijun
>> 
>> 
>> 于 2013/10/21 17:19, Stefano Babic 写道:
>>> Hi,
>>> 
>>> On 21/10/2013 10:23, Zhang Haijun wrote:
>>>> Hi, all
>>>> 
>>>> Who can give some comments?
>>> I put Antonius in CC, he's the MMC custodian.
>>> 
>>> 
>>> The driver is for both PPC and i.MX. On which platform do you test these
>>> changes ?
>>> 
>>> Best regards,
>>> Stefano Babic
>>> 
>>>> 
>>>> 于 2013/10/12 17:50, Haijun Zhang 写道:
>>>>> When Auto-CMD12 is used, the corresponding interrupt and error bit
>>>>> should be enabled and set to reflect auto cmd 12 error.
>>>>> Also add other command error detecting, like command index error,
>>>>> CRC error etc. Without this command error bit set system will hang
>>>>> due to the while loop.
>>>>> 
>>>>> Signed-off-by: Haijun Zhang <Haijun.Zhang at freescale.com>
>>>>> ---
>>>>>  drivers/mmc/fsl_esdhc.c | 10 +++++-----
>>>>>  include/fsl_esdhc.h     |  3 ++-
>>>>>  2 files changed, 7 insertions(+), 6 deletions(-)
>>>>> 
>>>>> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
>>>>> index dc1d002..5aa592b 100644
>>>>> --- a/drivers/mmc/fsl_esdhc.c
>>>>> +++ b/drivers/mmc/fsl_esdhc.c
>>>>> @@ -342,13 +342,13 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
>>>>>  #endif
>>>>>        /* Wait for the command to complete */
>>>>> -    while (!(esdhc_read32(&regs->irqstat) & (IRQSTAT_CC | IRQSTAT_CTOE)))
>>>>> +    while (!(esdhc_read32(&regs->irqstat) & (IRQSTAT_CC | CMD_ERR)))
>>>>>          ;
>>>>>        irqstat = esdhc_read32(&regs->irqstat);
>>>>>        /* Reset CMD and DATA portions on error */
>>>>> -    if (irqstat & (CMD_ERR | IRQSTAT_CTOE)) {
>>>>> +    if (irqstat & CMD_ERR) {
>>>>>          esdhc_write32(&regs->sysctl, esdhc_read32(&regs->sysctl) |
>>>>>                    SYSCTL_RSTC);
>>>>>          while (esdhc_read32(&regs->sysctl) & SYSCTL_RSTC)
>>>>> @@ -363,12 +363,12 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
>>>>>          }
>>>>>      }
>>>>>  -    if (irqstat & CMD_ERR)
>>>>> -        return COMM_ERR;
>>>>> -
>>>>>      if (irqstat & IRQSTAT_CTOE)
>>>>>          return TIMEOUT;
>>>>>  +    if (irqstat & CMD_ERR)
>>>>> +        return COMM_ERR;
>>>>> +
>>>>>      /* Workaround for ESDHC errata ENGcm03648 */
>>>>>      if (!data && (cmd->resp_type & MMC_RSP_BUSY)) {
>>>>>          int timeout = 2500;
>>>>> diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
>>>>> index 67d6057..37dbe27 100644
>>>>> --- a/include/fsl_esdhc.h
>>>>> +++ b/include/fsl_esdhc.h
>>>>> @@ -62,7 +62,8 @@
>>>>>  #define IRQSTAT_TC        (0x00000002)
>>>>>  #define IRQSTAT_CC        (0x00000001)
>>>>>  -#define CMD_ERR        (IRQSTAT_CIE | IRQSTAT_CEBE | IRQSTAT_CCE)
>>>>> +#define CMD_ERR        (IRQSTAT_CIE | IRQSTAT_CEBE | IRQSTAT_CCE | \
>>>>> +                IRQSTAT_CTOE | IRQSTAT_AC12E)
>>>>>  #define DATA_ERR    (IRQSTAT_DEBE | IRQSTAT_DCE | IRQSTAT_DTOE | \
>>>>>                  IRQSTAT_DMAE)
>>>>>  #define DATA_COMPLETE    (IRQSTAT_TC | IRQSTAT_DINT)
>>> 
>> 
> 
> -- 
> Thanks & Regards
> Haijun.
> 
> 



More information about the U-Boot mailing list