November 2013 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Fri Nov 1 00:11:55 CET 2013
Ending: Sat Nov 30 22:54:58 CET 2013
Messages: 2212

• [U-Boot] (no subject)   Bojan Buić
• [U-Boot] (no subject)   Stefano Babic
• [U-Boot] (no subject)   Bojan Buić
• [U-Boot] (no subject)   Bojan Buić
• [U-Boot] (no subject)   Stefano Babic
• [U-Boot] (no subject)   Bojan Buić
• [U-Boot] (no subject)   Bojan Buić
• [U-Boot] (no subject)   Wolfgang Denk
• [U-Boot] [[PATCH v2]pandaboard: 0/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Hardik
• [U-Boot] [[PATCH v2]pandaboard: 0/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Hardik
• [U-Boot] [[PATCH v2]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Hardik
• [U-Boot] [[PATCH v2]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Robert Nelson
• [U-Boot] [[PATCH v2]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Michael Trimarchi
• [U-Boot] [[PATCH v2]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Tom Rini
• [U-Boot] [[PATCH v2]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Michael Trimarchi
• [U-Boot] [[PATCH v2]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Tom Rini
• [U-Boot] [[PATCH v2]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Hardik Patel
• [U-Boot] [[PATCH v2]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Michael Trimarchi
• [U-Boot] [[PATCH v2]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Tom Rini
• [U-Boot] [[PATCH v2]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Nishanth Menon
• [U-Boot] [[PATCH v2]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Tom Rini
• [U-Boot] [[PATCH v2]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Nishanth Menon
• [U-Boot] [[PATCH v2]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   jmgrimaud
• [U-Boot] [[PATCH v3]pandaboard: 0/1] ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2 RAM   Hardik
• [U-Boot] [[PATCH v3]pandaboard: 1/1] ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2 RAM   Hardik
• [U-Boot] [ANN] v2014.01-rc1   Tom Rini
• [U-Boot] [ANN] v2014.01-rc1   Wolfgang Denk
• [U-Boot] [ANN] v2014.01-rc1   Masahiro Yamada
• [U-Boot] [ANN] v2014.01-rc1   Yan, Miao
• [U-Boot] [ANN] v2014.01-rc1   Tom Rini
• [U-Boot] [ANN] v2014.01-rc1   Tom Rini
• [U-Boot] [ANN] v2014.01-rc1   Yan, Miao
• [U-Boot] [CBP5850-EVB] relocate_code question   TigerLiu at viatech.com.cn
• [U-Boot] [FYI] Tech-Talk in Opensource India Conference, 2013   Jagan Teki
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
• [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [i2c] Pull request   Heiko Schocher
• [U-Boot] [i2c] Pull request   Tom Rini
• [U-Boot] [linux-sunxi] Re: [PATCH 0/9] ARMv7: add PSCI support to u-boot   Anup Patel
• [U-Boot] [linux-sunxi] Re: [PATCH 0/9] ARMv7: add PSCI support to u-boot   Anup Patel
• [U-Boot] [linux-sunxi] Re: [PATCH 0/9] ARMv7: add PSCI support to u-boot   Ian Campbell
• [U-Boot] [linux-sunxi] Re: [PATCH 0/9] ARMv7: add PSCI support to u-boot   Ian Campbell
• [U-Boot] [linux-sunxi] Re: [PATCH 0/9] ARMv7: add PSCI support to u-boot   Ian Campbell
• [U-Boot] [linux-sunxi] Re: [PATCH 0/9] ARMv7: add PSCI support to u-boot   Marc Zyngier
• [U-Boot] [linux-sunxi] Re: [PATCH 0/9] ARMv7: add PSCI support to u-boot   Christoffer Dall
• [U-Boot] [mips] malta configuration works in qemu-1.5 does not in qemu-1.6   Daniel Schwierzeck
• [U-Boot] [mips] malta configuration works in qemu-1.5 does not in qemu-1.6   Alon Bar-Lev
• [U-Boot] [mips] malta configuration works in qemu-1.5 does not in qemu-1.6   Alon Bar-Lev
• [U-Boot] [mips] malta configuration works in qemu-1.5 does not in qemu-1.6   Gabor Juhos
• [U-Boot] [mips] malta configuration works in qemu-1.5 does not in qemu-1.6   Paul Burton
• [U-Boot] [mips] malta configuration works in qemu-1.5 does not in qemu-1.6   Gabor Juhos
• [U-Boot] [NAND] fsl_elbc_nand and subpage access   Valentin Longchamp
• [U-Boot] [NAND] fsl_elbc_nand and subpage access   Scott Wood
• [U-Boot] [PATCH 0/2] Add usb eth support   Chander Kashyap
• [U-Boot] [PATCH 0/2] blackfin: Do not generate unused files   Masahiro Yamada
• [U-Boot] [PATCH 0/2] env export fixes   Pierre Aubert
• [U-Boot] [PATCH 0/2] i.MX6 (DQ/DLS): use macros for mux and pad declarations   Eric Nelson
• [U-Boot] [PATCH 0/2] i2c: fti2c010: migrate to new i2c model   Kuo-Jung Su
• [U-Boot] [PATCH 0/2] Make 10Mbit/s work with lan8720a   David Dueck
• [U-Boot] [PATCH 0/2] More trivial refactoring of makefiles   Masahiro Yamada
• [U-Boot] [PATCH 0/2] OMAP5/DRA7: EMIF fixes for lowpower usecases   Sricharan R
• [U-Boot] [PATCH 0/2] socfpga: Adding Scan Manager   Chin Liang See
• [U-Boot] [PATCH 0/32] Add additional sandbox features and infrastructure   Simon Glass
• [U-Boot] [PATCH 0/32] Add additional sandbox features and infrastructure   Simon Glass
• [U-Boot] [PATCH 0/3] Add support for CM-T335 board   Ilya Ledvich
• [U-Boot] [PATCH 0/3] Add support for CM-T335 board   Ilya Ledvich
• [U-Boot] [PATCH 0/3] gpio_led driver updates   Igor Grinberg
• [U-Boot] [PATCH 0/4] at91: remove legacy GPIO API (part 1)   Andreas Bießmann
• [U-Boot] [PATCH 0/4] MIPS Malta fixes   Paul Burton
• [U-Boot] [PATCH 0/4] MIPS Malta fixes   Daniel Schwierzeck
• [U-Boot] [PATCH 0/4] mx6: Add SPL Framewok   Edward Lin
• [U-Boot] [PATCH 0/4] mx6: Add SPL Framewok   Eric Nelson
• [U-Boot] [PATCH 0/4] Trats2 code cleanups   Piotr Wilczek
• [U-Boot] [PATCH 0/4] udoo: Improve stability of DDR3 setting   Giuseppe Pagano
• [U-Boot] [PATCH 0/4] udoo: Improve stability of DDR3 setting   Stefano Babic
• [U-Boot] [PATCH 0/4] udoo: Improve stability of DDR3 setting   Giuseppe Pagano
• [U-Boot] [PATCH 0/4] udoo: Improve stability of DDR3 setting   Stefano Babic
• [U-Boot] [PATCH 0/4] Wandboard support for Future Eletronics 7" WVGA LCD extension board   Stefano Babic
• [U-Boot] [PATCH 0/4] Wandboard support for Future Eletronics 7" WVGA LCD extension board   Otavio Salvador
• [U-Boot] [PATCH 0/5] i.MX6 (DQ/DLS): consolidate mux and pad names   Eric Nelson
• [U-Boot] [PATCH 0/5] i.MX6 (DQ/DLS): consolidate mux and pad names   Eric Nelson
• [U-Boot] [PATCH 0/6] adapt s3c24x0 driver to new i2c framework   Piotr Wilczek
• [U-Boot] [PATCH 0/9 V7] EXYNOS5420: Add SMDK5420 board support   Rajeshwari S Shinde
• [U-Boot] [PATCH 0/9 v8] EXYNOS5420: Add SMDK5420 board support   Rajeshwari S Shinde
• [U-Boot] [PATCH 0/9 v8] EXYNOS5420: Add SMDK5420 board support   Rajeshwari Birje
• [U-Boot] [PATCH 0/9 v8] EXYNOS5420: Add SMDK5420 board support   Minkyu Kang
• [U-Boot] [PATCH 0/9] ARMv7: add PSCI support to u-boot   Marc Zyngier
• [U-Boot] [PATCH 0/9] ARMv7: add PSCI support to u-boot   Rob Herring
• [U-Boot] [PATCH 0/9] ARMv7: add PSCI support to u-boot   Marc Zyngier
• [U-Boot] [PATCH 0/9] ARMv7: add PSCI support to u-boot   Christoffer Dall
• [U-Boot] [PATCH 0/9] ARMv7: add PSCI support to u-boot   Anup Patel
• [U-Boot] [PATCH 0/9] ARMv7: add PSCI support to u-boot   Marc Zyngier
• [U-Boot] [PATCH 0/9] ARMv7: add PSCI support to u-boot   Marc Zyngier
• [U-Boot] [PATCH 00/10 V6] EXYNOS5420: Add SMDK5420 board support   Rajeshwari Birje
• [U-Boot] [PATCH 00/10 V6] EXYNOS5420: Add SMDK5420 board support   Minkyu Kang
• [U-Boot] [PATCH 00/14] ARM: AM43xx: Update support for AM4372 SoC   Lokesh Vutla
• [U-Boot] [PATCH 00/15] MIPS Malta board support   Daniel Schwierzeck
• [U-Boot] [PATCH 00/18] Third step towards Kbuild: Convert rest of makefiles   Andreas Bießmann
• [U-Boot] [PATCH 00/18] Third step towards Kbuild: Convert rest of makefiles   Tom Rini
• [U-Boot] [PATCH 00/22] A collection of trivial Makefile refactoring   Masahiro Yamada
• [U-Boot] [PATCH 00/22] A collection of trivial Makefile refactoring   Tom Rini
• [U-Boot] [PATCH 00/34] zynq: More boards support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 01/10 V6] EXYNOS5: Create a common board file   Przemyslaw Marczak
• [U-Boot] [PATCH 01/10 V6] EXYNOS5: Create a common board file   Rajeshwari Birje
• [U-Boot] [PATCH 01/10 V6] EXYNOS5: Create a common board file   Przemyslaw Marczak
• [U-Boot] [PATCH 01/10 V6] EXYNOS5: Create a common board file   Rajeshwari Birje
• [U-Boot] [PATCH 01/10 V6] EXYNOS5: Create a common board file   Przemyslaw Marczak
• [U-Boot] [PATCH 01/10 V6] EXYNOS5: Create a common board file   Rajeshwari Birje
• [U-Boot] [PATCH 01/14] ARM: AM43xx: Update the base addresses of modules   Vaibhav Bedia
• [U-Boot] [PATCH 01/14] ARM: AM43xx: Update the base addresses of modules   Lokesh Vutla
• [U-Boot] [PATCH 01/14] ARM: AM43xx: Update the base addresses of modules   Lokesh Vutla
• [U-Boot] [PATCH 01/22] Makefile: abolish COBJS, SOBJS, etc.   Masahiro Yamada
• [U-Boot] [PATCH 01/32] Add crc8 routine   Simon Glass
• [U-Boot] [PATCH 01/34] zynq: Enable CONFIG_FIT_VERBOSE   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 02/10 V6] Exynos5420: Add base addresses for 5420   Minkyu Kang
• [U-Boot] [PATCH 02/14] ARM: AM43xx: Adapt to ti_armv7_common.h config file   Lokesh Vutla
• [U-Boot] [PATCH 02/14] ARM: AM43xx: Adapt to ti_armv7_common.h config file   Vaibhav Bedia
• [U-Boot] [PATCH 02/14] ARM: AM43xx: Adapt to ti_armv7_common.h config file   Lokesh Vutla
• [U-Boot] [PATCH 02/22] Makefile: specifiy an explicite object name rather than $(BOARD).o   Masahiro Yamada
• [U-Boot] [PATCH 02/32] sandbox: Use system headers first for sandbox's os.c   Simon Glass
• [U-Boot] [PATCH 02/34] zynq: Enable Boot FreeBSD/vxWorks   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 03/10 V6] Exynos5420: Add clock initialization for 5420   Minkyu Kang
• [U-Boot] [PATCH 03/10 V6] Exynos5420: Add clock initialization for 5420   Rajeshwari Birje
• [U-Boot] [PATCH 03/10 V6] Exynos5420: Add clock initialization for 5420   Minkyu Kang
• [U-Boot] [PATCH 03/14] ARM: AM43xx: Add L2 Support   Lokesh Vutla
• [U-Boot] [PATCH 03/22] drivers: descend into sub directories only when it is necessary   Masahiro Yamada
• [U-Boot] [PATCH 03/32] sandbox: Use uint64_t instead of u64 for time   Simon Glass
• [U-Boot] [PATCH 03/34] zynq: Cleanup on miscellaneous configs   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 03/34] zynq: Cleanup on miscellaneous configs   Tom Rini
• [U-Boot] [PATCH 03/34] zynq: Cleanup on miscellaneous configs   Michal Simek
• [U-Boot] [PATCH 04/10 V6] Exynos5420: Add DDR3 initialization for 5420   Minkyu Kang
• [U-Boot] [PATCH 04/14] ARM: AM43xx: Add extra ENV settings   Lokesh Vutla
• [U-Boot] [PATCH 04/22] lib: descend into sub directories only when it is necessary   Masahiro Yamada
• [U-Boot] [PATCH 04/32] sandbox: Increase memory size to 32MB   Simon Glass
• [U-Boot] [PATCH 04/34] zynq: Cleanup on memory configs   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 05/10 V6] Exynos5420: Add support for 5420 in pinmux and gpio   Minkyu Kang
• [U-Boot] [PATCH 05/10 V6] Exynos5420: Add support for 5420 in pinmux and gpio   Rajeshwari Birje
• [U-Boot] [PATCH 05/10 V6] Exynos5420: Add support for 5420 in pinmux and gpio   Rajeshwari Birje
• [U-Boot] [PATCH 05/10 V6] Exynos5420: Add support for 5420 in pinmux and gpio   Minkyu Kang
• [U-Boot] [PATCH 05/14] ARM: AM43XX: board: add support for reading onboard EEPROM   Lokesh Vutla
• [U-Boot] [PATCH 05/14] ARM: AM43XX: board: add support for reading onboard EEPROM   Vaibhav Bedia
• [U-Boot] [PATCH 05/14] ARM: AM43XX: board: add support for reading onboard EEPROM   Lokesh Vutla
• [U-Boot] [PATCH 05/14] ARM: AM43XX: board: add support for reading onboard EEPROM   Vaibhav Bedia
• [U-Boot] [PATCH 05/14] ARM: AM43XX: board: add support for reading onboard EEPROM   Tom Rini
• [U-Boot] [PATCH 05/14] ARM: AM43XX: board: add support for reading onboard EEPROM   Vaibhav Bedia
• [U-Boot] [PATCH 05/14] ARM: AM43XX: board: add support for reading onboard EEPROM   Tom Rini
• [U-Boot] [PATCH 05/14] ARM: AM43XX: board: add support for reading onboard EEPROM   Vaibhav Bedia
• [U-Boot] [PATCH 05/18] avr32: convert makefiles to Kbuild style   Andreas Bießmann
• [U-Boot] [PATCH 05/22] drivers: tpm: clean up unused code   Masahiro Yamada
• [U-Boot] [PATCH 05/32] sandbox: spi: Adjust 'sf test' to work on sandbox   Simon Glass
• [U-Boot] [PATCH 05/34] zynq: Minor config cleanup   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 06/10 V6] Exynos5420: Add base patch for SMDK5420   Minkyu Kang
• [U-Boot] [PATCH 06/14] ARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Lokesh Vutla
• [U-Boot] [PATCH 06/22] Makefile: make directories by Makefile.build   Masahiro Yamada
• [U-Boot] [PATCH 06/32] sandbox: Build a device tree file for sandbox   Simon Glass
• [U-Boot] [PATCH 06/34] zynq: Enable cache options   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 07/10 V6] DTS: Add dts support for SMDK5420   Minkyu Kang
• [U-Boot] [PATCH 07/10 V6] DTS: Add dts support for SMDK5420   Rajeshwari Birje
• [U-Boot] [PATCH 07/10 V6] DTS: Add dts support for SMDK5420   Minkyu Kang
• [U-Boot] [PATCH 07/10 V6] DTS: Add dts support for SMDK5420   Rajeshwari Birje
• [U-Boot] [PATCH 07/14] ARM: AM43xx: Select clk source for Timer2   Lokesh Vutla
• [U-Boot] [PATCH 07/14] ARM: AM43xx: Select clk source for Timer2   Vaibhav Bedia
• [U-Boot] [PATCH 07/14] ARM: AM43xx: Select clk source for Timer2   Lokesh Vutla
• [U-Boot] [PATCH 07/14] ARM: AM43xx: Select clk source for Timer2   Vaibhav Bedia
• [U-Boot] [PATCH 07/14] ARM: AM43xx: Select clk source for Timer2   Lokesh Vutla
• [U-Boot] [PATCH 07/22] Makefile: merge $(LIBBOARD) into $(LIBS)   Masahiro Yamada
• [U-Boot] [PATCH 07/32] sandbox: config: Don't use 64-bit physical memory   Simon Glass
• [U-Boot] [PATCH 07/34] zynq: Add UART0, UART1 configs support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 07/34] zynq: Add UART0, UART1 configs support   Dinh Nguyen
• [U-Boot] [PATCH 07/34] zynq: Add UART0, UART1 configs support   Dinh Nguyen
• [U-Boot] [PATCH 07/34] zynq: Add UART0, UART1 configs support   Michal Simek
• [U-Boot] [PATCH 07/34] zynq: Add UART0, UART1 configs support   Dinh Nguyen
• [U-Boot] [PATCH 07/34] zynq: Add UART0, UART1 configs support   Michal Simek
• [U-Boot] [PATCH 08/10 V6] Config: Add initial config for SMDK5420   Minkyu Kang
• [U-Boot] [PATCH 08/14] ARM: AM43xx: Update Current Booting devices list   Lokesh Vutla
• [U-Boot] [PATCH 08/22] powerpc: move mpc8xxx entry under arch/powerpc/cpu/   Masahiro Yamada
• [U-Boot] [PATCH 08/32] sandbox: Correct data sizes and printf() strings in fdtdec.c   Simon Glass
• [U-Boot] [PATCH 08/34] zynq: Add GEM0, GEM1 configs support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 09/14] ARM: AM43xx: mux: Update mux data   Lokesh Vutla
• [U-Boot] [PATCH 09/14] ARM: AM43xx: mux: Update mux data   Vaibhav Bedia
• [U-Boot] [PATCH 09/14] ARM: AM43xx: mux: Update mux data   Lokesh Vutla
• [U-Boot] [PATCH 09/14] ARM: AM43xx: mux: Update mux data   Vaibhav Bedia
• [U-Boot] [PATCH 09/14] ARM: AM43xx: mux: Update mux data   Lokesh Vutla
• [U-Boot] [PATCH 09/22] drivers/qe: move the entry to drivers/Makefile   Masahiro Yamada
• [U-Boot] [PATCH 09/32] sandbox: Use os functions to read host device tree   Simon Glass
• [U-Boot] [PATCH 09/34] zynq-common: Rename zynq with zynq-common   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 1/1] ARM: config: USB: Tegra30/114: Fix EHCI timeout issue on "bootp"   Jim Lin
• [U-Boot] [PATCH 1/1] ARM: config: USB: Tegra30/114: Fix EHCI timeout issue on "bootp"   Stephen Warren
• [U-Boot] [PATCH 1/1] imx6: fix random hang when download by mfgtools   Frank Li
• [U-Boot] [PATCH 1/1] imx6: fix random hang when download by usb   Frank Li
• [U-Boot] [PATCH 1/1] MX6 SabreSD: Use readl() to read the CCM_CCGR3 register   Liu Ying
• [U-Boot] [PATCH 1/1] MX6 SabreSD: Use readl() to read the CCM_CCGR3 register   Fabio Estevam
• [U-Boot] [PATCH 1/2 V2] powerpc/esdhc: Map register for eSDHC Host Controller V3.0   Pantelis Antoniou
• [U-Boot] [PATCH 1/2 V2] powerpc/esdhc: Map register for eSDHC Host Controller V3.0   Zhang Haijun
• [U-Boot] [PATCH 1/2 V2] powerpc/esdhc: Map register for eSDHC Host Controller V3.0   Jaehoon Chung
• [U-Boot] [PATCH 1/2 V2] powerpc/esdhc: Map register for eSDHC Host Controller V3.0   Zhang Haijun
• [U-Boot] [PATCH 1/2 V2] powerpc/esdhc: Map register for eSDHC Host Controller V3.0   Zhang Haijun
• [U-Boot] [PATCH 1/2 v3] arm: rmobile: Add support R8A7791   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2 v4] arm: rmobile: Add support R8A7790   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2 v4] arm: rmobile: Add support R8A7791   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2] ARM: at91: at91sam9x5: mmc: save environment as a FAT file (uboot.env)   Josh Wu
• [U-Boot] [PATCH 1/2] ARM: bcm2835: add missing mbox overscan response field   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] ARM: bcm2835: add missing mbox overscan response field   Stephen Warren
• [U-Boot] [PATCH 1/2] ARM: bcm2835: add missing mbox overscan response field   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] ARM: bcm2835: add missing mbox overscan response field   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] ARM: bcm2835: add missing mbox overscan response field   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] ARM: DRA: EMIF: Change DDR3 settings to use hw leveling   Sricharan R
• [U-Boot] [PATCH 1/2] ARM: DRA: EMIF: Change DDR3 settings to use hw leveling   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: DRA: EMIF: Change DDR3 settings to use hw leveling   Sricharan R
• [U-Boot] [PATCH 1/2] arm: kzm9g: Fix undefined reference to `__aeabi_uldivmod' error   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2] arm: kzm9g: Fix undefined reference to `__aeabi_uldivmod' error   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2] ARM: versatile: pass correct machine type for Versatile AB   Marek Vasut
• [U-Boot] [PATCH 1/2] ARM: versatile: pass correct machine type for Versatile AB   Marek Vasut
• [U-Boot] [PATCH 1/2] ARM: versatile: pass correct machine type for Versatile AB   Linus Walleij
• [U-Boot] [PATCH 1/2] ARM: versatile: pass correct machine type for Versatile AB   Linus Walleij
• [U-Boot] [PATCH 1/2] ARM: versatile: pass correct machine type for Versatile AB   Linus Walleij
• [U-Boot] [PATCH 1/2] ARM: versatile: pass correct machine type for Versatile AB   Stefano Babic
• [U-Boot] [PATCH 1/2] ARM: versatile: pass correct machine type for Versatile AB   Linus Walleij
• [U-Boot] [PATCH 1/2] blackfin: Do not generate unused header bootrom-asm-offsets.h   Masahiro Yamada
• [U-Boot] [PATCH 1/2] exynos5-dt: enable new CONFIG_SYS_I2C symbols   Heiko Schocher
• [U-Boot] [PATCH 1/2] exynos5-dt: enable new CONFIG_SYS_I2C symbols   Naveen Krishna Ch
• [U-Boot] [PATCH 1/2] exynos5-dt: enable new CONFIG_SYS_I2C symbols   Naveen Krishna Chatradhi
• [U-Boot] [PATCH 1/2] hashtable: fix the export lenght computation.   Wolfgang Denk
• [U-Boot] [PATCH 1/2] hashtable: fix the export lenght computation.   Pierre AUBERT
• [U-Boot] [PATCH 1/2] hashtable: fix the export lenght computation.   Pierre Aubert
• [U-Boot] [PATCH 1/2] i.MX6 (DQ/DLS): use macros for mux and pad declarations   Eric Nelson
• [U-Boot] [PATCH 1/2] i.MX6 (DQ/DLS): use macros for mux and pad declarations   Stefano Babic
• [U-Boot] [PATCH 1/2] i2c: fti2c010: cosmetic: coding style cleanup   Kuo-Jung Su
• [U-Boot] [PATCH 1/2] phy: Use supported field during autonegotiation   David Dueck
• [U-Boot] [PATCH 1/2] post: descend only when CONFIG_HAS_POST is defined   Masahiro Yamada
• [U-Boot] [PATCH 1/2] socfpga: Adding Scan Manager driver   Chin Liang See
• [U-Boot] [PATCH 1/2] spi: bfin_spi: Remove unnecessary test for bus and pins[bus]   Axel Lin
• [U-Boot] [PATCH 1/2] time: add weak annotation to timer_read_counter declaration   Rob Herring
• [U-Boot] [PATCH 1/2] time: add weak annotation to timer_read_counter declaration   Tom Rini
• [U-Boot] [PATCH 1/2] vexpress: use correct timer address on extended memory map systems   Ian Campbell
• [U-Boot] [PATCH 1/2] wandboard: Return the error immediately when ipuv3_fb_init() fails   Fabio Estevam
• [U-Boot] [PATCH 1/2] wandboard: Return the error immediately when ipuv3_fb_init() fails   Stefano Babic
• [U-Boot] [PATCH 1/2][v2] powerpc/t104xrdb: Add T1040RDB board support   york sun
• [U-Boot] [PATCH 1/2][v2] powerpc: mmc: Add corenet devices support in esdhc spl   Priyanka Jain
• [U-Boot] [PATCH 1/2][v2] powerpc: spiflash:Add corenet devices support in eSPI SPL   Priyanka Jain
• [U-Boot] [PATCH 1/3 v5] arm: rmobile: Move lowlevel_init.o to taget of each CPU   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/3] cm_t335: add cm_t335 board support   Ilya Ledvich
• [U-Boot] [PATCH 1/3] README: document the CONFIG_GPIO_LED symbol   Igor Grinberg
• [U-Boot] [PATCH 1/4 v2] blackfin: Use ADI_GPIO2 driver other than the default ADI_GPIO1   Sonic Zhang
• [U-Boot] [PATCH 1/4 v2] net/fman: Add support for 10GEC3 and 10GEC4   York Sun
• [U-Boot] [PATCH 1/4 v2] net/fman: Add support for 10GEC3 and 10GEC4   Shengzhou Liu
• [U-Boot] [PATCH 1/4] at91: add new gpio pin definitions   Andreas Bießmann
• [U-Boot] [PATCH 1/4] blackfin: i2c: Missing the patch to define GPIO I2C pins.   Sonic Zhang
• [U-Boot] [PATCH 1/4] blackfin: i2c: Missing the patch to define GPIO I2C pins.   Heiko Schocher
• [U-Boot] [PATCH 1/4] blackfin: i2c: Missing the patch to define GPIO I2C pins.   Sonic Zhang
• [U-Boot] [PATCH 1/4] board: trats2: remove unused defines from config file   Piotr Wilczek
• [U-Boot] [PATCH 1/4] drivers/rtc/davinci.c: Reference DAVINCI_RTC_BASE more directly   Tom Rini
• [U-Boot] [PATCH 1/4] mips: don't hardcode Malta env baudrate   Paul Burton
• [U-Boot] [PATCH 1/4] mx51evk: Fix pmic_init() argument   Fabio Estevam
• [U-Boot] [PATCH 1/4] mx51evk: Fix pmic_init() argument   Stefano Babic
• [U-Boot] [PATCH 1/4] mx51evk: Fix pmic_init() argument   Stefano Babic
• [U-Boot] [PATCH 1/4] mx6: add function to determine boot device   Edward Lin
• [U-Boot] [PATCH 1/4] mx6: add function to determine boot device   Eric Nelson
• [U-Boot] [PATCH 1/4] net/fman: Add support for 10GEC3 and 10GEC4   Shengzhou Liu
• [U-Boot] [PATCH 1/4] net/fman: Add support for 10GEC3 and 10GEC4   York Sun
• [U-Boot] [PATCH 1/4] net/fman: Add support for 10GEC3 and 10GEC4   Shengzhou Liu
• [U-Boot] [PATCH 1/4] SPI:rewrite the Freescale DSPI driver.   Chao Fu
• [U-Boot] [PATCH 1/4] SPI:rewrite the Freescale DSPI driver.   Stefano Babic
• [U-Boot] [PATCH 1/4] udoo: Add Ethernet support.   Giuseppe Pagano
• [U-Boot] [PATCH 1/4] udoo: Add Ethernet support.   Stefano Babic
• [U-Boot] [PATCH 1/4] udoo: Add Ethernet support.   Giuseppe Pagano
• [U-Boot] [PATCH 1/4] udoo: Add Ethernet support.   Stefano Babic
• [U-Boot] [PATCH 1/4] udoo: Add Ethernet support.   Stefano Babic
• [U-Boot] [PATCH 1/4] udoo: Add Ethernet support.   Joe Hershberger
• [U-Boot] [PATCH 1/5] ahci: Error out with message on malloc() failure   Roger Quadros
• [U-Boot] [PATCH 1/5] arm, omap3: Add support for TechNexion modules   Stefan Roese
• [U-Boot] [PATCH 1/5] ARM: armv7: Make indirect vector addresses globl   Marek Vasut
• [U-Boot] [PATCH 1/5] ARM: armv7: Make indirect vector addresses globl   Marek Vasut
• [U-Boot] [PATCH 1/5] ARM: armv7: Make indirect vector addresses globl   Stefano Babic
• [U-Boot] [PATCH 1/5] i.MX6DQ/DLS: replace pad names with their Linux kernel equivalents   Eric Nelson
• [U-Boot] [PATCH 1/5] i.MX6DQ/DLS: replace pad names with their Linux kernel equivalents   Fabio Estevam
• [U-Boot] [PATCH 1/5] mx6sabre{auto, sd}: Change FDT loading address to avoid overlaping   Otavio Salvador
• [U-Boot] [PATCH 1/5] mx6sabre{auto, sd}: Change FDT loading address to avoid overlaping   Fabio Estevam
• [U-Boot] [PATCH 1/5] mx6sabre{auto, sd}: Change FDT loading address to avoid overlaping   Otavio Salvador
• [U-Boot] [PATCH 1/5] mx6sabre{auto, sd}: Change FDT loading address to avoid overlaping   Fabio Estevam
• [U-Boot] [PATCH 1/5] mx6sabre{auto, sd}: Change FDT loading address to avoid overlaping   Otavio Salvador
• [U-Boot] [PATCH 1/5] mx6sabre{auto, sd}: Change FDT loading address to avoid overlaping   Stefano Babic
• [U-Boot] [PATCH 1/5] mx6sabre{auto, sd}: Change FDT loading address to avoid overlaping   Otavio Salvador
• [U-Boot] [PATCH 1/5] mx6sabre{auto, sd}: Change FDT loading address to avoid overlaping   Hui Liu
• [U-Boot] [PATCH 1/6] driver:i2c:s3c24x0: adapt driver to new i2c   Piotr Wilczek
• [U-Boot] [PATCH 1/6] driver:i2c:s3c24x0: adapt driver to new i2c   Heiko Schocher
• [U-Boot] [PATCH 1/6] driver:i2c:s3c24x0: adapt driver to new i2c   Piotr Wilczek
• [U-Boot] [PATCH 1/6] driver:i2c:s3c24x0: adapt driver to new i2c   Heiko Schocher
• [U-Boot] [PATCH 1/6] video: remove AT91 legacy API from bus_vcxk   Jens Scharsig
• [U-Boot] [PATCH 1/6] video: remove AT91 legacy API from bus_vcxk   Anatolij Gustschin
• [U-Boot] [PATCH 1/6][v2] powerpc:Add support of SPL non-relocation   Scott Wood
• [U-Boot] [PATCH 1/7 V2] mmc: Add some usefull macro definition   Haijun Zhang
• [U-Boot] [PATCH 1/7] mmc: Add some usefull macro definition   Haijun Zhang
• [U-Boot] [PATCH 1/7] mmc: Add some usefull macro definition   Jaehoon Chung
• [U-Boot] [PATCH 1/7] mmc: Add some usefull macro definition   Zhang Haijun
• [U-Boot] [PATCH 1/7] sandbox: Rename sb_cmdline_option to sandbox_cmdline_option   Simon Glass
• [U-Boot] [PATCH 1/9 V7] EXYNOS5: Create a common board file   Rajeshwari S Shinde
• [U-Boot] [PATCH 1/9 v8] EXYNOS5: Create a common board file   Rajeshwari S Shinde
• [U-Boot] [PATCH 1/9] ARM: HYP/non-sec: fix alignment requirements for vectors   Masahiro Yamada
• [U-Boot] [PATCH 1/9] ARM: HYP/non-sec: fix alignment requirements for vectors   Marc Zyngier
• [U-Boot] [PATCH 1/9] ARM: HYP/non-sec: fix alignment requirements for vectors   Marc Zyngier
• [U-Boot] [PATCH 1/9] ARM: HYP/non-sec: fix alignment requirements for vectors   Andre Przywara
• [U-Boot] [PATCH 10/14] ARM: AM43xx: clocks: Update DPLL details for EPOS EVM   Lokesh Vutla
• [U-Boot] [PATCH 10/14] ARM: AM43xx: clocks: Update DPLL details for EPOS EVM   Vaibhav Bedia
• [U-Boot] [PATCH 10/14] ARM: AM43xx: clocks: Update DPLL details for EPOS EVM   Lokesh Vutla
• [U-Boot] [PATCH 10/22] drivers/net/fm: descend only when CONFIG_FMAN_ENET=y   Masahiro Yamada
• [U-Boot] [PATCH 10/32] sandbox: block driver using host file/device as backing store   Simon Glass
• [U-Boot] [PATCH 10/34] spi: Add zynq qspi controller driver   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 10/34] spi: Add zynq qspi controller driver   thomas.langer at lantiq.com
• [U-Boot] [PATCH 10/34] spi: Add zynq qspi controller driver   Dinh Nguyen
• [U-Boot] [PATCH 10/34] spi: Add zynq qspi controller driver   Dinh Nguyen
• [U-Boot] [PATCH 10/34] spi: Add zynq qspi controller driver   Jagan Teki
• [U-Boot] [PATCH 10/34] spi: Add zynq qspi controller driver   Jagan Teki
• [U-Boot] [PATCH 11/14] ARM: AM43xx: clocks: Add DPLL data for GP EVM   Vaibhav Bedia
• [U-Boot] [PATCH 11/14] ARM: AM43xx: clocks: Add DPLL data for GP EVM   Lokesh Vutla
• [U-Boot] [PATCH 11/22] drivers/net/npe: descend only when CONFIG_IXP4XX_NPE=y   Masahiro Yamada
• [U-Boot] [PATCH 11/32] sandbox: Improve/augment memory allocation functions   Simon Glass
• [U-Boot] [PATCH 11/34] zynq-common: Enable CONFIG_ZYNQ_QSPI   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 12/14] ARM: AM43xx: EPOS_EVM: Add support for LPDDR2   Vaibhav Bedia
• [U-Boot] [PATCH 12/14] ARM: AM43xx: EPOS_EVM: Add support for LPDDR2   Vaibhav Bedia
• [U-Boot] [PATCH 12/14] ARM: AM43xx: EPOS_EVM: Add support for LPDDR2   Lokesh Vutla
• [U-Boot] [PATCH 12/14] ARM: AM43xx: EPOS_EVM: Add support for LPDDR2   Lokesh Vutla
• [U-Boot] [PATCH 12/14] ARM: AM43xx: EPOS_EVM: Add support for LPDDR2   Tom Rini
• [U-Boot] [PATCH 12/22] Makefile: rename all libraries to built-in.o   Masahiro Yamada
• [U-Boot] [PATCH 12/32] sandbox: Correct help message <arg> garbling   Simon Glass
• [U-Boot] [PATCH 12/34] zynq: Add zynq zc70x board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Lokesh Vutla
• [U-Boot] [PATCH 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Vaibhav Bedia
• [U-Boot] [PATCH 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Lokesh Vutla
• [U-Boot] [PATCH 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Vaibhav Bedia
• [U-Boot] [PATCH 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Lokesh Vutla
• [U-Boot] [PATCH 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Vaibhav Bedia
• [U-Boot] [PATCH 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Sekhar Nori
• [U-Boot] [PATCH 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Vaibhav Bedia
• [U-Boot] [PATCH 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Tom Rini
• [U-Boot] [PATCH 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Tom Rini
• [U-Boot] [PATCH 13/22] Makefile: refactor a little   Masahiro Yamada
• [U-Boot] [PATCH 13/32] sandbox: Allow return from board_init_f()   Simon Glass
• [U-Boot] [PATCH 13/34] zynq: Add zynq zed board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 14/14] ARM: AM43xx: Add Maintainer   Lokesh Vutla
• [U-Boot] [PATCH 14/22] config.mk: delete unnecessary lines   Masahiro Yamada
• [U-Boot] [PATCH 14/32] sandbox: Implement the bootm command for sandbox   Simon Glass
• [U-Boot] [PATCH 14/34] zynq-common: Define CONFIG_SPI_FLASH_BAR   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 15/18] malta: store environment in flash   Paul Burton
• [U-Boot] [PATCH 15/22] tools: Makefile: delete redundant lines   Masahiro Yamada
• [U-Boot] [PATCH 15/32] sandbox: Allow the console to work earlier   Simon Glass
• [U-Boot] [PATCH 15/34] zynq: Add PHYS_SDRAM_1_SIZE config   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 15/34] zynq: Add PHYS_SDRAM_1_SIZE config   Tom Rini
• [U-Boot] [PATCH 16/18] malta: setup PIIX4 interrupt route   Paul Burton
• [U-Boot] [PATCH 16/18] malta: setup PIIX4 interrupt route   Marek Vasut
• [U-Boot] [PATCH 16/18] malta: setup PIIX4 interrupt route   Paul Burton
• [U-Boot] [PATCH 16/18] malta: setup PIIX4 interrupt route   Marek Vasut
• [U-Boot] [PATCH 16/18] malta: setup PIIX4 interrupt route   Paul Burton
• [U-Boot] [PATCH 16/18] malta: setup PIIX4 interrupt route   Marek Vasut
• [U-Boot] [PATCH 16/22] Makefile: delete unused lines   Masahiro Yamada
• [U-Boot] [PATCH 16/32] sandbox: Add -i option to enter interactive mode   Simon Glass
• [U-Boot] [PATCH 16/34] zynq-common: Define exact TEXT_BASE   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 17/22] powerpc: mpc83xx: delete unused rules   Masahiro Yamada
• [U-Boot] [PATCH 17/32] sandbox: Allow reading/writing of RAM buffer   Simon Glass
• [U-Boot] [PATCH 17/34] zynq: zc70x: Add Catalyst 24WC08 EEPROM config support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 18/22] powerpc: mpc83xx: Do not create a symbolic link to ddr-gen2.c   Masahiro Yamada
• [U-Boot] [PATCH 18/32] sandbox: Add facility to save/restore sandbox state   Simon Glass
• [U-Boot] [PATCH 18/34] zynq: Add zynq microzed board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 19/22] powerpc: mpc824x: Do not create a symbolic link to bedbug_603e.c   Masahiro Yamada
• [U-Boot] [PATCH 19/32] sandbox: tpm: Add TPM emulation   Simon Glass
• [U-Boot] [PATCH 19/34] zynq: Add zynq_zc770 xm010 board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 2/2 v2] samsung: i2c: Enable new CONFIG_SYS_I2C framework   Naveen Krishna Chatradhi
• [U-Boot] [PATCH 2/2 v3] arm: rmobile: Add support koelsch board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/2 v4] arm: rmobile: Add support koelsch board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/2 v4] arm: rmobile: Add support lager board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/2] ARM: at91: sama5d3: mmc: save enviroment as a fat file (uboot.env)   Josh Wu
• [U-Boot] [PATCH 2/2] ARM: at91: sama5d3: mmc: save enviroment as a fat file (uboot.env)   Bo Shen
• [U-Boot] [PATCH 2/2] ARM: at91: sama5d3: mmc: save enviroment as a fat file (uboot.env)   Josh Wu
• [U-Boot] [PATCH 2/2] ARM: DRA7/OMAP5: EMIF: Add workaround for bug 0039   Sricharan R
• [U-Boot] [PATCH 2/2] arm: rmobile: Remove config.mk   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/2] arm: rmobile: Remove config.mk   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/2] ARM: versatile: pass console setting to the kernel   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: versatile: pass console setting to the kernel   Linus Walleij
• [U-Boot] [PATCH 2/2] ARM: versatile: pass console setting to the kernel   Linus Walleij
• [U-Boot] [PATCH 2/2] blackfin: Do not generate unused binary init.elf   Masahiro Yamada
• [U-Boot] [PATCH 2/2] blackfin: Do not generate unused binary init.elf   Zhang, Sonic
• [U-Boot] [PATCH 2/2] blackfin: Do not generate unused binary init.elf   Masahiro Yamada
• [U-Boot] [PATCH 2/2] blackfin: Do not generate unused binary init.elf   Sonic Zhang
• [U-Boot] [PATCH 2/2] driver:i2c:s3c24x0: fix clock init for hsi2c   Piotr Wilczek
• [U-Boot] [PATCH 2/2] env export fix: compute the CRC on the real lenght of the exported variables.   Wolfgang Denk
• [U-Boot] [PATCH 2/2] env export fix: compute the CRC on the real lenght of the exported variables.   Pierre Aubert
• [U-Boot] [PATCH 2/2] env export fix: compute the CRC on the real lenght of the exported variables.   Pierre AUBERT
• [U-Boot] [PATCH 2/2] i.MX6DQ/DLS: whitespace: Align MX6_PAD_DECL columns   Eric Nelson
• [U-Boot] [PATCH 2/2] i2c: fti2c010: migrate to new i2c model   Kuo-Jung Su
• [U-Boot] [PATCH 2/2] Makefile: Select objects by CONFIG_ rather than $(ARCH) or $(CPU)   Masahiro Yamada
• [U-Boot] [PATCH 2/2] phy: Use general phy code for smsc lan8720a   David Dueck
• [U-Boot] [PATCH 2/2] powerpc/t104xrdb: Add T1042RDB_PI board support   Scott Wood
• [U-Boot] [PATCH 2/2] sandbox: convert to common time functions   Rob Herring
• [U-Boot] [PATCH 2/2] sandbox: convert to common time functions   Simon Glass
• [U-Boot] [PATCH 2/2] sandbox: convert to common time functions   Rob Herring
• [U-Boot] [PATCH 2/2] sandbox: convert to common time functions   Simon Glass
• [U-Boot] [PATCH 2/2] sandbox: convert to common time functions   Tom Rini
• [U-Boot] [PATCH 2/2] socfpga: Adding Scan Manager IOCSR handoff files   Chin Liang See
• [U-Boot] [PATCH 2/2] spi: bfin_spi6xx: Remove unnecessary test for bus and pins[bus]   Axel Lin
• [U-Boot] [PATCH 2/2] vexpress: Add vexpress qemu variant   Ian Campbell
• [U-Boot] [PATCH 2/2] vexpress: Add vexpress qemu variant   Ian Campbell
• [U-Boot] [PATCH 2/2] wandboard: Return the error when cpu_eth_init() fails   Fabio Estevam
• [U-Boot] [PATCH 2/2] wandboard: Return the error when cpu_eth_init() fails   Stefano Babic
• [U-Boot] [PATCH 2/2][v2] powerpc/t104xrdb: Add T1042RDB_PI board support   york sun
• [U-Boot] [PATCH 2/3 v5] arm: rmobile: Add support R8A7790   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/3] cm_t335: add support for status LED   Ilya Ledvich
• [U-Boot] [PATCH 2/3] gpio_led: check gpio_request() return value   Igor Grinberg
• [U-Boot] [PATCH 2/3] gpio_led: check gpio_request() return value   Igor Grinberg
• [U-Boot] [PATCH 2/4 v2] blackfin: If none ADI_GPIOX macro is defined, use ADI_GPIO1 as default   Sonic Zhang
• [U-Boot] [PATCH 2/4 v2] powerpc/mpc85xx: Add T2080/T2081 SoC support   York Sun
• [U-Boot] [PATCH 2/4 v2] powerpc/mpc85xx: Add T2080/T2081 SoC support   Shengzhou Liu
• [U-Boot] [PATCH 2/4] am33xx, davinci: Create and use <asm/davinci_rtc.h>   Tom Rini
• [U-Boot] [PATCH 2/4] arm:vf610:Enable the DSPI for Freescale vf610 platform   Stefano Babic
• [U-Boot] [PATCH 2/4] arm:vf610:Enable the DSPI for Freescale vf610 platform   Chao Fu
• [U-Boot] [PATCH 2/4] at91: redefine legacy GPIO PIN_BASE   Andreas Bießmann
• [U-Boot] [PATCH 2/4] blackfin: Use ADI_GPIO2 driver other than the default ADI_GPIO1.   Sonic Zhang
• [U-Boot] [PATCH 2/4] board:trats2: fix environmental variables   Piotr Wilczek
• [U-Boot] [PATCH 2/4] malta: correct UART baudrate   Paul Burton
• [U-Boot] [PATCH 2/4] mx31pdk: Fix pmic_init() argument   Fabio Estevam
• [U-Boot] [PATCH 2/4] mx31pdk: Fix pmic_init() argument   Stefano Babic
• [U-Boot] [PATCH 2/4] mx6: add structs for mmdc and ddr iomux registers   Edward Lin
• [U-Boot] [PATCH 2/4] mx6: add structs for mmdc and ddr iomux registers   Eric Nelson
• [U-Boot] [PATCH 2/4] mx6: add structs for mmdc and ddr iomux registers   Edward Lin
• [U-Boot] [PATCH 2/4] mx6: add structs for mmdc and ddr iomux registers   Stefano Babic
• [U-Boot] [PATCH 2/4] mx6: add structs for mmdc and ddr iomux registers   Tapani
• [U-Boot] [PATCH 2/4] mx6: add structs for mmdc and ddr iomux registers   Stefano Babic
• [U-Boot] [PATCH 2/4] powerpc/mpc85xx: Add T2080/T2081 SoC support   Shengzhou Liu
• [U-Boot] [PATCH 2/4] udoo: Add SATA disk support.   Giuseppe Pagano
• [U-Boot] [PATCH 2/4] udoo: Add SATA disk support.   Stefano Babic
• [U-Boot] [PATCH 2/4] udoo: Add SATA disk support.   Giuseppe Pagano
• [U-Boot] [PATCH 2/5] ARM: lib: Add cpu_clock_teardown() call   Marek Vasut
• [U-Boot] [PATCH 2/5] ARM: lib: Add cpu_clock_teardown() call   Stefano Babic
• [U-Boot] [PATCH 2/5] ARM: lib: Add cpu_clock_teardown() call   Marek Vasut
• [U-Boot] [PATCH 2/5] ARM: lib: Add cpu_clock_teardown() call   Stefano Babic
• [U-Boot] [PATCH 2/5] arm: omap3: Add SPL support to tao3530   Stefan Roese
• [U-Boot] [PATCH 2/5] arm: omap3: Add SPL support to tao3530   Tapani Utriainen
• [U-Boot] [PATCH 2/5] arm: omap3: Add SPL support to tao3530   Tom Rini
• [U-Boot] [PATCH 2/5] arm: omap3: Add SPL support to tao3530   Stefan Roese
• [U-Boot] [PATCH 2/5] arm: omap3: Add SPL support to tao3530   Tom Rini
• [U-Boot] [PATCH 2/5] arm: omap3: Add SPL support to tao3530   Stefan Roese
• [U-Boot] [PATCH 2/5] ARM: OMAP5: Add Pipe3 PHY driver   Roger Quadros
• [U-Boot] [PATCH 2/5] ARM: OMAP5: Add Pipe3 PHY driver   Tom Rini
• [U-Boot] [PATCH 2/5] ARM: OMAP5: Add Pipe3 PHY driver   Roger Quadros
• [U-Boot] [PATCH 2/5] ARM: OMAP5: Add Pipe3 PHY driver   Tom Rini
• [U-Boot] [PATCH 2/5] ARM: OMAP5: Add Pipe3 PHY driver   Roger Quadros
• [U-Boot] [PATCH 2/5] i.MX6DQ/DLS: remove useless mux/pad declarations   Eric Nelson
• [U-Boot] [PATCH 2/5] imx: Define common routines to set cpu and board environment variables   Eric Nelson
• [U-Boot] [PATCH 2/5] wandboard: Change FDT loading address to avoid overlaping   Otavio Salvador
• [U-Boot] [PATCH 2/6] board:arndale: switch to new i2c framework   Piotr Wilczek
• [U-Boot] [PATCH 2/6][v2] powerpc/SPL:Allow Parsing of LAW table in both SPL & non SPL   Scott Wood
• [U-Boot] [PATCH 2/7 V2] mmc: Get secure erase information from card   Haijun Zhang
• [U-Boot] [PATCH 2/7] mmc: Get secure erase information from card   Haijun Zhang
• [U-Boot] [PATCH 2/7] sf: Add spi_flash_probe_fdt() to locate SPI by FDT node   Simon Glass
• [U-Boot] [PATCH 2/9 V7] Exynos5420: Add base addresses for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 2/9 v8] Exynos5420: Add base addresses for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 2/9] ARM: HYP/non-sec: move switch to non-sec to the last boot phase   Marc Zyngier
• [U-Boot] [PATCH 2/9] ARM: HYP/non-sec: move switch to non-sec to the last boot phase   Andre Przywara
• [U-Boot] [PATCH 20/22] arm: rmobile: Do not create a symbolic link to sh timer   Masahiro Yamada
• [U-Boot] [PATCH 20/32] sandbox: dts: Add display and keyboard to sandbox   Simon Glass
• [U-Boot] [PATCH 20/34] zynq: Add zynq_zc770 xm013 board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 21/22] Makefile: move fs/fat/ entry to drivers/Makefile   Masahiro Yamada
• [U-Boot] [PATCH 21/22] Makefile: move fs/fat/ entry to drivers/Makefile   Simon Glass
• [U-Boot] [PATCH 21/32] sandbox: Add a prototype for cleanup_before_linux()   Simon Glass
• [U-Boot] [PATCH 21/34] zynq: Add zynq_zc770 xm012 board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 22/22] fs: descend into sub directories when it is necessary   Masahiro Yamada
• [U-Boot] [PATCH 22/32] sandbox: tpm: Fix nvwrite command   Simon Glass
• [U-Boot] [PATCH 22/34] nand: Add zynq nand controller driver support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 22/34] nand: Add zynq nand controller driver support   Scott Wood
• [U-Boot] [PATCH 23/32] cros_ec: Add an enum for the number of flash regions   Simon Glass
• [U-Boot] [PATCH 23/34] zynq-common: Define CONFIG_NAND_ZYNQ   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 23/34] zynq-common: Define CONFIG_NAND_ZYNQ   Scott Wood
• [U-Boot] [PATCH 24/32] fdt: Add a function for reading a flash map entry   Simon Glass
• [U-Boot] [PATCH 24/34] zynq: Add zynq_zc770 xm011 board support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 25/32] cros_ec: Move EC interface into common library   Simon Glass
• [U-Boot] [PATCH 25/34] zynq: Add support to find bootmode   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 25/34] zynq: Add support to find bootmode   Tom Rini
• [U-Boot] [PATCH 26/32] cros_ec: Add a function for decoding the Chrome OS EC flashmap   Simon Glass
• [U-Boot] [PATCH 26/34] zynq-common: Define default environment   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 27/32] cros_ec: sandbox: Add Chrome OS EC emulation   Simon Glass
• [U-Boot] [PATCH 27/34] zynq-common: Change Env. Sector size to 128Kb   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 28/32] sandbox: Add os_jump_to_image() to run another executable   Simon Glass
• [U-Boot] [PATCH 28/34] zynq-common: Define flash env. partition   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 29/32] sandbox: Add -j option to indicate a jump from a previous U-Boot   Simon Glass
• [U-Boot] [PATCH 29/34] zynq-common: Define CONFIG_ENV_OVERWRITE   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 3/3 v5] arm: rmobile: Add support lager board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/3] ahci: support LBA48 data reads for 2+TB drives   Anatolij Gustschin
• [U-Boot] [PATCH 3/3] cm_t335: add support for pca9555 i2c gpio extender   Ilya Ledvich
• [U-Boot] [PATCH 3/3] gpio_led: add support for inverted polarity   Igor Grinberg
• [U-Boot] [PATCH 3/3] gpio_led: add support for inverted polarity   Igor Grinberg
• [U-Boot] [PATCH 3/3] gpio_led: add support for inverted polarity   Otavio Salvador
• [U-Boot] [PATCH 3/4 v2] blackfin: Add missing macro CONFIG_BFIN_SERIAL   Sonic Zhang
• [U-Boot] [PATCH 3/4 v2] powerpc/t2080qds: add support for t2080qds board   York Sun
• [U-Boot] [PATCH 3/4 v2] powerpc/t2080qds: add support for t2080qds board   Shengzhou Liu
• [U-Boot] [PATCH 3/4] arm: rmobile: Add support R8A7791   Albert ARIBAUD
• [U-Boot] [PATCH 3/4] arm: rmobile: Add support R8A7791   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/4] at91: nand: switch atmel_nand to generic GPIO API   Andreas Bießmann
• [U-Boot] [PATCH 3/4] blackfin: If none ADI_GPIOX macro is defined, use ADI_GPIO1 as default.   Sonic Zhang
• [U-Boot] [PATCH 3/4] board:trats2: fix access to samsung registers   Piotr Wilczek
• [U-Boot] [PATCH 3/4] bootcount_davinci: Switch to scratch register #2   Tom Rini
• [U-Boot] [PATCH 3/4] efikamx: Fix pmic_init() argument   Fabio Estevam
• [U-Boot] [PATCH 3/4] efikamx: Fix pmic_init() argument   Stefano Babic
• [U-Boot] [PATCH 3/4] malta: enable PIIX4 SERIRQ   Paul Burton
• [U-Boot] [PATCH 3/4] mtd:vf610twr:add Flash at26df081a for vf610twr platform   Chao Fu
• [U-Boot] [PATCH 3/4] mx6: add co-existing pad configuration macros mx6q/mx6dl   Eric Nelson
• [U-Boot] [PATCH 3/4] mx6: add co-existing pad configuration macros mx6q/mx6dl   Edward Lin
• [U-Boot] [PATCH 3/4] powerpc/t2080qds: add support for t2080qds board   Shengzhou Liu
• [U-Boot] [PATCH 3/4] powerpc/t2080qds: add support for t2080qds board   Wolfgang Denk
• [U-Boot] [PATCH 3/4] powerpc/t2080qds: add support for t2080qds board   York Sun
• [U-Boot] [PATCH 3/4] udoo: Adjust default boot envirnment   Giuseppe Pagano
• [U-Boot] [PATCH 3/4] udoo: Adjust default boot envirnment   Stefano Babic
• [U-Boot] [PATCH 3/4] udoo: Adjust default boot envirnment   Giuseppe Pagano
• [U-Boot] [PATCH 3/5] ARM: mx6: Add PCI express clock configuration   Stefano Babic
• [U-Boot] [PATCH 3/5] ARM: mx6: Add PCI express clock configuration   Marek Vasut
• [U-Boot] [PATCH 3/5] arm: omap3: Remove bootargs mem_size handling   Stefan Roese
• [U-Boot] [PATCH 3/5] ARM: OMAP5: Add PRCM and Control information for SATA   Roger Quadros
• [U-Boot] [PATCH 3/5] i.MX6: nitrogen6x/sabrelite: override set_board_name()   Eric Nelson
• [U-Boot] [PATCH 3/5] i.MX6: nitrogen6x/sabrelite: override set_board_name()   Stefano Babic
• [U-Boot] [PATCH 3/5] i.MX6: nitrogen6x/sabrelite: override set_board_name()   Eric Nelson
• [U-Boot] [PATCH 3/5] i.MX6: nitrogen6x/sabrelite: override set_board_name()   Stefano Babic
• [U-Boot] [PATCH 3/5] i.MX6DQ: Add Pinmux settings that are present in mainline and Dual-Lite/Solo   Eric Nelson
• [U-Boot] [PATCH 3/5] udoo: Change FDT loading address to avoid overlaping   Otavio Salvador
• [U-Boot] [PATCH 3/5] udoo: Change FDT loading address to avoid overlaping   Wolfgang Denk
• [U-Boot] [PATCH 3/5] udoo: Change FDT loading address to avoid overlaping   Otavio Salvador
• [U-Boot] [PATCH 3/5] udoo: Change FDT loading address to avoid overlaping   Wolfgang Denk
• [U-Boot] [PATCH 3/6] board:VCMA9 switch to new i2c framework   Piotr Wilczek
• [U-Boot] [PATCH 3/6] gzip: correctly bounds-check output buffer   Michal Simek
• [U-Boot] [PATCH 3/6] gzip: correctly bounds-check output buffer   Kees Cook
• [U-Boot] [PATCH 3/6] gzip: correctly bounds-check output buffer   Michal Simek
• [U-Boot] [PATCH 3/6] gzip: correctly bounds-check output buffer   Michal Simek
• [U-Boot] [PATCH 3/6][v2] common/env: Point default envirenoment for GD   Scott Wood
• [U-Boot] [PATCH 3/7 V2] mmc: Enhance erase handling procedure   Haijun Zhang
• [U-Boot] [PATCH 3/7] mmc: Enhance erase handling procedure   Haijun Zhang
• [U-Boot] [PATCH 3/7] spi: Add device tree binding for SPI bus   Simon Glass
• [U-Boot] [PATCH 3/9 V7] Exynos5420: Add clock initialization for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 3/9 v8] Exynos5420: Add clock initialization for 5420   Minkyu Kang
• [U-Boot] [PATCH 3/9 v8] Exynos5420: Add clock initialization for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 3/9] ARM: HYP/non-sec: add a barrier after setting SCR.NS==1   Christoffer Dall
• [U-Boot] [PATCH 3/9] ARM: HYP/non-sec: add a barrier after setting SCR.NS==1   Marc Zyngier
• [U-Boot] [PATCH 3/9] ARM: HYP/non-sec: add a barrier after setting SCR.NS==1   Andre Przywara
• [U-Boot] [PATCH 3/9] ARM: HYP/non-sec: add a barrier after setting SCR.NS==1   Marc Zyngier
• [U-Boot] [PATCH 3/9] ARM: HYP/non-sec: add a barrier after setting SCR.NS==1   Christoffer Dall
• [U-Boot] [PATCH 30/32] sandbox: Add SDL library for LCD, keyboard, audio   Simon Glass
• [U-Boot] [PATCH 30/34] zynq-common: Define ethaddr in default env.   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 30/34] zynq-common: Define ethaddr in default env.   Tom Rini
• [U-Boot] [PATCH 31/32] sandbox: Add a simple sound driver   Simon Glass
• [U-Boot] [PATCH 31/34] dts: zynq: Add basic fdt support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 32/32] sandbox: Add LCD driver   Simon Glass
• [U-Boot] [PATCH 32/32] sandbox: Add LCD driver   Masahiro Yamada
• [U-Boot] [PATCH 32/34] gpio: zynq: Add dummy gpio routines   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 33/34] zynq-common: Enable verified boot(RSA)   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 34/34] dts: zynq: Add more zynq dts files   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 4/4 v2] blackfin: soft-i2c: No need to define blackfin specific soft i2c operations   Sonic Zhang
• [U-Boot] [PATCH 4/4 v2] blackfin: soft-i2c: No need to define blackfin specific soft i2c operations   Heiko Schocher
• [U-Boot] [PATCH 4/4 v2] blackfin: soft-i2c: No need to define blackfin specific soft i2c operations   Zhang, Sonic
• [U-Boot] [PATCH 4/4 v2] blackfin: soft-i2c: No need to define blackfin specific soft i2c operations   Heiko Schocher
• [U-Boot] [PATCH 4/4 v2] blackfin: soft-i2c: No need to define blackfin specific soft i2c operations   Heiko Schocher
• [U-Boot] [PATCH 4/4 v2] t2080qds/ramboot: enable PBL tool for t2080qds   Shengzhou Liu
• [U-Boot] [PATCH 4/4 v2] t2080qds/ramboot: enable PBL tool for t2080qds   York Sun
• [U-Boot] [PATCH 4/4] at91: switch coloured LED to gpio API   Andreas Bießmann
• [U-Boot] [PATCH 4/4] blackfin: Add missing macro CONFIG_BFIN_SERIAL   Sonic Zhang
• [U-Boot] [PATCH 4/4] board:trats2: update Tizen partition definitions   Piotr Wilczek
• [U-Boot] [PATCH 4/4] M68k:Update the DSPI interface based on the new DSPI driver.   Chao Fu
• [U-Boot] [PATCH 4/4] M68k:Update the DSPI interface based on the new DSPI driver.   Stefano Babic
• [U-Boot] [PATCH 4/4] M68k:Update the DSPI interface based on the new DSPI driver.   Chao Fu
• [U-Boot] [PATCH 4/4] M68k:Update the DSPI interface based on the new DSPI driver.   Stefano Babic
• [U-Boot] [PATCH 4/4] malta: set CONFIG_SYS_BOOTM_LEN to 64MB   Paul Burton
• [U-Boot] [PATCH 4/4] mx6: add arch-specific spl header   Edward Lin
• [U-Boot] [PATCH 4/4] power: power_fsl: Pass p->bus in the same way for SPI and I2C cases   Fabio Estevam
• [U-Boot] [PATCH 4/4] power: power_fsl: Pass p->bus in the same way for SPI and I2C cases   Stefano Babic
• [U-Boot] [PATCH 4/4] t2080qds/ramboot: enable PBL tool for t2080qds   Shengzhou Liu
• [U-Boot] [PATCH 4/4] TI:am33xx: Add bootcount support to ti_am335x_common.h   Tom Rini
• [U-Boot] [PATCH 4/4] udoo: fix watchdog setting   Giuseppe Pagano
• [U-Boot] [PATCH 4/4] udoo: fix watchdog setting   Stefano Babic
• [U-Boot] [PATCH 4/4] udoo: fix watchdog setting   Giuseppe Pagano
• [U-Boot] [PATCH 4/5] ARM: mx6: Add PCI express driver   Marek Vasut
• [U-Boot] [PATCH 4/5] ARM: mx6: Add PCI express driver   Stefano Babic
• [U-Boot] [PATCH 4/5] arm: omap3: Add board revision output to tao3530   Stefan Roese
• [U-Boot] [PATCH 4/5] ARM: OMAP5: Add SATA platform glue   Roger Quadros
• [U-Boot] [PATCH 4/5] ARM: OMAP5: Add SATA platform glue   Tom Rini
• [U-Boot] [PATCH 4/5] ARM: OMAP5: Add SATA platform glue   Roger Quadros
• [U-Boot] [PATCH 4/5] i.MX6: nitrogen6x/sabrelite: initialize imx_type and board_name values   Eric Nelson
• [U-Boot] [PATCH 4/5] i.MX6DQ/DLS: remove unused pad declarations   Eric Nelson
• [U-Boot] [PATCH 4/5] nitrogen6x: Change FDT loading address to avoid overlaping   Otavio Salvador
• [U-Boot] [PATCH 4/5] nitrogen6x: Change FDT loading address to avoid overlaping   Marek Vasut
• [U-Boot] [PATCH 4/5] nitrogen6x: Change FDT loading address to avoid overlaping   Otavio Salvador
• [U-Boot] [PATCH 4/5] nitrogen6x: Change FDT loading address to avoid overlaping   Marek Vasut
• [U-Boot] [PATCH 4/6] board:smdk5250: switch to new i2c framework   Piotr Wilczek
• [U-Boot] [PATCH 4/6][v2] Makefile:Add u-boot-with-spl-pbl.bin target for SPL   Scott Wood
• [U-Boot] [PATCH 4/7 V2] mmc: Update the handling of returned erase block   Haijun Zhang
• [U-Boot] [PATCH 4/7] mmc: Update the handling of returned erase block   Haijun Zhang
• [U-Boot] [PATCH 4/7] mmc: Update the handling of returned erase block   Jaehoon Chung
• [U-Boot] [PATCH 4/7] sandbox: spi: Add SPI emulation bus   Simon Glass
• [U-Boot] [PATCH 4/9 V7] Exynos5420: Add DDR3 initialization for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 4/9 v8] Exynos5420: Add DDR3 initialization for 5420   Minkyu Kang
• [U-Boot] [PATCH 4/9 v8] Exynos5420: Add DDR3 initialization for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 4/9] ARM: non-sec: reset CNTVOFF to zero   Marc Zyngier
• [U-Boot] [PATCH 4/9] ARM: non-sec: reset CNTVOFF to zero   Andre Przywara
• [U-Boot] [PATCH 4/9] ARM: non-sec: reset CNTVOFF to zero   Marc Zyngier
• [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite   Marek Vasut
• [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite   Stefano Babic
• [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite   Marek Vasut
• [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite   Eric Nelson
• [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite   Marek Vasut
• [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite   Eric Nelson
• [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite   Stefano Babic
• [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite   Marek Vasut
• [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite   Marek Vasut
• [U-Boot] [PATCH 5/5] arm: omap3: Add HEAD acoustics (HA) board variant omap3_ha to tao3530   Stefan Roese
• [U-Boot] [PATCH 5/5] ARM: omap5_uevm: Add SATA support   Roger Quadros
• [U-Boot] [PATCH 5/5] cgtqmx6eval: Change FDT loading address to avoid overlaping   Otavio Salvador
• [U-Boot] [PATCH 5/5] i.MX6: mx6*sabre*: initialize imx_type and board_name values   Eric Nelson
• [U-Boot] [PATCH 5/5] i.MX6DQ/DLS: whitespace: Align IOMUX_PAD column in declarations   Eric Nelson
• [U-Boot] [PATCH 5/6] board:trats: switch to new i2c framework   Piotr Wilczek
• [U-Boot] [PATCH 5/6][v2] SPL:Defines function required to env read for IFC & env_nand   Scott Wood
• [U-Boot] [PATCH 5/7 V2] mmc: Enhance mmcinfo command   Haijun Zhang
• [U-Boot] [PATCH 5/7] mmc: Enhance mmcinfo command   Haijun Zhang
• [U-Boot] [PATCH 5/7] sandbox: spi: Add new SPI flash driver   Simon Glass
• [U-Boot] [PATCH 5/9 V7] Exynos5420: Add support for 5420 in pinmux and gpio   Rajeshwari S Shinde
• [U-Boot] [PATCH 5/9 v8] Exynos5420: Add support for 5420 in pinmux and gpio   Rajeshwari S Shinde
• [U-Boot] [PATCH 5/9] ARM: HYP/non-sec: add generic ARMv7 PSCI code   Marc Zyngier
• [U-Boot] [PATCH 6/6] board:trats2: switch Trats2 to new i2c framework   Piotr Wilczek
• [U-Boot] [PATCH 6/6][v2] T1040QDS: Add support of 2 stage NAND boot loader   Scott Wood
• [U-Boot] [PATCH 6/7 V2] Powerpc/esdhc: Add esdhc host version define   Haijun Zhang
• [U-Boot] [PATCH 6/7] Powerpc/esdhc: Add esdhc host version define   Haijun Zhang
• [U-Boot] [PATCH 6/7] spi: Tidy up FDT SPI implementation   Simon Glass
• [U-Boot] [PATCH 6/9 V7] Exynos5420: Add base patch for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 6/9 v8] Exynos5420: Add base patch for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 6/9 v8] Exynos5420: Add base patch for SMDK5420   Minkyu Kang
• [U-Boot] [PATCH 6/9] ARM: HYP/non-sec: make pen code sections depend on !ARMV7_PSCI   Marc Zyngier
• [U-Boot] [PATCH 7/7 V2] powerpc/esdhc: Update esdhc command execution process   Haijun Zhang
• [U-Boot] [PATCH 7/7] powerpc/esdhc: Update esdhc command execution process   Haijun Zhang
• [U-Boot] [PATCH 7/7] sandbox: spi: Enable new spi/sf layers   Simon Glass
• [U-Boot] [PATCH 7/9 V7] DTS: Add dts support for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 7/9 v8] DTS: Add dts support for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 7/9] ARM: HYP/non-sec: add the option for a second-stage monitor   Marc Zyngier
• [U-Boot] [PATCH 8/9 V7] Config: Add initial config for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 8/9 v8] Config: Add initial config for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 8/9 v8] Config: Add initial config for SMDK5420   Minkyu Kang
• [U-Boot] [PATCH 8/9] sunxi: HYP/non-sec: add sun7i PSCI backend   Marc Zyngier
• [U-Boot] [PATCH 9/9 V7] SPL: EXYNOS: Prepare for variable size SPL support   Rajeshwari S Shinde
• [U-Boot] [PATCH 9/9 v8] SPL: EXYNOS: Prepare for variable size SPL support   Rajeshwari S Shinde
• [U-Boot] [PATCH 9/9] sunxi: HYP/non-sec: configure CNTFRQ on all CPUs   Marc Zyngier
• [U-Boot] [PATCH RFC 0/7] Add support for WPJ344 board   Nikolaos Pasaloukos
• [U-Boot] [PATCH RFC 1/7] MIPS: AR7240: Address space declaration for SoC ar7240   Nikolaos Pasaloukos
• [U-Boot] [PATCH RFC 2/7] MIPS: AR7240: SPI drivers for ar7240   Nikolaos Pasaloukos
• [U-Boot] [PATCH RFC 3/7] MIPS: AR934x: Register Bitfields for SoC ar934x   Nikolaos Pasaloukos
• [U-Boot] [PATCH RFC 4/7] MIPS: AR7240: DRAM Initialization file   Nikolaos Pasaloukos
• [U-Boot] [PATCH RFC 5/7] WPJ344: Add support for WPJ344 board   Nikolaos Pasaloukos
• [U-Boot] [PATCH RFC 6/7] ATHEROS: AR934X: Add support for ar934x SoC   Nikolaos Pasaloukos
• [U-Boot] [PATCH RFC 7/7] NET: AR934x: Ethernet drivers for SoC AR934x   Nikolaos Pasaloukos
• [U-Boot] [PATCH RFC] imx: add multi-architecture README   Eric Nelson
• [U-Boot] [PATCH RFC] imx: add multi-architecture README   Eric Nelson
• [U-Boot] [PATCH RFC] imx: add multi-architecture README   Wolfgang Denk
• [U-Boot] [PATCH RFC] imx: add multi-architecture README   Wolfgang Denk
• [U-Boot] [PATCH RFC] imx: add multi-architecture README   Eric Nelson
• [U-Boot] [PATCH RFC] imx: add multi-architecture README   Eric Nelson
• [U-Boot] [PATCH RFC] imx: add multi-architecture README   Tapani
• [U-Boot] [PATCH RFC] imx: add multi-architecture README   Eric Nelson
• [U-Boot] [PATCH RFC] imx: add multi-architecture README   Eric Nelson
• [U-Boot] [PATCH RFC] imx: add multi-architecture README   Eric Nelson
• [U-Boot] [PATCH RFC] imx: add multi-architecture README   Eric Nelson
• [U-Boot] [PATCH RFC] imx: add multi-architecture README   Tapani
• [U-Boot] [PATCH RFC] imx: add multi-architecture README   Eric Nelson
• [U-Boot] [PATCH v1 0/5] mtd: nand: omap: clean omap_gpmc.h headers   Pekon Gupta
• [U-Boot] [PATCH v1 0/5] mtd: nand: omap: clean omap_gpmc.h headers   Pekon Gupta
• [U-Boot] [PATCH v1 0/6] ARM: refactor start.S files   Albert ARIBAUD
• [U-Boot] [PATCH v1 1/4] udoo: Move and optimize platform register setting.   Fabio Estevam
• [U-Boot] [PATCH v1 1/4] udoo: Move and optimize platform register setting.   Stefano Babic
• [U-Boot] [PATCH v1 1/4] udoo: Move and optimize platform register setting.   Giuseppe Pagano
• [U-Boot] [PATCH v1 1/5] mtd: nand: omap: remove redundant platform specific header: arch-xx/omap_gpmc.h   Pekon Gupta
• [U-Boot] [PATCH v1 1/5] mtd: nand: omap: remove redundant platform specific header: arch-xx/omap_gpmc.h   Pekon Gupta
• [U-Boot] [PATCH v1 1/6] arm1136: move cache code from start.S to cache.c   Albert ARIBAUD
• [U-Boot] [PATCH v1 1/6] arm1136: move cache code from start.S to cache.c   Benoît Thébaudeau
• [U-Boot] [Patch v1 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver   Scott Wood
• [U-Boot] [Patch v1 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver   york sun
• [U-Boot] [Patch v1 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver   Scott Wood
• [U-Boot] [Patch v1 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver   York Sun
• [U-Boot] [Patch v1 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver   Scott Wood
• [U-Boot] [Patch v1 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver   York Sun
• [U-Boot] [Patch v1 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver   Scott Wood
• [U-Boot] [Patch v1 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver   York Sun
• [U-Boot] [Patch v1 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver   Scott Wood
• [U-Boot] [PATCH v1 2/4] udoo: Add ethernet support (FEC + Micrel KSZ9031).   Fabio Estevam
• [U-Boot] [PATCH v1 2/4] udoo: Add ethernet support (FEC + Micrel KSZ9031).   Fabio Estevam
• [U-Boot] [PATCH v1 2/4] udoo: Add ethernet support (FEC + Micrel KSZ9031).   Fabio Estevam
• [U-Boot] [PATCH v1 2/4] udoo: Add ethernet support (FEC + Micrel KSZ9031).   Stefano Babic
• [U-Boot] [PATCH v1 2/4] udoo: Add ethernet support (FEC + Micrel KSZ9031).   Giuseppe Pagano
• [U-Boot] [PATCH v1 2/4] udoo: Add ethernet support (FEC + Micrel KSZ9031).   Giuseppe Pagano
• [U-Boot] [PATCH v1 2/4] udoo: Add ethernet support (FEC + Micrel KSZ9031).   Giuseppe Pagano
• [U-Boot] [PATCH v1 2/5] mtd: nand: omap: remove unused #defines from common omap_gpmc.h   Pekon Gupta
• [U-Boot] [PATCH v1 2/5] mtd: nand: omap: remove unused #defines from common omap_gpmc.h   Pekon Gupta
• [U-Boot] [PATCH v1 2/6] arm: move reset_cpu from start.S into cpu.c   Albert ARIBAUD
• [U-Boot] [PATCH v1 2/6] arm: move reset_cpu from start.S into cpu.c   Benoît Thébaudeau
• [U-Boot] [PATCH v1 3/4] udoo: Add SATA support on uDoo Board.   Giuseppe Pagano
• [U-Boot] [PATCH v1 3/4] udoo: Add SATA support on uDoo Board.   Otavio Salvador
• [U-Boot] [PATCH v1 3/4] udoo: Add SATA support on uDoo Board.   Giuseppe Pagano
• [U-Boot] [PATCH v1 3/5] mtd: nand: omap: merge duplicate GPMC data from different arch-xx headers into common omap_gpmc.h   Pekon Gupta
• [U-Boot] [PATCH v1 3/5] mtd: nand: omap: merge duplicate GPMC data from different arch-xx headers into common omap_gpmc.h   Pekon Gupta
• [U-Boot] [PATCH v1 3/6] arm: pxa: move SP check from start.S to cpuinfo.c   Albert ARIBAUD
• [U-Boot] [PATCH v1 3/6] arm: pxa: move SP check from start.S to cpuinfo.c   Marek Vasut
• [U-Boot] [Patch v1 3/6] Driver/DDR: Add Freescale DDR driver for ARM   Scott Wood
• [U-Boot] [Patch v1 3/6] Driver/DDR: Add Freescale DDR driver for ARM   york sun
• [U-Boot] [PATCH v1 4/5] mtd: nand: omap: move omap_gpmc.h from arch/arm/include/asm to drivers/mtd/nand   Pekon Gupta
• [U-Boot] [PATCH v1 4/5] mtd: nand: omap: move omap_gpmc.h from arch/arm/include/asm to drivers/mtd/nand   Pekon Gupta
• [U-Boot] [PATCH v1 4/6] arm: ixp: cosmetic: move code around in start.S   Albert ARIBAUD
• [U-Boot] [PATCH v1 5/5] mtd: nand: omap: move omap_elm.h from arch/arm/include/asm to drivers/mtd/nand   Pekon Gupta
• [U-Boot] [PATCH v1 5/5] mtd: nand: omap: move omap_elm.h from arch/arm/include/asm to drivers/mtd/nand   Pekon Gupta
• [U-Boot] [PATCH v1 5/6] arm: remove unused _end_vect and _vectors_end symbols   Albert ARIBAUD
• [U-Boot] [PATCH v1 6/6] arm: move exception handling out of start.S files   Albert ARIBAUD
• [U-Boot] [Patch v1 6/6] Driver/IFC: Move Freescale IFC driver to a common driver   Scott Wood
• [U-Boot] [Patch v1 6/6] Driver/IFC: Move Freescale IFC driver to a common driver   Prabhakar Kushwaha
• [U-Boot] [Patch v1 6/6] Driver/IFC: Move Freescale IFC driver to a common driver   Scott Wood
• [U-Boot] [Patch v1 6/6] Driver/IFC: Move Freescale IFC driver to a common driver   Prabhakar Kushwaha
• [U-Boot] [PATCH v1+ 00/18] MIPS Malta board support   Paul Burton
• [U-Boot] [PATCH v1+ 00/18] MIPS Malta board support   Daniel Schwierzeck
• [U-Boot] [PATCH v10 0/4] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Pekon Gupta
• [U-Boot] [PATCH v10 0/4] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Ezequiel Garcia
• [U-Boot] [PATCH v10 0/4] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Meier, Roger
• [U-Boot] [PATCH v10 1/4] mtd: nand: omap: make am33xx/elm.c as common driver for all OMAPx and AMxxxx platforms   Pekon Gupta
• [U-Boot] [PATCH v10 2/4] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Pekon Gupta
• [U-Boot] [PATCH v10 2/4] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Scott Wood
• [U-Boot] [PATCH v10 2/4] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Gupta, Pekon
• [U-Boot] [PATCH v10 2/4] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Scott Wood
• [U-Boot] [PATCH v10 2/4] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Gupta, Pekon
• [U-Boot] [PATCH v10 3/4] mtd: nand: omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme   Pekon Gupta
• [U-Boot] [PATCH v10 4/4] am335x: fix GPMC config for NAND and NOR SPL boot   Pekon Gupta
• [U-Boot] [PATCH v10] Add dmmalloc module for DM.   Mateusz Zalega
• [U-Boot] [PATCH v10] Add dmmalloc module for DM.   Tom Rini
• [U-Boot] [PATCH v10] Add dmmalloc module for DM.   Mateusz Zalega
• [U-Boot] [PATCH v11 0/4] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Pekon Gupta
• [U-Boot] [PATCH v11 0/4] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Scott Wood
• [U-Boot] [PATCH v11 0/4] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Gupta, Pekon
• [U-Boot] [PATCH v11 1/4] mtd: nand: omap: make am33xx/elm.c as common driver for all OMAPx and AMxxxx platforms   Pekon Gupta
• [U-Boot] [PATCH v11 2/4] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Pekon Gupta
• [U-Boot] [PATCH v11 3/4] mtd: nand: omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme   Pekon Gupta
• [U-Boot] [PATCH v11 4/4] am335x: fix GPMC config for NAND and NOR SPL boot   Pekon Gupta
• [U-Boot] [PATCH v15 00/10] arm64 patch   fenghua at phytium.com.cn
• [U-Boot] [PATCH v15 01/10] fdt_support: 64bit initrd start address support   fenghua at phytium.com.cn
• [U-Boot] [PATCH v15 02/10] cmd_pxe: remove compiling warnings   fenghua at phytium.com.cn
• [U-Boot] [PATCH v15 03/10] add weak entry definition   fenghua at phytium.com.cn
• [U-Boot] [PATCH v15 04/10] arm64: Add tool to statically apply RELA relocations   fenghua at phytium.com.cn
• [U-Boot] [PATCH v15 05/10] arm64: Turn u-boot.bin back into an ELF file after relocate-rela   fenghua at phytium.com.cn
• [U-Boot] [PATCH v15 06/10] arm64: Make checkarmreloc accept arm64 relocations   fenghua at phytium.com.cn
• [U-Boot] [PATCH v15 07/10] arm64: core support   fenghua at phytium.com.cn
• [U-Boot] [PATCH v15 07/10] arm64: core support   Bhupesh SHARMA
• [U-Boot] [PATCH v15 07/10] arm64: core support   FengHua
• [U-Boot] [PATCH v15 07/10] arm64: core support   Bhupesh Sharma
• [U-Boot] [PATCH v15 08/10] arm64: generic board support   fenghua at phytium.com.cn
• [U-Boot] [PATCH v15 09/10] arm64: board support of vexpress_aemv8a   fenghua at phytium.com.cn
• [U-Boot] [PATCH v15 10/10] arm64: MAKEALL, filter armv8 boards from LIST_arm   fenghua at phytium.com.cn
• [U-Boot] [PATCH v1] arm: keep all sections in ELF file   Albert ARIBAUD
• [U-Boot] [PATCH v1] arm: keep all sections in ELF file   Benoît Thébaudeau
• [U-Boot] [PATCH v1] patman: add Series-commit-notes tag and section   Masahiro Yamada
• [U-Boot] [PATCH v1] patman: add Series-commit-notes tag and section   Simon Glass
• [U-Boot] [PATCH V2 0/3] OMAP5/DRA7: EMIF fixes for lowpower usecases   Sricharan R
• [U-Boot] [PATCH V2 0/3] OMAP5/DRA7: EMIF fixes for lowpower usecases   Sricharan R
• [U-Boot] [PATCH v2 0/4] arm, at91: support for the taurus, axm and corvus board   Heiko Schocher
• [U-Boot] [PATCH v2 0/4] FIT images and device tree on x86   Simon Glass
• [U-Boot] [PATCH v2 0/4] i2c: fti2c010: bug fix & new driver model   Kuo-Jung Su
• [U-Boot] [PATCH v2 0/4] udoo: Move and optimize platform register setting.   Stefano Babic
• [U-Boot] [PATCH v2 0/4] udoo: Move and optimize platform register setting.   Giuseppe Pagano
• [U-Boot] [PATCH v2 0/5] Add device tree support for VxWorks   myan
• [U-Boot] [PATCH v2 0/5] Add device tree support for VxWorks   Tom Rini
• [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards   Heiko Schocher
• [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards   Marek Vasut
• [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards   Vaibhav Bedia
• [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards   Heiko Schocher
• [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards   Vaibhav Bedia
• [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards   Vaibhav Bedia
• [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards   Heiko Schocher
• [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards   Vaibhav Bedia
• [U-Boot] [PATCH V2 0/5] i.MX6 (DQ/DLS): consolidate mux and pad names   Eric Nelson
• [U-Boot] [PATCH V2 0/5] i.MX6 (DQ/DLS): consolidate mux and pad names   Stefano Babic
• [U-Boot] [PATCH V2 0/5] i.MX6 (DQ/DLS): consolidate mux and pad names   Eric Nelson
• [U-Boot] [PATCH V2 0/5] i.MX6 (DQ/DLS): consolidate mux and pad names   Fabio Estevam
• [U-Boot] [PATCH V2 0/5] i.MX6 (DQ/DLS): consolidate mux and pad names   Fabio Estevam
• [U-Boot] [PATCH V2 0/5] i.MX6 (DQ/DLS): consolidate mux and pad names   Eric Nelson
• [U-Boot] [PATCH V2 0/5] i.MX6 (DQ/DLS): consolidate mux and pad names   Eric Nelson
• [U-Boot] [PATCH V2 0/6] Add support for SPI based DataImage LCD panel   Tom Rini
• [U-Boot] [PATCH V2 0/6] Add support for SPI based DataImage LCD panel   Nikita Kiryanov
• [U-Boot] [PATCH V2 0/6] Add support for SPI based DataImage LCD panel   Anatolij Gustschin
• [U-Boot] [PATCH V2 0/6] Add support for SPI based DataImage LCD panel   Nikita Kiryanov
• [U-Boot] [PATCH v2 0/7] arm: atmel: sama5d3: enable spl boot from SD card   Bo Shen
• [U-Boot] [PATCH V2 0/7] SMDK5420: Add support for FIMD and DP   Ajay Kumar
• [U-Boot] [PATCH v2 0/8] SATA support for omap5_uevm and dra7_evm   Roger Quadros
• [U-Boot] [PATCH v2 0/8] SATA support for omap5_uevm and dra7_evm   Tom Rini
• [U-Boot] [PATCH v2 0/9] Consolidate timer code   Tom Rini
• [U-Boot] [PATCH v2 0/9] Pending patches for merging   Otavio Salvador
• [U-Boot] [PATCH V2 00/14] ARM: AM43xx: Update support for AM4372 SoC   Lokesh Vutla
• [U-Boot] [PATCH V2 01/14] ARM: AM43xx: Update the base addresses of modules   Vaibhav Bedia
• [U-Boot] [PATCH V2 01/14] ARM: AM43xx: Update the base addresses of modules   Lokesh Vutla
• [U-Boot] [PATCH V2 01/14] ARM: AM43xx: Update the base addresses of modules   Lokesh Vutla
• [U-Boot] [PATCH v2 01/18] mips32: detect L1 cache sizes if they're not defined   Paul Burton
• [U-Boot] [PATCH V2 02/14] ARM: AM43xx: Adapt to ti_armv7_common.h config file   Lokesh Vutla
• [U-Boot] [PATCH v2 02/18] pcnet: code style cleanup   Paul Burton
• [U-Boot] [PATCH V2 03/14] ARM: AM43xx: Add L2 Support   Lokesh Vutla
• [U-Boot] [PATCH v2 03/18] pcnet: s/le16_to_cpu/cpu_to_le16/ in pcnet_send   Paul Burton
• [U-Boot] [PATCH V2 04/14] ARM: AM43xx: Add extra ENV settings   Lokesh Vutla
• [U-Boot] [PATCH v2 04/18] pcnet: add cache flushing & invalidation   Paul Burton
• [U-Boot] [PATCH V2 05/14] ARM: AM43XX: board: add support for reading onboard EEPROM   Lokesh Vutla
• [U-Boot] [PATCH V2 05/14] ARM: AM43XX: board: add support for reading onboard EEPROM   Vaibhav Bedia
• [U-Boot] [PATCH V2 05/14] ARM: AM43XX: board: add support for reading onboard EEPROM   Lokesh Vutla
• [U-Boot] [PATCH V2 05/14] ARM: AM43XX: board: add support for reading onboard EEPROM   Vaibhav Bedia
• [U-Boot] [PATCH v2 05/18] pcnet: enable the NOUFLO feature   Paul Burton
• [U-Boot] [PATCH v2 05/18] pcnet: enable the NOUFLO feature   Marek Vasut
• [U-Boot] [PATCH v2 05/18] pcnet: enable the NOUFLO feature   Paul Burton
• [U-Boot] [PATCH v2 05/18] pcnet: enable the NOUFLO feature   Marek Vasut
• [U-Boot] [PATCH V2 06/14] ARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Lokesh Vutla
• [U-Boot] [PATCH V2 06/14] ARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Vaibhav Bedia
• [U-Boot] [PATCH V2 06/14] ARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Lokesh Vutla
• [U-Boot] [PATCH V2 06/14] ARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Vaibhav Bedia
• [U-Boot] [PATCH v2 06/18] pci.h: allow inclusion in assembly source   Paul Burton
• [U-Boot] [PATCH V2 07/14] ARM: AM43xx: Select clk source for Timer2   Vaibhav Bedia
• [U-Boot] [PATCH V2 07/14] ARM: AM43xx: Select clk source for Timer2   Lokesh Vutla
• [U-Boot] [PATCH V2 07/14] ARM: AM43xx: Select clk source for Timer2   Vaibhav Bedia
• [U-Boot] [PATCH V2 07/14] ARM: AM43xx: Select clk source for Timer2   Lokesh Vutla
• [U-Boot] [PATCH V2 08/14] ARM: AM43xx: Update Current Booting devices list   Lokesh Vutla
• [U-Boot] [PATCH V2 09/14] ARM: AM43xx: mux: Update mux data   Lokesh Vutla
• [U-Boot] [PATCH V2 09/14] ARM: AM43xx: mux: Update mux data   Vaibhav Bedia
• [U-Boot] [PATCH V2 09/14] ARM: AM43xx: mux: Update mux data   Lokesh Vutla
• [U-Boot] [PATCH V2 09/14] ARM: AM43xx: mux: Update mux data   Vaibhav Bedia
• [U-Boot] [PATCH v2 1/2] arm: make _end compiler-generated   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/2] arm: make _end compiler-generated   Benoît Thébaudeau
• [U-Boot] [PATCH V2 1/2] driver:i2c:s3c24x0: adapt driver to new i2c   Naveen Krishna Ch
• [U-Boot] [PATCH V2 1/2] driver:i2c:s3c24x0: adapt driver to new i2c   Naveen Krishna Ch
• [U-Boot] [PATCH V2 1/2] driver:i2c:s3c24x0: adapt driver to new i2c   Piotr Wilczek
• [U-Boot] [PATCH V2 1/2] driver:i2c:s3c24x0: adapt driver to new i2c   Heiko Schocher
• [U-Boot] [PATCH V2 1/2] driver:usb:s3c_udc: add support for Exynos4x12   Piotr Wilczek
• [U-Boot] [PATCH V2 1/2] driver:usb:s3c_udc: add support for Exynos4x12   Jaehoon Chung
• [U-Boot] [PATCH V2 1/2] driver:usb:s3c_udc: add support for Exynos4x12   Piotr Wilczek
• [U-Boot] [PATCH V2 1/3] ARM: DRA7: Add is_dra7xx cpu check definition   Sricharan R
• [U-Boot] [PATCH v2 1/4] at91: add defines for reset type   Heiko Schocher
• [U-Boot] [PATCH v2 1/4] at91: add defines for reset type   Andreas Bießmann
• [U-Boot] [PATCH v2 1/4] i2c: fti2c010: cosmetic: coding style cleanup   Kuo-Jung Su
• [U-Boot] [PATCH v2 1/4] udoo: Add ethernet support (FEC + Micrel KSZ9031).   Stefano Babic
• [U-Boot] [PATCH v2 1/4] udoo: Add ethernet support (FEC + Micrel KSZ9031).   Fabio Estevam
• [U-Boot] [PATCH v2 1/4] udoo: Add ethernet support (FEC + Micrel KSZ9031).   Fabio Estevam
• [U-Boot] [PATCH v2 1/4] udoo: Add ethernet support (FEC + Micrel KSZ9031).   Stefano Babic
• [U-Boot] [PATCH v2 1/4] udoo: Add ethernet support (FEC + Micrel KSZ9031).   Giuseppe Pagano
• [U-Boot] [PATCH v2 1/4] udoo: Add ethernet support (FEC + Micrel KSZ9031).   Giuseppe Pagano
• [U-Boot] [PATCH v2 1/4] udoo: Add ethernet support (FEC + Micrel KSZ9031).   Giuseppe Pagano
• [U-Boot] [PATCH v2 1/4] udoo: Add ethernet support (FEC + Micrel KSZ9031).   Giuseppe Pagano
• [U-Boot] [PATCH v2 1/4] x86: Enable LMB and RAMDISK_HIGH by default   Simon Glass
• [U-Boot] [PATCH v2 1/5] bootcount: store bootcount var in environment   Heiko Schocher
• [U-Boot] [Patch v2 1/5] Driver/DDR: Moving Freescale DDR driver to a common driver   York Sun
• [U-Boot] [Patch v2 1/5] Driver/DDR: Moving Freescale DDR driver to a common driver   Otavio Salvador
• [U-Boot] [Patch v2 1/5] Driver/DDR: Moving Freescale DDR driver to a common driver   york sun
• [U-Boot] [PATCH V2 1/5] i.MX6DQ/DLS: replace pad names with their Linux kernel equivalents   Eric Nelson
• [U-Boot] [PATCH V2 1/6] spi: omap3: remove semicolon from #define   Anatolij Gustschin
• [U-Boot] [PATCH v2 1/7] arm: atmel: sama5d3: correct the ID for DBGU and PIT   Bo Shen
• [U-Boot] [PATCH V2 1/7] exynos_fb: Remove usage of static defines   Ajay Kumar
• [U-Boot] [PATCH v2 1/8] ahci: Error out with message on malloc() failure   Roger Quadros
• [U-Boot] [PATCH v2 1/9] wandboard: add Future Eletronics 7" WVGA LCD extension board   Otavio Salvador
• [U-Boot] [PATCH V2 10/14] ARM: AM43xx: clocks: Update DPLL details for EPOS EVM   Lokesh Vutla
• [U-Boot] [PATCH V2 10/14] ARM: AM43xx: clocks: Update DPLL details for EPOS EVM   Vaibhav Bedia
• [U-Boot] [PATCH V2 10/14] ARM: AM43xx: clocks: Update DPLL details for EPOS EVM   Lokesh Vutla
• [U-Boot] [PATCH V2 10/14] ARM: AM43xx: clocks: Update DPLL details for EPOS EVM   Vaibhav Bedia
• [U-Boot] [PATCH V2 10/14] ARM: AM43xx: clocks: Update DPLL details for EPOS EVM   Lokesh Vutla
• [U-Boot] [PATCH V2 10/14] ARM: AM43xx: clocks: Update DPLL details for EPOS EVM   Vaibhav Bedia
• [U-Boot] [PATCH V2 11/14] ARM: AM43xx: clocks: Add DPLL data for GP EVM   Lokesh Vutla
• [U-Boot] [PATCH v2 11/18] malta: enable CONFIG_PCNET_79C973, PCNET_HAS_PROM, CONFIG_CMD_DHCP   Paul Burton
• [U-Boot] [PATCH V2 12/14] ARM: AM43xx: EPOS_EVM: Add support for LPDDR2   Vaibhav Bedia
• [U-Boot] [PATCH V2 12/14] ARM: AM43xx: EPOS_EVM: Add support for LPDDR2   Lokesh Vutla
• [U-Boot] [PATCH V2 12/14] ARM: AM43xx: EPOS_EVM: Add support for LPDDR2   Vaibhav Bedia
• [U-Boot] [PATCH V2 12/14] ARM: AM43xx: EPOS_EVM: Add support for LPDDR2   Lokesh Vutla
• [U-Boot] [PATCH V2 12/14] ARM: AM43xx: EPOS_EVM: Add support for LPDDR2   Lokesh Vutla
• [U-Boot] [PATCH v2 12/18] malta: remove cache size definitions   Paul Burton
• [U-Boot] [PATCH V2 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Vaibhav Bedia
• [U-Boot] [PATCH V2 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Lokesh Vutla
• [U-Boot] [PATCH V2 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Vaibhav Bedia
• [U-Boot] [PATCH V2 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Lokesh Vutla
• [U-Boot] [PATCH V2 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Vaibhav Bedia
• [U-Boot] [PATCH V2 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3   Lokesh Vutla
• [U-Boot] [PATCH V2 14/14] ARM: AM43xx: Add Maintainer   Lokesh Vutla
• [U-Boot] [PATCH v2 14/18] malta: enable RTC support   Paul Burton
• [U-Boot] [PATCH v2 2/2] arm: remove unneeded symbol offsets and _TEXT_BASE   Benoît Thébaudeau
• [U-Boot] [PATCH v2 2/2] arm: remove unneeded symbol offsets and _TEXT_BASE   Albert ARIBAUD
• [U-Boot] [PATCH V2 2/2] trats2: enable ums support on Trats2   Piotr Wilczek
• [U-Boot] [PATCH V2 2/2] trats2: enable ums support on Trats2   Jaehoon Chung
• [U-Boot] [PATCH v2 2/2] video: bcm2835: respect the pitch value   Anatolij Gustschin
• [U-Boot] [PATCH V2 2/3] ARM: DRA: EMIF: Change DDR3 settings to use hw leveling   Sricharan R
• [U-Boot] [PATCH v2 2/4] arm, at91: add function for waiting if reset ends   Heiko Schocher
• [U-Boot] [PATCH v2 2/4] arm, at91: add function for waiting if reset ends   Andreas Bießmann
• [U-Boot] [PATCH v2 2/4] arm, at91: add function for waiting if reset ends   Wolfgang Denk
• [U-Boot] [PATCH v2 2/4] arm, at91: add function for waiting if reset ends   Heiko Schocher
• [U-Boot] [PATCH v2 2/4] arm, at91: add function for waiting if reset ends   Andreas Bießmann
• [U-Boot] [PATCH v2 2/4] i2c: fti2c010: migrate to new i2c model   Kuo-Jung Su
• [U-Boot] [PATCH v2 2/4] nitrogen6x: Move setup_sata to common part   Stefano Babic
• [U-Boot] [PATCH v2 2/4] nitrogen6x: Move setup_sata to common part   Giuseppe Pagano
• [U-Boot] [PATCH v2 2/4] x86: Rewrite bootm.c to make it similar to ARM   Simon Glass
• [U-Boot] [PATCH v2 2/5] arm, am33x: make RTC32K OSC enable configurable   Heiko Schocher
• [U-Boot] [Patch v2 2/5] Driver/DDR: Add Freescale DDR driver for ARM   York Sun
• [U-Boot] [PATCH V2 2/5] i.MX6DQ/DLS: remove useless mux/pad declarations   Eric Nelson
• [U-Boot] [PATCH V2 2/6] spi: omap3: add support for more word lengths   Anatolij Gustschin
• [U-Boot] [PATCH v2 2/7] arm: atmel: sama5: correct the error define of DIV   Bo Shen
• [U-Boot] [PATCH V2 2/7] arm: exynos: Add RPLL for Exynos5420   Ajay Kumar
• [U-Boot] [PATCH v2 2/8] ahci: Fix cache align error messages   Roger Quadros
• [U-Boot] [PATCH v2 2/8] ahci: Fix cache align error messages   Tom Rini
• [U-Boot] [PATCH v2 2/8] ahci: Fix cache align error messages   Roger Quadros
• [U-Boot] [PATCH v2 2/9] wandboard: Use '0' as bootdelay but interruptable   Otavio Salvador
• [U-Boot] [PATCH v2 2/9] wandboard: Use '0' as bootdelay but interruptable   Fabio Estevam
• [U-Boot] [PATCH v2 2/9] wandboard: Use '0' as bootdelay but interruptable   Michael Trimarchi
• [U-Boot] [PATCH v2 2/9] wandboard: Use '0' as bootdelay but interruptable   Wolfgang Denk
• [U-Boot] [PATCH v2 2/9] wandboard: Use '0' as bootdelay but interruptable   Michael Trimarchi
• [U-Boot] [PATCH v2 2/9] wandboard: Use '0' as bootdelay but interruptable   Otavio Salvador
• [U-Boot] [PATCH V2 3/3] ARM: DRA7/OMAP5: EMIF: Add workaround for bug 0039   Sricharan R
• [U-Boot] [PATCH v2 3/4] arm, at91: add Siemens board taurus and axm   Andreas Bießmann
• [U-Boot] [PATCH v2 3/4] arm, at91: add Siemens board taurus and axm   Heiko Schocher
• [U-Boot] [PATCH v2 3/4] arm, at91: add Siemens board taurus and axm   Andreas Bießmann
• [U-Boot] [PATCH v2 3/4] arm, at91: add Siemens board taurus and axm   Heiko Schocher
• [U-Boot] [PATCH v2 3/4] i2c: fti2c010: serial out r/w address in MSB order   Kuo-Jung Su
• [U-Boot] [PATCH v2 3/4] udoo: Add SATA support on uDoo Board.   Giuseppe Pagano
• [U-Boot] [PATCH v2 3/4] x86: Allow cmdline setup in setup_zimage() to be optional   Simon Glass
• [U-Boot] [PATCH V2 3/5] i.MX6DQ: Add Pinmux settings that are present in mainline and Dual-Lite/Solo   Eric Nelson
• [U-Boot] [Patch v2 3/5] powerpc/mpc8xxx: Extend DDR registers' fields   York Sun
• [U-Boot] [PATCH v2 3/5] usb, g_dnl: make iSerialNumber board configurable   Heiko Schocher
• [U-Boot] [PATCH v2 3/5] usb, g_dnl: make iSerialNumber board configurable   Lukasz Majewski
• [U-Boot] [PATCH V2 3/6] spi: define SPI_XFER_ONCE   Anatolij Gustschin
• [U-Boot] [PATCH v2 3/7] arm: atmel: the offset of MULA is 18 in sama5d3   Bo Shen
• [U-Boot] [PATCH v2 3/8] ARM: OMAP5: Add Pipe3 PHY driver   Roger Quadros
• [U-Boot] [PATCH v2 3/9] wandboard: Pass 'quiet' bootparam by default   Fabio Estevam
• [U-Boot] [PATCH v2 3/9] wandboard: Pass 'quiet' bootparam by default   Otavio Salvador
• [U-Boot] [PATCH v2 4/4] arm, at91: add siemens corvus board   Heiko Schocher
• [U-Boot] [PATCH v2 4/4] arm, at91: add siemens corvus board   Andreas Bießmann
• [U-Boot] [PATCH v2 4/4] arm, at91: add siemens corvus board   Heiko Schocher
• [U-Boot] [PATCH v2 4/4] arm, at91: add siemens corvus board   Andreas Bießmann
• [U-Boot] [PATCH v2 4/4] arm, at91: add siemens corvus board   Heiko Schocher
• [U-Boot] [PATCH v2 4/4] arm, at91: add siemens corvus board   Andreas Bießmann
• [U-Boot] [PATCH v2 4/4] cmd_eeprom: bug fix for i2c read/write   Kuo-Jung Su
• [U-Boot] [PATCH v2 4/4] cmd_eeprom: bug fix for i2c read/write   Alexey Brodkin
• [U-Boot] [PATCH v2 4/4] cmd_eeprom: bug fix for i2c read/write   Kuo-Jung Su
• [U-Boot] [PATCH v2 4/4] cmd_eeprom: bug fix for i2c read/write   Alexey Brodkin
• [U-Boot] [PATCH v2 4/4] cmd_eeprom: bug fix for i2c read/write   Kuo-Jung Su
• [U-Boot] [PATCH v2 4/4] cmd_eeprom: bug fix for i2c read/write   Alexey Brodkin
• [U-Boot] [PATCH v2 4/4] cmd_eeprom: bug fix for i2c read/write   Kuo-Jung Su
• [U-Boot] [PATCH v2 4/4] udoo: Fix watchdog during kernel boot.   Giuseppe Pagano
• [U-Boot] [PATCH v2 4/4] udoo: Fix watchdog during kernel boot.   Stefano Babic
• [U-Boot] [PATCH v2 4/4] x86: Support loading kernel setup from a FIT   Simon Glass
• [U-Boot] [Patch v2 4/5] Driver/DDR: Update DDR driver to allow non-zero base address   York Sun
• [U-Boot] [PATCH V2 4/5] i.MX6DQ/DLS: remove unused pad declarations   Eric Nelson
• [U-Boot] [PATCH v2 4/5] usb, g_dnl: make bcdDevice value configurable   Heiko Schocher
• [U-Boot] [PATCH V2 4/6] lcd: add DataImage SCF0403x LCD panel support   Anatolij Gustschin
• [U-Boot] [PATCH v2 4/7] arm: atmel: sama5d3: early enable PIO peripherals   Bo Shen
• [U-Boot] [PATCH v2 4/7] arm: atmel: sama5d3: early enable PIO peripherals   Bo Shen
• [U-Boot] [PATCH V2 4/7] video: exynos_fimd: Add framework to disable FIMD sysmmu   Ajay Kumar
• [U-Boot] [PATCH v2 4/8] ARM: OMAP5: Add PRCM and Control information for SATA   Roger Quadros
• [U-Boot] [PATCH v2 4/9] mx6sabresd: Add eMMC specific environment to allow U-Boot update   Otavio Salvador
• [U-Boot] [PATCH v2 5/5] arm, am335x: update for the siemens boards   Heiko Schocher
• [U-Boot] [Patch v2 5/5] Driver/IFC: Move Freescale IFC driver to a common driver   York Sun
• [U-Boot] [PATCH V2 5/5] i.MX6DQ/DLS: whitespace: Align IOMUX_PAD column in declarations   Eric Nelson
• [U-Boot] [PATCH V2 5/6] omap3_dss: define DSS_ONOFF   Anatolij Gustschin
• [U-Boot] [PATCH v2 5/7] arm: atmel: add plla and mck initialize function   Bo Shen
• [U-Boot] [PATCH V2 5/7] smdk5420: Implement callbacks needed by exynos_fb driver   Ajay Kumar
• [U-Boot] [PATCH v2 5/8] ARM: OMAP5: Add SATA platform glue   Roger Quadros
• [U-Boot] [PATCH v2 5/9] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro   Otavio Salvador
• [U-Boot] [PATCH V2 6/6] cm_t35: use scf0403 driver   Anatolij Gustschin
• [U-Boot] [PATCH v2 6/7] arm: atmel: add ddr2 initialization function   Bo Shen
• [U-Boot] [PATCH V2 6/7] exynos: s2mps11_pmic: Enable LDO38 for SMDK5420   Ajay Kumar
• [U-Boot] [PATCH v2 6/8] ARM: omap5_uevm: Add SATA support   Roger Quadros
• [U-Boot] [PATCH v2 6/9] mx28evk: Use 512k for fdt partition to align it   Otavio Salvador
• [U-Boot] [PATCH V2 7/7] CONFIG: SMDK5420: Enable FIMD and DP   Ajay Kumar
• [U-Boot] [PATCH v2 7/7] spl: mmc: FAT support boot u-boot   Bo Shen
• [U-Boot] [PATCH v2 7/7] spl: mmc: FAT support boot u-boot   Wolfgang Denk
• [U-Boot] [PATCH v2 7/7] spl: mmc: FAT support boot u-boot   Bo Shen
• [U-Boot] [PATCH v2 7/8] ARM: DRA7xx: Add PRCM and Control information for SATA   Roger Quadros
• [U-Boot] [PATCH v2 7/9] mx28evk: Add 'nandboot' environment command   Otavio Salvador
• [U-Boot] [PATCH v2 8/8] ARM: dra7_evm: Add SATA support   Roger Quadros
• [U-Boot] [PATCH v2 8/9] mx28evk: Extend environment to easy write of NAND system   Otavio Salvador
• [U-Boot] [PATCH v2 9/9] ARM: mx6: Change the FDT loading address to avoid overlaping   Otavio Salvador
• [U-Boot] [PATCH v2] .gitignore: ignore spl/ and tpl/ directories except spl/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v2] arm926ejs, at91: add common phy_reset function   esw at bus-elektronik.de
• [U-Boot] [PATCH v2] arm926ejs, at91: add common phy_reset function   Heiko Schocher
• [U-Boot] [PATCH v2] arm926ejs, at91: add common phy_reset function   Bo Shen
• [U-Boot] [PATCH v2] arm926ejs, at91: add common phy_reset function   Heiko Schocher
• [U-Boot] [PATCH v2] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Mateusz Kulikowski
• [U-Boot] [PATCH v2] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Andreas Bießmann
• [U-Boot] [PATCH v2] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Heiko Schocher
• [U-Boot] [PATCH v2] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Mateusz Kulikowski
• [U-Boot] [PATCH v2] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Andreas Bießmann
• [U-Boot] [PATCH V2] arm: omap3: Enable clocks for peripherals only if they are used   Michael Trimarchi
• [U-Boot] [PATCH V2] arm: omap: i2c: don't zero cnt in i2c_write   Nikita Kiryanov
• [U-Boot] [PATCH V2] arm: omap: i2c: don't zero cnt in i2c_write   Enric Balletbo Serra
• [U-Boot] [PATCH V2] arm: omap: i2c: don't zero cnt in i2c_write   Lubomir Popov
• [U-Boot] [PATCH V2] buildman: make board selector argument a regex   Simon Glass
• [U-Boot] [PATCH v2] common/cmd_bootm.c: fix subcommand processing in OS specific do_bootm_xxx() functions   myan
• [U-Boot] [PATCH v2] configs: clean up unused macro CONFIG_L2_OFF   Masahiro Yamada
• [U-Boot] [PATCH v2] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards   Fabio Estevam
• [U-Boot] [PATCH v2] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards   Fabio Estevam
• [U-Boot] [PATCH v2] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards   Stefano Babic
• [U-Boot] [PATCH v2] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards   Stefano Babic
• [U-Boot] [PATCH v2] dwmmc: make driver usable for non-exynos platforms   Alexey Brodkin
• [U-Boot] [PATCH v2] dwmmc: make driver usable for non-exynos platforms   Jaehoon Chung
• [U-Boot] [PATCH v2] dwmmc: make driver usable for non-exynos platforms   Alexey Brodkin
• [U-Boot] [PATCH v2] dwmmc: make driver usable for non-exynos platforms   Pantelis Antoniou
• [U-Boot] [PATCH v2] dwmmc: make driver usable for non-exynos platforms   Alexey Brodkin
• [U-Boot] [PATCH V2] i2c: mxs_i2c: Squash endless loop   Marek Vasut
• [U-Boot] [PATCH V2] imx: Define common routines to set cpu and board environment variables   Eric Nelson
• [U-Boot] [PATCH V2] imx: Define common routines to set cpu and board environment variables   Marek Vasut
• [U-Boot] [PATCH V2] imx: Define common routines to set cpu and board environment variables   Marek Vasut
• [U-Boot] [PATCH V2] imx: Define common routines to set cpu and board environment variables   Marek Vasut
• [U-Boot] [PATCH V2] imx: Define common routines to set cpu and board environment variables   Eric Nelson
• [U-Boot] [PATCH V2] imx: Define common routines to set cpu and board environment variables   Eric Nelson
• [U-Boot] [PATCH V2] imx: Define common routines to set cpu and board environment variables   Tom Rini
• [U-Boot] [PATCH V2] imx: Define common routines to set cpu and board environment variables   Fabio Estevam
• [U-Boot] [PATCH V2] imx: Define common routines to set cpu and board environment variables   Eric Nelson
• [U-Boot] [PATCH V2] imx: Define common routines to set cpu and board environment variables   Eric Nelson
• [U-Boot] [PATCH v2] include: define bool type in the same way as Linux   Wolfgang Denk
• [U-Boot] [PATCH v2] include: define bool type in the same way as Linux   Masahiro Yamada
• [U-Boot] [PATCH v2] MAKEALL: add -b (--board) option   Masahiro Yamada
• [U-Boot] [PATCH v2] Makefile: descend into subdirectories only when CONFIG_API is defined   Masahiro Yamada
• [U-Boot] [PATCH v2] Makefile: do not create a symbolic link to arch/${ARCH}/include/asm   Masahiro Yamada
• [U-Boot] [PATCH v2] malta: use unmapped flash base address   Gabor Juhos
• [U-Boot] [PATCH v2] malta: use unmapped flash base address   Daniel Schwierzeck
• [U-Boot] [PATCH v2] mmc/dwmmc: modify FIFO threshold only if value explicitly set   Alexey Brodkin
• [U-Boot] [PATCH v2] mmc/dwmmc: modify FIFO threshold only if value explicitly set   Jaehoon Chung
• [U-Boot] [PATCH v2] mpc85xx: Fix the offset of register address error   York Sun
• [U-Boot] [PATCH v2] mtd: move & update nand_ecclayout structure (plus tricorder change)   Scott Wood
• [U-Boot] [PATCH v2] mx6sabresd: Fix wrong colors in LVDS splash   Fabio Estevam
• [U-Boot] [PATCH v2] mx6sabresd: Fix wrong colors in LVDS splash   Stefano Babic
• [U-Boot] [PATCH v2] net: Add fixed phy driver   Joe Hershberger
• [U-Boot] [PATCH v2] patman: add Commit-notes tag and section   Albert ARIBAUD
• [U-Boot] [PATCH v2] patman: add Commit-notes tag and section   Simon Glass
• [U-Boot] [PATCH V2] trats2: enable dfu and thor protocol for Tizen download   Piotr Wilczek
• [U-Boot] [PATCH v2] usb: dfu: make nand upload working   Bo Shen
• [U-Boot] [PATCH v2] usb: dfu: make nand upload working   Heiko Schocher
• [U-Boot] [PATCH v2] usb: dfu: make nand upload working   Lukasz Majewski
• [U-Boot] [PATCH v2] usb: dfu: make nand upload working   Marek Vasut
• [U-Boot] [PATCH v2] usb: dfu: make nand upload working   Heiko Schocher
• [U-Boot] [PATCH v2] usb: dfu: make nand upload working   Bo Shen
• [U-Boot] [PATCH v2] usb: dfu: make nand upload working   Marek Vasut
• [U-Boot] [PATCH v3 0/1] nitrogen6x: Move setup_sata to common part   Stefano Babic
• [U-Boot] [PATCH v3 0/1] nitrogen6x: Move setup_sata to common part   Giuseppe Pagano
• [U-Boot] [PATCH v3 0/1] nitrogen6x: Move setup_sata to common part   Stefano Babic
• [U-Boot] [PATCH v3 0/1] nitrogen6x: Move setup_sata to common part   Giuseppe Pagano
• [U-Boot] [PATCH v3 0/3] Consolidate CONFIG_SYS_HZ definition   Tom Rini
• [U-Boot] [PATCH v3 0/5] arm, am33xx: update for the am33xx based siemens boards   Heiko Schocher
• [U-Boot] [PATCH V3 0/5] imx: Define common routines to set cpu and board environment variables   Eric Nelson
• [U-Boot] [PATCH v3 0/6] arm: atmel: sama5d3: enable spl boot from SD card   Bo Shen
• [U-Boot] [PATCH V3 0/6] SMDK5420: Add S2MPS11 pmic support to SMDK5420   Leela Krishna Amudala
• [U-Boot] [PATCH v3 0/8] SATA support for omap5_uevm and dra7_evm   Roger Quadros
• [U-Boot] [PATCH v3 0/8] SATA support for omap5_uevm and dra7_evm   Enric Balletbo Serra
• [U-Boot] [PATCH v3 00/19] First step towards Kbuild: Use Kbuild style makefiles   Masahiro Yamada
• [U-Boot] [PATCH v3 00/19] First step towards Kbuild: Use Kbuild style makefiles   Tom Rini
• [U-Boot] [PATCH v3 08/18] malta: setup super I/O UARTs   Paul Burton
• [U-Boot] [PATCH v3 08/18] malta: setup super I/O UARTs   Marek Vasut
• [U-Boot] [PATCH v3 08/18] malta: setup super I/O UARTs   Paul Burton
• [U-Boot] [PATCH v3 08/18] malta: setup super I/O UARTs   Marek Vasut
• [U-Boot] [PATCH v3 09/18] malta: support for coreFPGA6 boards   Paul Burton
• [U-Boot] [PATCH v3 09/18] malta: support for coreFPGA6 boards   Marek Vasut
• [U-Boot] [PATCH v3 09/18] malta: support for coreFPGA6 boards   Paul Burton
• [U-Boot] [PATCH v3 09/18] malta: support for coreFPGA6 boards   Daniel Schwierzeck
• [U-Boot] [PATCH v3 1/1] udoo: Add SATA support on uDoo Board.   Giuseppe Pagano
• [U-Boot] [PATCH V3 1/2] driver:usb:s3c_udc: add support for Exynos4x12   Piotr Wilczek
• [U-Boot] [PATCH V3 1/2] driver:usb:s3c_udc: add support for Exynos4x12   Minkyu Kang
• [U-Boot] [PATCH V3 1/2] driver:usb:s3c_udc: add support for Exynos4x12   Piotr Wilczek
• [U-Boot] [PATCH V3 1/2] driver:usb:s3c_udc: add support for Exynos4x12   Minkyu Kang
• [U-Boot] [PATCH v3 1/5] bootcount: store bootcount var in environment   Heiko Schocher
• [U-Boot] [PATCH v3 1/5] common/cmd_bootm.c: seperate do_bootm_vxworks related code from CONFIG_CMD_ELF.   myan
• [U-Boot] [PATCH V3 1/5] i.MX5x: define cpu_type() to return processor portion of cpu rev.   Eric Nelson
• [U-Boot] [PATCH V3 1/5] i.MX5x: define cpu_type() to return processor portion of cpu rev.   Marek Vasut
• [U-Boot] [PATCH V3 1/5] i.MX5x: define cpu_type() to return processor portion of cpu rev.   Stefano Babic
• [U-Boot] [PATCH V3 1/5] i.MX5x: define cpu_type() to return processor portion of cpu rev.   Eric Nelson
• [U-Boot] [PATCH V3 1/5] i.MX5x: define cpu_type() to return processor portion of cpu rev.   Stefano Babic
• [U-Boot] [PATCH v3 1/6] arm: atmel: sama5d3: correct the ID for DBGU and PIT   Bo Shen
• [U-Boot] [PATCH v3 1/6] arm: atmel: sama5d3: correct the ID for DBGU and PIT   Andreas Bießmann
• [U-Boot] [Patch v3 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver   York Sun
• [U-Boot] [Patch v3 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver   York Sun
• [U-Boot] [PATCH V3 1/6] exynos: Use common pmic_reg_update() definition   Leela Krishna Amudala
• [U-Boot] [PATCH v3 1/8] ahci: Error out with message on malloc() failure   Roger Quadros
• [U-Boot] [PATCH v3 10/18] malta: display "U-boot" on the LCD screen   Marek Vasut
• [U-Boot] [PATCH v3 10/18] malta: display "U-boot" on the LCD screen   Marek Vasut
• [U-Boot] [PATCH v3 10/18] malta: display "U-boot" on the LCD screen   Paul Burton
• [U-Boot] [PATCH v3 10/18] malta: display "U-boot" on the LCD screen   Paul Burton
• [U-Boot] [PATCH v3 13/18] malta: disable L2 caches   Paul Burton
• [U-Boot] [PATCH v3 17/18] malta: add script & instructions to flash U-boot   Paul Burton
• [U-Boot] [PATCH v3 18/18] malta: add myself to maintainers   Paul Burton
• [U-Boot] [PATCH V3 2/2] trats2: enable ums support on Trats2   Piotr Wilczek
• [U-Boot] [PATCH V3 2/2] trats2: enable ums support on Trats2   Minkyu Kang
• [U-Boot] [PATCH V3 2/2] trats2: enable ums support on Trats2   Piotr Wilczek
• [U-Boot] [PATCH v3 2/2] video: bcm2835: respect the pitch value   Anatolij Gustschin
• [U-Boot] [PATCH v3 2/2] video: bcm2835: respect the pitch value   Andre Heider
• [U-Boot] [PATCH v3 2/2] video: bcm2835: respect the pitch value   Stephen Warren
• [U-Boot] [PATCH v3 2/2] video: bcm2835: respect the pitch value   Anatolij Gustschin
• [U-Boot] [PATCH v3 2/2] video: bcm2835: respect the pitch value   Anatolij Gustschin
• [U-Boot] [PATCH v3 2/5] arm, am33x: make RTC32K OSC enable configurable   Heiko Schocher
• [U-Boot] [PATCH v3 2/5] common/config_defaults.h: make CONFIG_BOOTM_VXWORKS default configuration   myan
• [U-Boot] [PATCH v3 2/6] arm: atmel: sama5d3: correct the error define of DIV   Bo Shen
• [U-Boot] [PATCH v3 2/6] arm: atmel: sama5d3: correct the error define of DIV   Andreas Bießmann
• [U-Boot] [PATCH v3 2/6] arm: atmel: sama5d3: correct the error define of DIV   Bo Shen
• [U-Boot] [Patch v3 2/6] Driver/DDR: combine ccsr_ddr for 83xx, 85xx and 86xx   York Sun
• [U-Boot] [Patch v3 2/6] Driver/DDR: combine ccsr_ddr for 83xx, 85xx and 86xx   York Sun
• [U-Boot] [PATCH V3 2/6] power: Explicitly select pmic device's bus   Leela Krishna Amudala
• [U-Boot] [PATCH v3 2/8] ahci: Fix cache align error messages   Roger Quadros
• [U-Boot] [PATCH v3 3/5] common/cmd_bootm: extend do_bootm_vxworks to support the new VxWorks boot interface.   myan
• [U-Boot] [PATCH v3 3/5] usb, g_dnl: make iSerialNumber board configurable   Heiko Schocher
• [U-Boot] [PATCH v3 3/5] usb, g_dnl: make iSerialNumber board configurable   Lukasz Majewski
• [U-Boot] [PATCH v3 3/5] usb, g_dnl: make iSerialNumber board configurable   Heiko Schocher
• [U-Boot] [PATCH v3 3/5] usb, g_dnl: make iSerialNumber board configurable   Marek Vasut
• [U-Boot] [PATCH v3 3/5] usb, g_dnl: make iSerialNumber board configurable   Lukasz Majewski
• [U-Boot] [PATCH v3 3/5] usb, g_dnl: make iSerialNumber board configurable   Marek Vasut
• [U-Boot] [PATCH v3 3/5] usb, g_dnl: make iSerialNumber board configurable   Lukasz Majewski
• [U-Boot] [PATCH v3 3/6] arm: atmel: sama5d3: the offset of MULA is 18   Andreas Bießmann
• [U-Boot] [PATCH v3 3/6] arm: atmel: sama5d3: the offset of MULA is 18   Bo Shen
• [U-Boot] [Patch v3 3/6] Driver/DDR: Add Freescale DDR driver for ARM   York Sun
• [U-Boot] [Patch v3 3/6] Driver/DDR: Add Freescale DDR driver for ARM   York Sun
• [U-Boot] [PATCH V3 3/6] FDT: Exynos5420: Add compatible srings for PMIC   Leela Krishna Amudala
• [U-Boot] [PATCH V3 3/7] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420   Ajay Kumar
• [U-Boot] [PATCH v3 3/8] ARM: OMAP5: Add Pipe3 PHY driver   Roger Quadros
• [U-Boot] [PATCH v3 4/5] common/fdt_support.c: avoid unintended return from fdt_fixup_memory_banks()   myan
• [U-Boot] [PATCH v3 4/5] usb, g_dnl: make bcdDevice value configurable   Heiko Schocher
• [U-Boot] [PATCH v3 4/6] arm: atmel: sama5d3: early enable PIO peripherals   Bo Shen
• [U-Boot] [PATCH v3 4/6] arm: atmel: sama5d3: early enable PIO peripherals   Andreas Bießmann
• [U-Boot] [Patch v3 4/6] powerpc/mpc8xxx: Extend DDR registers' fields   York Sun
• [U-Boot] [Patch v3 4/6] powerpc/mpc8xxx: Extend DDR registers' fields   York Sun
• [U-Boot] [PATCH V3 4/6] SMDK5420: S2MPS11: Adds the register settings for S2MPS11   Leela Krishna Amudala
• [U-Boot] [PATCH v3 4/8] ARM: OMAP5: Add PRCM and Control information for SATA   Roger Quadros
• [U-Boot] [PATCH v3 5/5] arm, am335x: update for the siemens boards   Heiko Schocher
• [U-Boot] [PATCH v3 5/5] README.vxworks: add a document describing the new VxWorks boot interface   myan
• [U-Boot] [PATCH v3 5/6] arm: atmel: add ddr2 initialization function   Andreas Bießmann
• [U-Boot] [PATCH v3 5/6] arm: atmel: add ddr2 initialization function   Bo Shen
• [U-Boot] [PATCH v3 5/6] arm: atmel: add ddr2 initialization function   Andreas Bießmann
• [U-Boot] [PATCH v3 5/6] arm: atmel: add ddr2 initialization function   Bo Shen
• [U-Boot] [PATCH v3 5/6] arm: atmel: add ddr2 initialization function   Bo Shen
• [U-Boot] [Patch v3 5/6] Driver/DDR: Update DDR driver to allow non-zero base address   York Sun
• [U-Boot] [Patch v3 5/6] Driver/DDR: Update DDR driver to allow non-zero base address   York Sun
• [U-Boot] [PATCH V3 5/6] exynos: Add a common DT based PMIC driver initialization   Leela Krishna Amudala
• [U-Boot] [PATCH v3 5/8] ARM: OMAP5: Add SATA platform glue   Roger Quadros
• [U-Boot] [PATCH v3 6/6] arm: atmel: sama5d3: spl boot from fat fs SD card   Andreas Bießmann
• [U-Boot] [PATCH v3 6/6] arm: atmel: sama5d3: spl boot from fat fs SD card   Heiko Schocher
• [U-Boot] [PATCH v3 6/6] arm: atmel: sama5d3: spl boot from fat fs SD card   Bo Shen
• [U-Boot] [PATCH v3 6/6] arm: atmel: sama5d3: spl boot from fat fs SD card   Andreas Bießmann
• [U-Boot] [PATCH v3 6/6] arm: atmel: sama5d3: spl boot from fat fs SD card   Bo Shen
• [U-Boot] [PATCH v3 6/6] arm: atmel: sama5d3: spl boot from fat fs SD card   Andreas Bießmann
• [U-Boot] [PATCH V3 6/6] config: SMDK5420: Enable S2MPS11 pmic   Leela Krishna Amudala
• [U-Boot] [Patch v3 6/6] Driver/IFC: Move Freescale IFC driver to a common driver   York Sun
• [U-Boot] [Patch v3 6/6] Driver/IFC: Move Freescale IFC driver to a common driver   York Sun
• [U-Boot] [PATCH v3 6/8] ARM: omap5_uevm: Add SATA support   Roger Quadros
• [U-Boot] [PATCH v3 7/8] ARM: DRA7xx: Add PRCM and Control information for SATA   Roger Quadros
• [U-Boot] [PATCH v3 8/8] ARM: dra7_evm: Add SATA support   Roger Quadros
• [U-Boot] [PATCH v3] mtd: move & update nand_ecclayout structure (plus board changes)   Scott Wood
• [U-Boot] [PATCH v3] mtd: move & update nand_ecclayout structure (plus board changes)   Stefan Roese
• [U-Boot] [PATCH v3] mtd: move & update nand_ecclayout structure (plus board changes)   Tom Rini
• [U-Boot] [PATCH v3] powerpc/c29xpcie: Getting DDR SPD image from 16-bit sub-address EEPROM   Po Liu
• [U-Boot] [PATCH v4 0/1] nitrogen6x: Move setup_sata to common part   Giuseppe Pagano
• [U-Boot] [PATCH v4 0/3] ARM: tegra: Add the Tamonten-NG Evaluation carrier boards   Alban Bedel
• [U-Boot] [PATCH v4 0/6] Second step towards Kbuild: Descend down like Kbuild   Tom Rini
• [U-Boot] [PATCH v4 0/7] arm: atmel: sama5d3: enable spl boot from SD card   Bo Shen
• [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere   Wolfgang Denk
• [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere   Simon Glass
• [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere   Wolfgang Denk
• [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere   Stefan Roese
• [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere   Albert ARIBAUD
• [U-Boot] [PATCH v4 07/18] qemu-malta: rename to just "malta"   Paul Burton
• [U-Boot] [PATCH v4 07/18] qemu-malta: rename to just "malta"   Daniel Schwierzeck
• [U-Boot] [PATCH v4 1/1] udoo: Add SATA support on uDoo Board.   Giuseppe Pagano
• [U-Boot] [PATCH V4 1/2] driver:usb:s3c_udc: add support for Exynos4x12   Piotr Wilczek
• [U-Boot] [PATCH v4 1/3] ARM: tegra: support SKU b1 of Tegra30   Alban Bedel
• [U-Boot] [PATCH v4 1/7] arm: atmel: sama5d3: correct the ID for DBGU and PIT   Bo Shen
• [U-Boot] [PATCH v4 1/8] Implement autoconf header file   Marek Vasut
• [U-Boot] [PATCH V4 2/2] trats2: enable ums support on Trats2   Piotr Wilczek
• [U-Boot] [PATCH v4 2/3] i2c: tegra: Add the fifth bus on SoC with more than 4 buses   Alban Bedel
• [U-Boot] [PATCH v4 2/3] i2c: tegra: Add the fifth bus on SoC with more than 4 buses   Heiko Schocher
• [U-Boot] [PATCH v4 2/7] arm: at91: pm9261: remove undefined bit in mckr   Bo Shen
• [U-Boot] [PATCH v4 3/3] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board   Alban Bedel
• [U-Boot] [PATCH v4 3/3] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board   Stephen Warren
• [U-Boot] [PATCH v4 3/7] arm: atmel: sama5d3: correct the error define of DIV   Bo Shen
• [U-Boot] [PATCH v4 4/7] arm: atmel: sama5d3: the offset of MULA is 18   Bo Shen
• [U-Boot] [PATCH v4 5/7] arm: atmel: sama5d3: early enable PIO peripherals   Bo Shen
• [U-Boot] [PATCH v4 6/7] arm: atmel: add ddr2 initialization function   Bo Shen
• [U-Boot] [PATCH v4 7/7] arm: atmel: sama5d3: spl boot from fat fs SD card   Bo Shen
• [U-Boot] [PATCH v4] arm: omap3: Add SPL support to cm_t35   Stefan Roese
• [U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework   Heiko Schocher
• [U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework   Tom Rini
• [U-Boot] [PATCH v4] powerpc/p1010rdb: update readme for p1010rdb-pa and p1010rdb-pb   york sun
• [U-Boot] [PATCH v5 06/16] dm: Add README for driver model   Simon Glass
• [U-Boot] [PATCH v5 06/16] dm: Add README for driver model   Marek Vasut
• [U-Boot] [PATCH v5 06/16] dm: Add README for driver model   Pavel Herrmann
• [U-Boot] [PATCH v5 07/18] qemu-malta: rename to just "malta"   Paul Burton
• [U-Boot] [PATCH v5 07/18] qemu-malta: rename to just "malta"   Marek Vasut
• [U-Boot] [PATCH v5 07/18] qemu-malta: rename to just "malta"   Paul Burton
• [U-Boot] [PATCH v5 07/18] qemu-malta: rename to just "malta"   Marek Vasut
• [U-Boot] [PATCH v5 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114   Andreas Müller
• [U-Boot] [PATCH v5 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114   Stephen Warren
• [U-Boot] [PATCH v5] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board   Alban Bedel
• [U-Boot] [PATCH v5] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board   Stephen Warren
• [U-Boot] [PATCH v5] spi: ftssp010_spi: add Faraday SPI controller support   Kuo-Jung Su
• [U-Boot] [PATCH v6 0/17] Driver model implementation, tests, demo and GPIO   Simon Glass
• [U-Boot] [PATCH v6 0/17] Driver model implementation, tests, demo and GPIO   Simon Glass
• [U-Boot] [PATCH v6 01/17] sandbox: Add timer_read_counter() to avoid link error   Simon Glass
• [U-Boot] [PATCH v6 02/17] sandbox: Make map_to_sysmem() use a constant pointer   Simon Glass
• [U-Boot] [PATCH v6 03/17] sandbox: Correct data sizes and printf() strings in fdtdec.c   Simon Glass
• [U-Boot] [PATCH v6 04/17] sandbox: config: Don't use 64-bit physical memory   Simon Glass
• [U-Boot] [PATCH v6 05/17] sandbox: Build a device tree file for sandbox   Simon Glass
• [U-Boot] [PATCH v6 06/17] Add cmd_process_error() to report and process errors   Simon Glass
• [U-Boot] [PATCH v6 07/17] dm: Add README for driver model   Simon Glass
• [U-Boot] [PATCH v6 07/17] dm: Add README for driver model   Gerhard Sittig
• [U-Boot] [PATCH v6 07/17] dm: Add README for driver model   Gerhard Sittig
• [U-Boot] [PATCH v6 08/17] dm: Add base driver model support   Simon Glass
• [U-Boot] [PATCH v6 09/17] sandbox: config: Enable driver model   Simon Glass
• [U-Boot] [PATCH v6 10/17] dm: Set up driver model after relocation   Simon Glass
• [U-Boot] [PATCH v6 11/17] dm: Add basic tests   Simon Glass
• [U-Boot] [PATCH v6 12/17] dm: Add a 'dm' command for testing   Simon Glass
• [U-Boot] [PATCH v6 13/17] dm: Add a demonstration/example driver   Simon Glass
• [U-Boot] [PATCH v6 14/17] dm: Add GPIO support and tests   Simon Glass
• [U-Boot] [PATCH v6 14/17] dm: Add GPIO support and tests   Mateusz Zalega
• [U-Boot] [PATCH v6 14/17] dm: Add GPIO support and tests   Simon Glass
• [U-Boot] [PATCH v6 15/17] sandbox: Convert GPIOs to use driver model   Simon Glass
• [U-Boot] [PATCH v6 16/17] dm: Enable gpio command to support driver model   Simon Glass
• [U-Boot] [PATCH v6 17/17] dm: Remove old driver model documentation   Simon Glass
• [U-Boot] [PATCH v6] spi: ftssp010_spi: add Faraday SPI controller support   Kuo-Jung Su
• [U-Boot] [PATCH v7 0/13] Driver model implementation, tests, demo and GPIO   Simon Glass
• [U-Boot] [PATCH v7 0/13] Driver model implementation, tests, demo and GPIO   Masahiro Yamada
• [U-Boot] [PATCH v7 0/13] Driver model implementation, tests, demo and GPIO   Marek Vasut
• [U-Boot] [PATCH v7 01/13] sandbox: Build a device tree file for sandbox   Simon Glass
• [U-Boot] [PATCH v7 02/13] Add cmd_process_error() to report and process errors   Simon Glass
• [U-Boot] [PATCH v7 03/13] dm: Add README for driver model   Simon Glass
• [U-Boot] [PATCH v7 04/13] dm: Add base driver model support   Simon Glass
• [U-Boot] [PATCH v7 05/13] sandbox: config: Enable driver model   Simon Glass
• [U-Boot] [PATCH v7 06/13] dm: Set up driver model after relocation   Simon Glass
• [U-Boot] [PATCH v7 07/13] dm: Add basic tests   Simon Glass
• [U-Boot] [PATCH v7 08/13] dm: Add a 'dm' command for testing   Simon Glass
• [U-Boot] [PATCH v7 09/13] dm: Add a demonstration/example driver   Simon Glass
• [U-Boot] [PATCH v7 10/13] dm: Add GPIO support and tests   Simon Glass
• [U-Boot] [PATCH v7 11/13] sandbox: Convert GPIOs to use driver model   Simon Glass
• [U-Boot] [PATCH v7 12/13] dm: Enable gpio command to support driver model   Simon Glass
• [U-Boot] [PATCH v7 13/13] dm: Remove old driver model documentation   Simon Glass
• [U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   matti kaasinen
• [U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Gupta, Pekon
• [U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   matti kaasinen
• [U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   matti kaasinen
• [U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   matti kaasinen
• [U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Gupta, Pekon
• [U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   matti kaasinen
• [U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Gupta, Pekon
• [U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   matti kaasinen
• [U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Gupta, Pekon
• [U-Boot] [PATCH v8] nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [PATCH v9 0/4] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Pekon Gupta
• [U-Boot] [PATCH v9 0/4] mtd: nand: omap: optimize OMAP NAND driver   Abraham V.
• [U-Boot] [PATCH v9 0/4] mtd: nand: omap: optimize OMAP NAND driver   Ezequiel Garcia
• [U-Boot] [PATCH v9 0/4] mtd: nand: omap: optimize OMAP NAND driver   Pekon Gupta
• [U-Boot] [PATCH v9 0/4] mtd: nand: omap: optimize OMAP NAND driver   Gupta, Pekon
• [U-Boot] [PATCH v9 1/4] mtd: nand: omap: make am33xx/elm.c as common driver for all OMAPx and AMxxxx platforms   Pekon Gupta
• [U-Boot] [PATCH v9 1/4] mtd: nand: omap: make am33xx/elm.c as common driver for all OMAPx and AMxxxx platforms   Scott Wood
• [U-Boot] [PATCH v9 1/4] mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes   Pekon Gupta
• [U-Boot] [PATCH v9 2/4] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Pekon Gupta
• [U-Boot] [PATCH v9 2/4] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Scott Wood
• [U-Boot] [PATCH v9 2/4] mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemes   Pekon Gupta
• [U-Boot] [PATCH v9 3/4] mtd: nand: omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme   Pekon Gupta
• [U-Boot] [PATCH v9 3/4] mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes   Pekon Gupta
• [U-Boot] [PATCH v9 4/4] am335x: fix GPMC config for NAND and NOR SPL boot   Pekon Gupta
• [U-Boot] [PATCH v9 4/4] board/ti/am335x/README: update for NAND boot   Pekon Gupta
• [U-Boot] [PATCH, RESEND] Blackfin: remove executable permission of AWK script   Masahiro Yamada
• [U-Boot] [PATCH,v1,4/4] udoo: Fix watchdog during kernel boot.   Giuseppe Pagano
• [U-Boot] [PATCH,v1,4/4] udoo: Fix watchdog during kernel boot.   Fabio Estevam
• [U-Boot] [PATCH] .gitignore: ignore spl/ and tpl/ directories except spl/Makefile   Masahiro Yamada
• [U-Boot] [PATCH] Add support for TechNexion edm1-cf-imx6 SoM   Fabio Estevam
• [U-Boot] [PATCH] Add support for TechNexion edm1-cf-imx6 SoM   Eric Nelson
• [U-Boot] [PATCH] Add support for TechNexion edm1-cf-imx6 SoM   Otavio Salvador
• [U-Boot] [PATCH] Add support for TechNexion edm1-cf-imx6 SoM   Stefano Babic
• [U-Boot] [PATCH] Add support for TechNexion edm1-cf-imx6 SoM   Tapani
• [PATCH] Added rsa-sha256 support.   Andreas Oetken
• [U-Boot] [PATCH] alsa-lib: dlmisc: Add a fake dl lib head file when dl lib is not supported by the toolchain.   Sonic Zhang
• [U-Boot] [PATCH] am335x: cpsw: optimize cpsw_recv to increase network performance   Vladimir Koutny
• [U-Boot] [PATCH] am335x: cpsw: optimize cpsw_recv to increase network performance   Mugunthan V N
• [U-Boot] [PATCH] am335x_evm: Fix CONS_INDEX numbering   andrew at bradfordembedded.com
• [U-Boot] [PATCH] am335x_evm: Update nandboot to use partitions and DT   Tom Rini
• [U-Boot] [PATCH] am33xx: Make SoC bootcount driver have its own symbol   Tom Rini
• [U-Boot] [PATCH] am33xx: Make SoC bootcount driver have its own symbol   Heiko Schocher
• [U-Boot] [PATCH] am33xx: Make SoC bootcount driver have its own symbol   Tom Rini
• [U-Boot] [PATCH] am33xx: Stop modifying certain EMIF4D registers   Tom Rini
• [U-Boot] [PATCH] am33xx: Stop modifying certain EMIF4D registers   Vaibhav Bedia
• [U-Boot] [PATCH] am33xx: Stop modifying certain EMIF4D registers   Tom Rini
• [U-Boot] [PATCH] am33xx: Stop modifying certain EMIF4D registers   Matt Porter
• [U-Boot] [PATCH] am33xx: Stop modifying certain EMIF4D registers   Matt Porter
• [U-Boot] [PATCH] am33xx: Stop modifying certain EMIF4D registers   Vaibhav Bedia
• [U-Boot] [PATCH] am3517_evm: activate Ethernet PHY   yegorslists at googlemail.com
• [U-Boot] [PATCH] ARM/VExpress: fix timer address for TC2 and other VExpress models   Andre Przywara
• [U-Boot] [PATCH] ARM/VExpress: fix timer address for TC2 and other VExpress models   Ian Campbell
• [U-Boot] [PATCH] ARM: align MVBAR on 32 byte boundary   Masahiro Yamada
• [U-Boot] [PATCH] arm: am335x: Add DT (FDT) support to Siemens boards   Heiko Schocher
• [U-Boot] [PATCH] arm: am335x: Add DT (FDT) support to Siemens boards   Stefan Roese
• [U-Boot] [PATCH] ARM: at91: sama5d3: add support for sama5d36 chip   Josh Wu
• [U-Boot] [PATCH] ARM: at91: sama5d3: add support for sama5d36 chip   Bo Shen
• [U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Mateusz Kulikowski
• [U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Andreas Bießmann
• [U-Boot] [PATCH] arm: atmel: eb_cpux9k2: config clean up   Jens Scharsig (BuS Elektronik)
• [U-Boot] [PATCH] arm: atmel: sam9m10g45ek: let CONFIG_SYS_NO_FLASH at proper position   Bo Shen
• [U-Boot] [PATCH] ARM: fix the standalone programs   Jeroen Hofstee
• [U-Boot] [PATCH] ARM: imx6: Add Bachmann electronic ot1205 mr board   Wolfgang Denk
• [U-Boot] [PATCH] ARM: imx6: Add Bachmann electronic ot1205 mr board   Fabio Estevam
• [U-Boot] [PATCH] ARM: imx6: Add Bachmann electronic ot1205 mr board   Christian Gmeiner
• [U-Boot] [PATCH] ARM: imx6: Add Bachmann electronic ot1205 mr board   Eric Nelson
• [U-Boot] [PATCH] ARM: imx6: Add Bachmann electronic ot1205 mr board   Stefano Babic
• [U-Boot] [PATCH] ARM: merge commonly-defined PLATFORM_RELFLAGS   Masahiro Yamada
• [U-Boot] [PATCH] ARM: mx6: Remove the FDT loading address to avoid overlaping   Otavio Salvador
• [U-Boot] [PATCH] ARM: mx6: Remove the FDT loading address to avoid overlaping   Tom Rini
• [U-Boot] [PATCH] ARM: mx6: Remove the FDT loading address to avoid overlaping   Otavio Salvador
• [U-Boot] [PATCH] ARM: mx6: Remove the FDT loading address to avoid overlaping   Stefano Babic
• [U-Boot] [PATCH] ARM: mx6: Remove the FDT loading address to avoid overlaping   Otavio Salvador
• [U-Boot] [PATCH] ARM: mx6: Remove the FDT loading address to avoid overlaping   Dennis Gilmore
• [U-Boot] [PATCH] ARM: mx6: Remove the FDT loading address to avoid overlaping   Dennis Gilmore
• [U-Boot] [PATCH] ARM: mx6: Update non-Freescale boards to include CPU errata.   Eric Nelson
• [U-Boot] [PATCH] ARM: mx6: Update non-Freescale boards to include CPU errata.   Fabio Estevam
• [U-Boot] [PATCH] ARM: mx6: Update non-Freescale boards to include CPU errata.   Eric Nelson
• [U-Boot] [PATCH] ARM: mx6: Update non-Freescale boards to include CPU errata.   Stefan Roese
• [U-Boot] [PATCH] arm: New stack pointer is already aligned   Tom Rini
• [U-Boot] [PATCH] arm: New stack pointer is already aligned   Wolfgang Denk
• [U-Boot] [PATCH] arm: omap3: Add uart4 omap3 adddress   Michael Trimarchi
• [U-Boot] [PATCH] arm: omap3: Add uart4 omap3 adddress   Tom Rini
• [U-Boot] [PATCH] arm: omap3: Add uart4 omap3 adddress   Michael Trimarchi
• [U-Boot] [PATCH] arm: omap3: Add uart4 omap3 adddress   Tom Rini
• [U-Boot] [PATCH] arm: omap3: Add uart4 omap3 adddress   Michael Trimarchi
• [U-Boot] [PATCH] arm: omap3: Add uart4 omap3 adddress   Michael Trimarchi
• [U-Boot] [PATCH] arm: omap3: Enable clocks for peripherals only if they are used   Michael Trimarchi
• [U-Boot] [PATCH] arm: omap3: Enable clocks for peripherals only if they are used   Igor Grinberg
• [U-Boot] [PATCH] arm: omap3: Enable clocks for peripherals only if they are used   Michael Trimarchi
• [U-Boot] [PATCH] arm: omap3: Enable clocks for peripherals only if they are used   Michael Trimarchi
• [U-Boot] [PATCH] arm: omap3: Enable clocks for peripherals only if they are used   Igor Grinberg
• [U-Boot] [PATCH] arm: omap3: Enable clocks for peripherals only if they are used   Michael Trimarchi
• [U-Boot] [PATCH] arm: omap3: Enable clocks for peripherals only if they are used   Tom Rini
• [U-Boot] [PATCH] arm: omap3: Enable clocks for peripherals only if they are used   Michael Trimarchi
• [U-Boot] [PATCH] arm: omap3: Enable clocks for peripherals only if they are used   Igor Grinberg
• [U-Boot] [PATCH] arm: omap3: i2c: don't zero cnt in i2c_write   Nikita Kiryanov
• [U-Boot] [PATCH] arm: omap3: i2c: don't zero cnt in i2c_write   Tom Rini
• [U-Boot] [PATCH] arm: omap3: i2c: don't zero cnt in i2c_write   Nikita Kiryanov
• [U-Boot] [PATCH] ARM: OMAP4: Fix bug in omap4470_volts struct   Lubomir Popov
• [U-Boot] [PATCH] ARM: OMAP5+: Remove unnecessary EFUSE settings   Lokesh Vutla
• [U-Boot] [PATCH] ARM: pxa: Fix CONFIG_SYS_HZ on PXA   Marek Vasut
• [U-Boot] [PATCH] arm: Remove unused !CONFIG_SPL_BUILD code in board_init_f()   Tom Rini
• [U-Boot] [PATCH] arm: Remove unused !CONFIG_SPL_BUILD code in board_init_f()   Masahiro Yamada
• [U-Boot] [PATCH] arm: Remove unused !CONFIG_SPL_BUILD code in board_init_f()   Simon Glass
• [U-Boot] [PATCH] arm: Remove unused !CONFIG_SPL_BUILD code in board_init_f()   Masahiro Yamada
• [U-Boot] [PATCH] arm: Remove unused !CONFIG_SPL_BUILD code in board_init_f()   Tom Rini
• [U-Boot] [PATCH] ARM: rpi_b: power on SDHCI and USB HW modules   Stephen Warren
• [U-Boot] [PATCH] arm: tegra: Fix the CPU complex reset masks   Alban Bedel
• [U-Boot] [PATCH] arm: tegra: Fix the CPU complex reset masks   Stephen Warren
• [U-Boot] [PATCH] arm: tegra: Fix the CPU complex reset masks   Alban Bedel
• [U-Boot] [PATCH] arm: tegra: Fix the CPU complex reset masks   Stephen Warren
• [U-Boot] [PATCH] arm: trats: add the sd-card power control function.   Jaehoon Chung
• [U-Boot] [PATCH] arm: trats: add the sd-card power control function.   Lukasz Majewski
• [U-Boot] [PATCH] arm: trats: add the sd-card power control function.   Jaehoon Chung
• [U-Boot] [PATCH] arm: use canonical sub mnemonic   Andreas Bießmann
• [U-Boot] [PATCH] bios_emulator: delete an unnecessary include path   Masahiro Yamada
• [PATCH] Blackfin: don't use 'bool' when it causes problems   Wolfgang Denk
• [U-Boot] [PATCH] Blackfin: remove executable permission of AWK script   Masahiro Yamada
• [U-Boot] [PATCH] blackfin: soft-i2c: No need to define blackfin specific soft i2c operations.   Sonic Zhang
• [U-Boot] [PATCH] blackfin: soft-i2c: No need to define blackfin specific soft i2c operations.   Masahiro Yamada
• [U-Boot] [PATCH] board/keymile/kmp204x/Makefile: Convert to SPDX tag   Tom Rini
• [U-Boot] [PATCH] board/keymile/kmp204x/Makefile: Convert to SPDX tag   Tom Rini
• [U-Boot] [PATCH] board: cogent: include header files in a more natural way   Masahiro Yamada
• [U-Boot] [PATCH] board: Do not add -DCONFIG_SYS_TEXT_BASE in board config.mk   Masahiro Yamada
• [U-Boot] [PATCH] board: h2200: Delete an unnecessary make rule   Masahiro Yamada
• [U-Boot] [PATCH] board: powerpc: convert more makefiles to Kbuild style   Tom Rini
• [U-Boot] [PATCH] board: powerpc: convert more makefiles to Kbuild style   Tom Rini
• [U-Boot] [PATCH] board: tqm5200: delete its own object make rule   Masahiro Yamada
• [U-Boot] [PATCH] board_f: explicitly disable console on early boot   Simon Glass
• [U-Boot] [PATCH] board_f: explicitly disable console on early boot   Alexey Brodkin
• [U-Boot] [PATCH] board_f: explicitly disable console on early boot   Alexey Brodkin
• [U-Boot] [PATCH] boards.cfg: update email address for ti814x_evm maintainer   Matt Porter
• [U-Boot] [PATCH] buildman: fix README   Andreas Bießmann
• [U-Boot] [PATCH] buildman: fix README   Simon Glass
• [U-Boot] [PATCH] buildman: fix README   Simon Glass
• [U-Boot] [PATCH] cm-t35: move the leds code to common place   Igor Grinberg
• [U-Boot] [PATCH] cm-t35: move the leds code to common place   Igor Grinberg
• [U-Boot] [PATCH] cm-t35: use gpio_led driver for status led   Igor Grinberg
• [U-Boot] [PATCH] cmd_eeprom: fix i2c_{read|write} usage if env is in I2C EEPROM   Alexey Brodkin
• [U-Boot] [PATCH] cmd_test: fix a compile error on Blackfin   Masahiro Yamada
• [U-Boot] [PATCH] cmd_test: fix a compile error on Blackfin   Masahiro Yamada
• [U-Boot] [PATCH] cmd_test: fix a compile error on Blackfin   Wolfgang Denk
• [U-Boot] [PATCH] cmd_test: fix a compile error on Blackfin   Masahiro Yamada
• [U-Boot] [PATCH] cmd_test: fix a compile error on Blackfin   Måns Rullgård
• [U-Boot] [PATCH] cmd_test: fix a compile error on Blackfin   Masahiro Yamada
• [U-Boot] [PATCH] cmd_test: fix a compile error on Blackfin   Masahiro Yamada
• [U-Boot] [PATCH] cmd_test: fix a compile error on Blackfin   Tom Rini
• [U-Boot] [PATCH] cmd_test: fix a compile error on Blackfin   Wolfgang Denk
• [U-Boot] [PATCH] cmd_test: fix a compile error on Blackfin   Masahiro Yamada
• [U-Boot] [PATCH] ColdFire: fix some typoes for CF platform   Jason Jin
• [U-Boot] [PATCH] common/cmd_bootm.c: fix subcommand processing in OS specific do_bootm_xxx() functions   myan
• [U-Boot] [PATCH] common: Delete unnecessary rules.   Masahiro Yamada
• [U-Boot] [PATCH] config: arm: exynos5250: remove duplicate defines   Minkyu Kang
• [U-Boot] [PATCH] config: arm: exynos5250: remove duplicate defines   Luka Perkov
• [U-Boot] [PATCH] configs: clean up unused macro CONFIG_L2_OFF   Masahiro Yamada
• [U-Boot] [PATCH] configs: clean up unused macro CONFIG_L2_OFF   Masahiro Yamada
• [U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards   Stefano Babic
• [U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards   Stefano Babic
• [U-Boot] [PATCH] configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option   Stefano Babic
• [U-Boot] [PATCH] configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option   Fabio Estevam
• [U-Boot] [PATCH] Correct vxWorks elf boot to load at correct address   Stany MARCEL
• [U-Boot] [PATCH] cosmetic: README.scrapyard: Add eNET board   Masahiro Yamada
• [U-Boot] [PATCH] cosmetic: README.scrapyard: Add eNET board   Simon Glass
• [U-Boot] [PATCH] cosmetic: remove empty lines at the top of file   Masahiro Yamada
• [U-Boot] [PATCH] davinci: fix Master Priority Registers location   Viktar Palstsiuk
• [U-Boot] [PATCH] designware_i2c: disable i2c controller during target address setup   Alexey Brodkin
• [U-Boot] [PATCH] designware_i2c: disable i2c controller during target address setup   Albert ARIBAUD
• [U-Boot] [PATCH] designware_i2c: disable i2c controller during target address setup   Albert ARIBAUD
• [U-Boot] [PATCH] designware_i2c: remove 10msec delay in i2c_xfer_finish   Alexey Brodkin
• [U-Boot] [PATCH] driver: i2c:s3c24x0: init each channel during probe   Naveen Krishna Ch
• [U-Boot] [PATCH] driver: i2c:s3c24x0: init each channel during probe   Heiko Schocher
• [U-Boot] [PATCH] driver: i2c:s3c24x0: init each channel during probe   Naveen Krishna Chatradhi
• [U-Boot] [PATCH] drivers/mtd: descend into sub directories only when it is necessary   Masahiro Yamada
• [U-Boot] [PATCH] drivers/usb/gadget: select objects by obj-$(CONFIG-...)   Masahiro Yamada
• [U-Boot] [PATCH] drivers: delete unnecessary HOSTCFLAGS   Masahiro Yamada
• [U-Boot] [PATCH] drivers:power:exynos-tmu: add support for Exynos5260   Naveen Krishna Chatradhi
• [U-Boot] [PATCH] dwmmc: make driver usable for non-exynos platforms   Jaehoon Chung
• [U-Boot] [PATCH] dwmmc: make driver usable for non-exynos platforms   Alexey Brodkin
• [U-Boot] [PATCH] dwmmc: make driver usable for non-exynos platforms   Jaehoon Chung
• [U-Boot] [PATCH] dwmmc: make driver usable for non-exynos platforms   Alexey Brodkin
• [U-Boot] [PATCH] dwmmc: make driver usable for non-exynos platforms   Jaehoon Chung
• [U-Boot] [PATCH] dwmmc: make driver usable for non-exynos platforms   Alexey Brodkin
• [U-Boot] [PATCH] examples: add again x86 standalone example   Masahiro Yamada
• [U-Boot] [PATCH] examples: delete unnecessary CPPFLAGS   Masahiro Yamada
• [U-Boot] [PATCH] examples: remove the remainders of dead board   Masahiro Yamada
• [U-Boot] [PATCH] Exynos5: Clock: Generic api to set and get clock rate and source   Rajeshwari S Shinde
• [U-Boot] [PATCH] Exynos5: Clock: Generic api to set and get clock rate and source   Rajeshwari Birje
• [U-Boot] [PATCH] freescale: p1_p2_rdb_pc: rename COBJS-y to obj-y   Masahiro Yamada
• [U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting   Pantelis Antoniou
• [U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting   Zhang Haijun
• [U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting   Zhang Haijun
• [U-Boot] [PATCH] hash.c: Correct non-hash subcommand crc32 addr-save support   Tom Rini
• [U-Boot] [PATCH] i.MX6: nitrogen6x: update memory configuration files to use macros   Eric Nelson
• [U-Boot] [PATCH] i.MX6: nitrogen6x: update memory configuration files to use macros   Marek Vasut
• [U-Boot] [PATCH] i.MX6: nitrogen6x: update memory configuration files to use macros   Marek Vasut
• [U-Boot] [PATCH] i.MX6: nitrogen6x: update memory configuration files to use macros   Eric Nelson
• [U-Boot] [PATCH] i.MX6: nitrogen6x: update memory configuration files to use macros   Stefano Babic
• [U-Boot] [PATCH] i.MX6: nitrogen6x: update memory configuration files to use macros   Eric Nelson
• [U-Boot] [PATCH] i2c, zynq: convert zynq i2c driver to new multibus/multiadapter framework   Heiko Schocher
• [U-Boot] [PATCH] i2c, omap1510: remove i2c driver   Heiko Schocher
• [U-Boot] [PATCH] i2c, omap1510: remove i2c driver   Tom Rini
• [U-Boot] [PATCH] i2c: mxs_i2c: Squash endless loop   Marek Vasut
• [U-Boot] [PATCH] i2c: mxs_i2c: Squash endless loop   Stefano Babic
• [U-Boot] [PATCH] i2c: mxs_i2c: Squash endless loop   Marek Vasut
• [U-Boot] [PATCH] i2c: mxs_i2c: Squash endless loop   Stefano Babic
• [U-Boot] [PATCH] i2c: mxs_i2c: Squash endless loop   Heiko Schocher
• [U-Boot] [PATCH] i2c: mxs_i2c: Squash endless loop   Marek Vasut
• [U-Boot] [PATCH] i2c: mxs_i2c: Squash endless loop   Heiko Schocher
• [U-Boot] [PATCH] i2c: mxs_i2c: Squash endless loop   Marek Vasut
• [U-Boot] [PATCH] i2c: samsung: register i2c busses for Exynso5420 and Exynos5250   Naveen Krishna Ch
• [U-Boot] [PATCH] i2c: samsung: register i2c busses for Exynso5420 and Exynos5250   Naveen Krishna Chatradhi
• [U-Boot] [PATCH] imx-common: remove extraneous semicolon from macro   Stefano Babic
• [U-Boot] [PATCH] imx-common: remove extraneous semicolon from macro   Eric Nelson
• [U-Boot] [PATCH] imx: Define common routines to set cpu and board environment variables   Eric Nelson
• [U-Boot] [PATCH] imx: Explicitly pass the I2C bus number in pmic_init()   Fabio Estevam
• [U-Boot] [PATCH] imx: Explicitly pass the I2C bus number in pmic_init()   Stefano Babic
• [U-Boot] [PATCH] include: define bool type in a more portable way   Wolfgang Denk
• [U-Boot] [PATCH] include: define bool type in a more portable way   Tom Rini
• [U-Boot] [PATCH] include: define bool type in a more portable way   Måns Rullgård
• [U-Boot] [PATCH] include: define bool type in a more portable way   Masahiro Yamada
• [U-Boot] [PATCH] include: define bool type in a more portable way   Masahiro Yamada
• [U-Boot] [PATCH] include: define bool type in a more portable way   Graeme Russ
• [U-Boot] [PATCH] include: define bool type in a more portable way   Masahiro Yamada
• [U-Boot] [PATCH] include: define bool type in a more portable way   Graeme Russ
• [U-Boot] [PATCH] include: define bool type in a more portable way   Masahiro Yamada
• [U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error   Gupta, Pekon
• [U-Boot] [PATCH] lcd: allow overriding lcd_get_size()   Anatolij Gustschin
• [U-Boot] [PATCH] lcd: allow overriding lcd_get_size()   Anatolij Gustschin
• [U-Boot] [PATCH] MAKEALL: add -b (--board) option   Masahiro Yamada
• [U-Boot] [PATCH] MAKEALL: fix awk warning   Andreas Bießmann
• [U-Boot] [PATCH] MAKEALL: fix awk warning   Masahiro Yamada
• [U-Boot] [PATCH] MAKEALL: fix awk warning   Andreas Bießmann
• [U-Boot] [PATCH] Makefile: delete a make rule of $(LDSCRIPT)   Masahiro Yamada
• [U-Boot] [PATCH] Makefile: delete unnecessary CPPFLAGS settings   Masahiro Yamada
• [U-Boot] [PATCH] Makefile: delete unnecessary lines   Masahiro Yamada
• [U-Boot] [PATCH] Makefile: descend into subdirectories only when CONFIG_API is defined   Masahiro Yamada
• [U-Boot] [PATCH] Makefile: descend into subdirectories only when CONFIG_API is defined   Masahiro Yamada
• [U-Boot] [PATCH] Makefile: do not create a symbolic link to arch/${ARCH}/include/asm   Masahiro Yamada
• [U-Boot] [PATCH] Makefile: Do not create empty autoconf.mk on error   Masahiro Yamada
• [U-Boot] [PATCH] Makefile: move some libraries to lib/Makefile   Masahiro Yamada
• [U-Boot] [PATCH] Makefile: Move some scripts imported from Linux   Masahiro Yamada
• [U-Boot] [PATCH] Makfile: fix a rule to build u-boot.sb   Masahiro Yamada
• [U-Boot] [PATCH] malta: arch/mips/include/asm/malta.h SPDX license tag   Daniel Schwierzeck
• [U-Boot] [PATCH] malta: arch/mips/include/asm/malta.h SPDX license tag   Paul Burton
• [U-Boot] [PATCH] malta: define CONFIG_MEMSIZE_IN_BYTES   Daniel Schwierzeck
• [U-Boot] [PATCH] malta: use unmapped flash base address   Gabor Juhos
• [U-Boot] [PATCH] malta: use unmapped flash base address   Paul Burton
• [U-Boot] [PATCH] malta: use unmapped flash base address   Gabor Juhos
• [U-Boot] [PATCH] mii: dump: parameter choice   Joe Hershberger
• [U-Boot] [PATCH] MIPS: use CONFIG_SYS_TEXT_BASE in relocation calculations   Gabor Juhos
• [U-Boot] [PATCH] MIPS: use CONFIG_SYS_TEXT_BASE in relocation calculations   Daniel Schwierzeck
• [U-Boot] [PATCH] MIPS: use CONFIG_SYS_TEXT_BASE in relocation calculations   Daniel Schwierzeck
• [U-Boot] [PATCH] MIPS: use CONFIG_SYS_TEXT_BASE in relocation calculations   Gabor Juhos
• [U-Boot] [PATCH] MIPS: use CONFIG_SYS_TEXT_BASE in relocation calculations   Daniel Schwierzeck
• [U-Boot] [PATCH] MIPS: use CONFIG_SYS_TEXT_BASE in relocation calculations   Gabor Juhos
• [U-Boot] [PATCH] MIPS: use CONFIG_SYS_TEXT_BASE in relocation calculations   Daniel Schwierzeck
• [U-Boot] [PATCH] MIPS: use CONFIG_SYS_TEXT_BASE in relocation calculations   Gabor Juhos
• [U-Boot] [PATCH] mmc/dwmmc: remove recursive FIFO threshold setup   Jaehoon Chung
• [U-Boot] [PATCH] mmc/dwmmc: remove recursive FIFO threshold setup   Pantelis Antoniou
• [U-Boot] [PATCH] mmc/dwmmc: remove recursive FIFO threshold setup   Pantelis Antoniou
• [U-Boot] [PATCH] mmc/dwmmc: remove recursive FIFO threshold setup   Jaehoon Chung
• [U-Boot] [PATCH] mmc/dwmmc: remove recursive FIFO threshold setup   Alexey Brodkin
• [U-Boot] [PATCH] mmc/dwmmc: remove recursive FIFO threshold setup   Alexey Brodkin
• [U-Boot] [PATCH] mmc: add Faraday FTSDC021 SDHCI controller support   Kuo-Jung Su
• [U-Boot] [PATCH] mmc: dw_mmc: remove the exynos specific code in dw-mmc.c   Alexey Brodkin
• [U-Boot] [PATCH] mmc: dw_mmc: remove the exynos specific code in dw-mmc.c   Rajeshwari Birje
• [U-Boot] [PATCH] mmc: dw_mmc: remove the exynos specific code in dw-mmc.c   Pantelis Antoniou
• [U-Boot] [PATCH] mmc: dw_mmc: remove the exynos specific code in dw-mmc.c   Jaehoon Chung
• [U-Boot] [PATCH] MPC824x: remove obsolete "PN62" board   Wolfgang Denk
• [U-Boot] [PATCH] MPC824x: remove obsolete "PN62" board   Tom Rini
• [U-Boot] [PATCH] mtd: Add _LARGE to MTD_MAX_*_ENTRIES   Scott Wood
• [U-Boot] [PATCH] mtd: Add _LARGE to MTD_MAX_*_ENTRIES   Lukasz Majewski
• [U-Boot] [PATCH] mx6: Add initial support for Carrier1 mx6solo board   Fabio Estevam
• [U-Boot] [PATCH] mx6: Add initial support for Carrier1 mx6solo board   Fabio Estevam
• [U-Boot] [PATCH] mx6: Add initial support for Carrier1 mx6solo board   Stefano Babic
• [U-Boot] [PATCH] mx6: Add initial support for Carrier1 mx6solo board   Fabio Estevam
• [U-Boot] [PATCH] mx6: titanium: Move BSP code to barco board directory   Stefan Roese
• [U-Boot] [PATCH] mx6: titanium: Move BSP code to barco board directory   Peter Korsgaard
• [U-Boot] [PATCH] mx6: titanium: Move BSP code to barco board directory   Stefano Babic
• [U-Boot] [PATCH] mx6sabre_common: Allow booting a FSL 3.10 kernel   Otavio Salvador
• [U-Boot] [PATCH] mx6sabre_common: Allow booting a FSL 3.10 kernel   Fabio Estevam
• [U-Boot] [PATCH] mx6sabre_common: Allow booting a FSL 3.10 kernel   Otavio Salvador
• [U-Boot] [PATCH] mx6sabre_common: Allow booting a FSL 3.10 kernel   Fabio Estevam
• [U-Boot] [PATCH] mx6sabre_common: Allow booting a FSL 3.10 kernel   Stefano Babic
• [U-Boot] [PATCH] mx6sabre_common: Allow booting a FSL 3.10 kernel   Fabio Estevam
• [U-Boot] [PATCH] mx6sabresd: Add SPI NOR support   Fabio Estevam
• [U-Boot] [PATCH] mx6sabresd: Add SPI NOR support   Stefano Babic
• [U-Boot] [PATCH] mx6sabresd: Fix wrong colors in LVDS display   Fabio Estevam
• [U-Boot] [PATCH] mx6sabresd: Fix wrong colors in LVDS display   Liu Ying
• [U-Boot] [PATCH] mxs_gpio: fix the handling in gpio_direction_output()   Michael Heimpold
• [U-Boot] [PATCH] mxs_gpio: fix the handling in gpio_direction_output()   Stefano Babic
• [U-Boot] [PATCH] mxs_gpio: fix the handling in gpio_direction_output()   Stefano Babic
• [U-Boot] [PATCH] nand_spl: trivial refactoring of makefiles   Masahiro Yamada
• [U-Boot] [PATCH] net/fman: add ft_fixup_xgec to support 3rd and 4th 10GEC   Shengzhou Liu
• [U-Boot] [PATCH] net/phy: Add Vitesse VSC8514 PHY support   shh.xie at gmail.com
• [U-Boot] [PATCH] net/phy: Fix the phy id mask of AR8031   Chunhe Lan
• [U-Boot] [PATCH] Net: FEC: Fix huge memory leak   Stefano Babic
• [U-Boot] [PATCH] net: phy: atheros: Fix masks for AR8035 and AR8021   Fabio Estevam
• [U-Boot] [PATCH] nios2: remove unnecessary header include path   Masahiro Yamada
• [U-Boot] [PATCH] nitrogen6x: Remove unused OCOTP options   Fabio Estevam
• [U-Boot] [PATCH] nitrogen6x: Remove unused OCOTP options   Eric Nelson
• [U-Boot] [PATCH] nitrogen6x: Remove unused OCOTP options   Stefano Babic
• [U-Boot] [PATCH] omap730p2: Remove board   Tom Rini
• [U-Boot] [PATCH] omap730p2: Remove board   Tom Rini
• [U-Boot] [PATCH] p1010rdb: enable mtdparts for NAND   York Sun
• [U-Boot] [PATCH] pcm051: Support for revision 3   Lars Poeschel
• [U-Boot] [PATCH] pcm051: Support for revision 3   Tom Rini
• [U-Boot] [PATCH] pcm051: Support for revision 3   Lars Poeschel
• [U-Boot] [PATCH] pcm051: Support for revision 3   Tom Rini
• [U-Boot] [PATCH] phy: introduce structure fixed-link   shh.xie at gmail.com
• [U-Boot] [PATCH] phy: introduce structure fixed-link   York Sun
• [U-Boot] [PATCH] phy: introduce structure fixed-link   Shaohui Xie
• [U-Boot] [PATCH] phy: introduce structure fixed-link   York Sun
• [U-Boot] [PATCH] post: remove unnecessary include path settings   Masahiro Yamada
• [U-Boot] [PATCH] powerpc/83xx: Define USB1 and USB2 base addr for MPC834x   york sun
• [U-Boot] [PATCH] powerpc/85xx: fix broken cpu "clock-frequency" property   york sun
• [U-Boot] [PATCH] powerpc/corenet: CPC1 speculation disable   shh.xie at gmail.com
• [U-Boot] [PATCH] powerpc/esdhc: Update esdhc command execution process   Haijun Zhang
• [U-Boot] [PATCH] powerpc/esdhc: Update esdhc command execution process   Zhang Haijun
• [U-Boot] [PATCH] powerpc/mpc85xx: Add support for single source clocking   Priyanka Jain
• [U-Boot] [PATCH] powerpc/p1010rdb:modify the mtest start_address   Zhao Qiang
• [U-Boot] [PATCH] powerpc/p4080: enable support for PCIe SATA   shh.xie at gmail.com
• [U-Boot] [PATCH] powerpc/p4080: enable support for PCIe SATA   York Sun
• [U-Boot] [PATCH] powerpc/t1040: enable PBL tool for T1040   york sun
• [U-Boot] [PATCH] powerpc/t1040qds: Add DDR Raw Timing support   Priyanka Jain
• [U-Boot] [PATCH] powerpc/t1040qds: Correct Maintainer name in boards.cfg   York Sun
• [U-Boot] [PATCH] powerpc/t4240: Add a frequency setting case for fman1   shh.xie at gmail.com
• [U-Boot] [PATCH] powerpc/t4240: fix per pci endpoint liodn offsets   york sun
• [U-Boot] [PATCH] powerpc/t4240: set pcie liodn in the correct register   york sun
• [U-Boot] [PATCH] PowerPC: merge commonly-defined flags   Masahiro Yamada
• [U-Boot] [PATCH] README: remove wrong config name   Igor Grinberg
• [U-Boot] [PATCH] Remove <<<<<< HEAD from boards.cfg   Wink Saville
• [U-Boot] [PATCH] Revert "ARM: move interrupt_init to before relocation"   Albert ARIBAUD
• [U-Boot] [PATCH] RFC: samsung: i2c: Enable new CONFIG_SYS_I2C framework   Piotr Wilczek
• [U-Boot] [PATCH] RFC: samsung: i2c: Enable new CONFIG_SYS_I2C framework   Naveen Krishna Ch
• [U-Boot] [PATCH] rsa: add a more flexible way to support different hash algorithms (e.g. sha256)   andreas at oetken.name
• [U-Boot] [PATCH] s5p: gpio: change gpio coding method for s5p gpio.   Przemyslaw Marczak
• [U-Boot] [PATCH] s5p: gpio: change gpio coding method for s5p gpio.   Przemyslaw Marczak
• [U-Boot] [PATCH] sandbox: Use system headers first for sandbox's os.c in a different way   Masahiro Yamada
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Chin Liang See
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Detlev Zundel
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Detlev Zundel
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Pavel Machek
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Tom Rini
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Michal Simek
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Michal Simek
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Chin Liang See
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Michal Simek
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Tom Rini
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Dinh Nguyen
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Chin Liang See
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Michal Simek
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Chin Liang See
• [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board   Michal Simek
• [U-Boot] [PATCH] serial: lpc32xx: send CR before LF   Vladimir Zapolskiy
• [U-Boot] [PATCH] serial: lpc32xx: send CR before LF   Marek Vasut
• [U-Boot] [PATCH] serial: lpc32xx: send CR before LF   Vladimir Zapolskiy
• [U-Boot] [PATCH] serial: lpc32xx: send CR before LF   Vladimir Zapolskiy
• [U-Boot] [PATCH] serial: lpc32xx: send CR before LF   Wolfgang Denk
• [U-Boot] [PATCH] serial: zynq: Remove unused #defines   Michal Simek
• [U-Boot] [PATCH] sparc: Correct arch/sparc/cpu/leon3/start.S from SPDX conversion   Tom Rini
• [U-Boot] [PATCH] spi: Add support SH Quad SPI driver   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] spi: tegra: clear RDY bit prior to every transfer   Stephen Warren
• [U-Boot] [PATCH] spieval: Remove remainders of dead board   Masahiro Yamada
• [U-Boot] [PATCH] T4240: Address T4240/T4160 Rev2.0 DDR clock change   Roy Zang
• [U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled   Vidya Sagar
• [U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled   Vidya Sagar
• [U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled   Vidya Sagar
• [U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled   Vidya Sagar
• [U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled   Stephen Warren
• [U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled   Stephen Warren
• [U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled   Vidya Sagar
• [U-Boot] [PATCH] TI:omap: Update u-boot-spl.lds for i2c multibus/multiadapter update   Tom Rini
• [U-Boot] [PATCH] time: fix gcc warnings on MIPS64   Daniel Schwierzeck
• [U-Boot] [PATCH] titanium: Return the error when cpu_eth_init() fails   Fabio Estevam
• [U-Boot] [PATCH] titanium: Return the error when cpu_eth_init() fails   Stefan Roese
• [U-Boot] [PATCH] titanium: Return the error when cpu_eth_init() fails   Stefano Babic
• [U-Boot] [PATCH] tools: imls: Remove a broken and unused tool.   Masahiro Yamada
• [U-Boot] [PATCH] tools: updater: Remove remainders of dead board   Masahiro Yamada
• [U-Boot] [PATCH] trats: enable dfu and thor protocol for Tizen download   Piotr Wilczek
• [U-Boot] [PATCH] trats: enable dfu and thor protocol for Tizen download   Jaehoon Chung
• [U-Boot] [PATCH] trats: enable dfu and thor protocol for Tizen download   Piotr Wilczek
• [U-Boot] [PATCH] trats: usb: Add usb_cable_connected() function   Przemyslaw Marczak
• [U-Boot] [PATCH] trats: usb: Add usb_cable_connected() function   Przemyslaw Marczak
• [PATCH] vexpress: Enable some additional config options   Ian Campbell
• [U-Boot] [PATCH] wandboard: README: Include the quad version   Fabio Estevam
• [U-Boot] [PATCH] wandboard: README: Include the quad version   Stefano Babic
• [U-Boot] [PATCH] wandboard: README: Include the quad version   Stefano Babic
• [U-Boot] [PATCH][RESEND 0/2] get_ram_size incorrectly returns long, should be unsigned long   Oliver Schinagl
• [U-Boot] [PATCH][RESEND 1/2] get_ram_size incorrectly returns long, should be unsigned long   Oliver Schinagl
• [U-Boot] [PATCH][RESEND 2/2] Update all references to get_ram_size to unsigned long   Oliver Schinagl
• [U-Boot] [PATCH][v2] powerpc/t1040: Update defines to support T1040SoC personalities   york sun
• [U-Boot] [PATCH][v2] powerpc/T1040EMU: Add T1040 emulator support   Priyanka Jain
• [U-Boot] [PATCH][v2] powerpc/T1040EMU: Add T1040 emulator support   York Sun
• [U-Boot] [PATCH][v3] powerpc: mmc: Add corenet devices support in esdhc spl   Priyanka Jain
• [U-Boot] [PATCH][v3] powerpc: spiflash:Add corenet devices support in eSPI SPL   Priyanka Jain
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Andreas Bießmann
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Andreas Bießmann
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [RESEND PATCH v14 07/10] arm64: core support   York Sun
• [U-Boot] [RESEND PATCH v14 07/10] arm64: core support   Scott Wood
• [U-Boot] [RESEND PATCH v14 07/10] arm64: core support   york sun
• [U-Boot] [RESEND PATCH v14 07/10] arm64: core support   Scott Wood
• [U-Boot] [RESEND PATCH v14 07/10] arm64: core support   Simon Glass
• [U-Boot] [RESEND PATCH v4 1/1] socfpga: Adding Freeze Controller driver   Chin Liang See
• [U-Boot] [RESEND PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro   Benoît Thébaudeau
• [U-Boot] [RFC PATCH 1/2] usb: dfu: decrease dfu->r_left along with the transfer   Bo Shen
• [U-Boot] [RFC PATCH 2/2] usb: dfu: correct dfu buffer inited value   Lukasz Majewski
• [U-Boot] [RFC PATCH 2/2] usb: dfu: correct dfu buffer inited value   Bo Shen
• [U-Boot] [RFC PATCH 2/2] usb: dfu: correct dfu buffer inited value   Lukasz Majewski
• [U-Boot] [RFC PATCH 2/2] usb: dfu: correct dfu buffer inited value   Marek Vasut
• [U-Boot] [RFC PATCH V2] imx: add multi-BOM README   Eric Nelson
• [U-Boot] [RFC PATCH V2] imx: add multi-BOM README   Wolfgang Denk
• [U-Boot] [RFC PATCH V2] imx: add multi-BOM README   Stefano Babic
• [U-Boot] [RFC PATCH] usb: dfu: make nand upload working   Bo Shen
• [U-Boot] [RFC] arm926ejs, at91: add common phy_reset function   Heiko Schocher
• [U-Boot] [RFC] arm926ejs, at91: add common phy_reset function   Andreas Bießmann
• [U-Boot] [RFC] arm926ejs, at91: add common phy_reset function   Heiko Schocher
• [U-Boot] [RFC] arm926ejs, at91: add common phy_reset function   Bo Shen
• [U-Boot] [RFC] arm926ejs, at91: add common phy_reset function   Heiko Schocher
• [U-Boot] [RFC] arm926ejs, at91: add common phy_reset function   Bo Shen
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Wolfgang Denk
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Heiko Schocher
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Lukasz Majewski
• [U-Boot] [RFC][PATCH 0/5] SATA support for OMAP5 uevm   Roger Quadros
• [U-Boot] [RFC][PATCH 0/5] SATA support for OMAP5 uevm   Enric Balletbo Serra
• [U-Boot] [RFC][PATCH 0/5] SATA support for OMAP5 uevm   Roger Quadros
• [U-Boot] [RFC][PATCH 0/5] SATA support for OMAP5 uevm   Roger Quadros
• [U-Boot] [U-BOOT PATCH] net: zynq_gem: Add d-cache support   Jagannadha Sutradharudu Teki
• [U-Boot] [U-Boot v2] [PATCH] rsa: add a more flexible way to support different hash algorithms (e.g. sha256)   andreas at oetken.name
• [U-Boot] [U-Boot, 1/2] autoboot: add an option to override keyed autoboot   Tom Rini
• [U-Boot] [U-Boot, 1/2] cm-t35: move the eeprom code to common place   Tom Rini
• [U-Boot] [U-Boot, 1/2] highbank: set AUTOBOOT_KEYED_CTRLC config option   Tom Rini
• [U-Boot] [U-Boot, 1/3] cm_t35: reduce default bootdelay to 3 seconds   Tom Rini
• [U-Boot] [U-Boot, 1/3] cmd_ubifs: normalize 'file not found' errors   Tom Rini
• [U-Boot] [U-Boot, 1/3] README: document the CONFIG_GPIO_LED symbol   Tom Rini
• [U-Boot] [U-Boot, 2/2] cm-t35: move the display code to common place   Tom Rini
• [U-Boot] [U-Boot, 2/3] cmd_reiser: normalize 'file not found' errors   Tom Rini
• [U-Boot] [U-Boot, 2/3] gpio_led: check gpio_request() return value   Tom Rini
• [U-Boot] [U-Boot, 3/3] ahci: support LBA48 data reads for 2+TB drives   Tom Rini
• [U-Boot] [U-Boot, 3/3] cmd_zfs: normalize 'file not found' errors   Tom Rini
• [U-Boot] [U-Boot, 3/3] gpio_led: add support for inverted polarity   Tom Rini
• [U-Boot] [U-Boot, v2] configs: clean up unused macro CONFIG_L2_OFF   Tom Rini
• [U-Boot] [U-Boot, v2] i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework   Heiko Schocher
• [U-Boot] [U-Boot, v3] cmd/gpt: Support gpt command for all devices   Tom Rini
• [U-Boot] [U-Boot, 01/13] tricorder: remove lcdmode from bootargs   Tom Rini
• [U-Boot] [U-Boot, 1/3, v5] mtd: move & update nand_ecclayout structure   Scott Wood
• [U-Boot] [U-Boot, 1/5] cosmetic: doc: driver-model: Do not number driver lists   Tom Rini
• [U-Boot] [U-Boot, 1/5] MTD: nand: increase the max eccpos size to 448 to support 8k page nand   Scott Wood
• [U-Boot] [U-Boot, 2/5] cosmetic: UDM-serial: clean up the remainders of dead driver   Tom Rini
• [U-Boot] [U-Boot, 2/5] mtd: atmel_nand: enable PMECC support for 8k bytes page NAND flash   Scott Wood
• [U-Boot] [U-Boot, 3/5] cosmetic: UDM-net: clean up the remainders of dead driver   Tom Rini
• [U-Boot] [U-Boot, v1, 1/1] netconsole loses 2nd character of input   Tom Rini
• [U-Boot] [U-Boot, v1, 1/4] mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width   Scott Wood
• [U-Boot] [U-Boot, v1, 1/4] mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width   Gupta, Pekon
• [U-Boot] [U-Boot, v1, 1/4] mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width   Scott Wood
• [U-Boot] [U-Boot, v2, 1/2] serial: xuartlite: Staticize local functions   Tom Rini
• [U-Boot] [U-Boot, v2, 2/2] serial: s5p: Staticize local functions   Tom Rini
• [U-Boot] [U-Boot, v2, 2/4] MAKEALL: fix a bug to use CROSS_COMPILE_<ARCH>   Tom Rini
• [U-Boot] [U-Boot, v2, 1/2] nand, davinci: add special UBL ecc position   Tom Rini
• [U-Boot] [U-Boot, v2, 1/3] am33xx: elm: add support for BCH16_ECC - ELM driver updates   Scott Wood
• [U-Boot] [U-Boot, v2, 2/2] arm, da85x: update for the ipam390 board   Tom Rini
• [U-Boot] [U-Boot, v2, 2/3] mtd: nand: omap: add support for BCH16_ECC - NAND driver updates   Scott Wood
• [U-Boot] [U-Boot, v2, 2/3] mtd: nand: omap: add support for BCH16_ECC - NAND driver updates   Gupta, Pekon
• [U-Boot] [U-Boot, v2, 2/3] mtd: nand: omap: add support for BCH16_ECC - NAND driver updates   Scott Wood
• [U-Boot] [U-Boot, v2, 2/3] mtd: nand: omap: add support for BCH16_ECC - NAND driver updates   Scott Wood
• [U-Boot] [U-Boot, v2, 4/4] MAKEALL: rename boards_by_* functions to targets_by_*   Tom Rini
• [U-Boot] [U-Boot, v2] common/cmd_bootm.c: fix subcommand processing in OS specific do_bootm_xxx() functions   Tom Rini
• [U-Boot] [U-Boot, v2] Makefile: descend into subdirectories only when CONFIG_API is defined   Tom Rini
• [U-Boot] [U-Boot, v2] Makefile: do not create a symbolic link to arch/${ARCH}/include/asm   Tom Rini
• [U-Boot] [U-Boot, v3, 1/5] bootcount: store bootcount var in environment   Tom Rini
• [U-Boot] [U-Boot, v3, 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h   Tom Rini
• [U-Boot] [U-Boot, v3, 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h   Tom Rini
• [U-Boot] [U-Boot, v3, 2/5] arm, am33x: make RTC32K OSC enable configurable   Tom Rini
• [U-Boot] [U-Boot, v3, 4/5] usb, g_dnl: make bcdDevice value configurable   Tom Rini
• [U-Boot] [U-Boot, v3, 5/5] arm, am335x: update for the siemens boards   Tom Rini
• [U-Boot] [U-Boot, v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework   Heiko Schocher
• [U-Boot] [U-Boot,1/2] arm: atmel: at91sam9n12ek: add usb host support   Andreas Bießmann
• [U-Boot] [U-Boot,1/2] README.scrapyard: fix broken format   Tom Rini
• [U-Boot] [U-Boot,1/6] video: remove AT91 legacy API from bus_vcxk   Andreas Bießmann
• [U-Boot] [U-Boot,2/2] arm: atmel: get rid of too many ifdeffery   Andreas Bießmann
• [U-Boot] [U-Boot,2/2] EP88x: remove remainders of dead board   Tom Rini
• [U-Boot] [U-Boot,2/3] cm_t35: turn on GPIO commands   Tom Rini
• [U-Boot] [U-Boot,2/6] i2c: switch from AT91 legacy to ATMEL legacy   Andreas Bießmann
• [U-Boot] [U-Boot,3/6] at91sam9m10g45ek: remove unused CONFIG_AT91_LEGACY   Andreas Bießmann
• [U-Boot] [U-Boot,4/6] snapper9260: remove unused AT91_LEGACY   Andreas Bießmann
• [U-Boot] [U-Boot,5/6] net: remove unused CONFIG_AT91_LEGACY   Andreas Bießmann
• [U-Boot] [U-Boot,6/6] at91: remove all occourances of CONFIG_AT91_LEGACY   Andreas Bießmann
• [U-Boot] [U-Boot,PATCHv4] Optimized nand_read_buf for kirkwood   Scott Wood
• [U-Boot] [U-Boot,PATCHv4] Optimized nand_read_buf for kirkwood   Holger Brunck
• [U-Boot] [U-Boot,PATCHv4] Optimized nand_read_buf for kirkwood   Phil Sutter
• [U-Boot] [U-Boot,PATCHv4] Optimized nand_read_buf for kirkwood   Scott Wood
• [U-Boot] [U-Boot,v2,1/4] at91: add defines for reset type   Andreas Bießmann
• [U-Boot] [U-Boot,v2,1/4] MAKEALL: fix awk warning message   Tom Rini
• [U-Boot] [U-Boot,V2,3/3] cm_t35: update lcd predefines   Tom Rini
• [U-Boot] [U-Boot,v2,3/4] MAKEALL: fix boards_by_field function   Tom Rini
• [U-Boot] [U-Boot,v2] Add support for SX151x SPI GPIO Expanders   Tom Rini
• [U-Boot] [U-Boot,V2] i2c: mxs_i2c: Squash endless loop   Heiko Schocher
• [U-Boot] [U-Boot,v2] MAKEALL: add -b (--board) option   Tom Rini
• [U-Boot] [U-Boot,v2] nand_util.c: Correct licensing   Tom Rini
• [U-Boot] [U-Boot,V3] ARM: OMAP5: DDR3: Change io settings   Tom Rini
• [U-Boot] [U-Boot,v5,09/11] S3C24XX: Add NAND Flash driver   Scott Wood
• [U-Boot] [U-Boot,v5,09/11] S3C24XX: Add NAND Flash driver   José Miguel Gonçalves
• [U-Boot] [u-boot-release] [PATCH] net/phy: Add Vitesse VSC8514 PHY support   Bhupesh Sharma
• [U-Boot] [u-boot-release] [PATCH] net/phy: Add Vitesse VSC8514 PHY support   Shaohui Xie
• [U-Boot] [u-boot-release] [PATCH] net/phy: Add Vitesse VSC8514 PHY support   Bhupesh Sharma
• [U-Boot] [U-boot] CONFIG_LOGBUFFER and _POST_WORD_ADDR   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot] not support parsing Android's boot.img format ?   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot] not support parsing Android's boot.img format ?   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot] not support parsing Android's boot.img format ?   Albert ARIBAUD
• [U-Boot] [U-boot] raise() function question   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot] uboot support ext4 format command?   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot] uboot support ext4 format command?   Albert ARIBAUD
• [U-Boot] [U-boot] uboot support ext4 format command?   TigerLiu at viatech.com.cn
• [U-Boot] [uBoot] TI: configs: Commonize the boot of different devices   Dan Murphy
• [U-Boot] [UBOOT][PATCH 0/2] misc fix for memory mapped support, dra config   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 0/2] misc fix for memory mapped support, dra config   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 0/5] qspi: Add AM437x support   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 0/5] qspi: Add AM437x support   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 0/5] qspi: Add AM437x support   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 1/2] config: dra7_evm: Add Bank Address Register(BAR) config   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 1/5] am43xx: add qspi support   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 2/2] driver: mtd: sf_ops: claim bus while doing memcpy   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 2/5] am437x_epos_evm: add SPL API, QSPI, and serial flash support   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 3/5] sf: macronix: Add support for MX66L51235F   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 4/5] qspi/spi: Add AM43xx specifics changes   Sourav Poddar
• [U-Boot] [UBOOT][PATCH 5/5] am43xx: add delay before xfer   Sourav Poddar
• [U-Boot] [v4 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver   York Sun
• [U-Boot] [v4 2/6] Driver/DDR: combine ccsr_ddr for 83xx, 85xx and 86xx   York Sun
• [U-Boot] [v4 3/6] Driver/DDR: Add Freescale DDR driver for ARM   York Sun
• [U-Boot] [v4 4/6] powerpc/mpc8xxx: Extend DDR registers' fields   York Sun
• [U-Boot] [v4 5/6] Driver/DDR: Update DDR driver to allow non-zero base address   York Sun
• [U-Boot] [v4 6/6] Driver/IFC: Move Freescale IFC driver to a common driver   York Sun
• [U-Boot] A question about unconfigured pads check in omap24xx_i2c   Lubomir Popov
• [U-Boot] A question about unconfigured pads check in omap24xx_i2c   Heiko Schocher
• [U-Boot] A question about unconfigured pads check in omap24xx_i2c   Lubomir Popov
• [U-Boot] A question about unconfigured pads check in omap24xx_i2c   Heiko Schocher
• [U-Boot] A question about unconfigured pads check in omap24xx_i2c   Lubomir Popov
• [U-Boot] A question about unconfigured pads check in omap24xx_i2c   Nikita Kiryanov
• [U-Boot] A question about unconfigured pads check in omap24xx_i2c   Lubomir Popov
• [U-Boot] A question about unconfigured pads check in omap24xx_i2c   Nikita Kiryanov
• [U-Boot] A question about unconfigured pads check in omap24xx_i2c   Lubomir Popov
• [U-Boot] A question about unconfigured pads check in omap24xx_i2c   Nikita Kiryanov
• [U-Boot] adding NAND support for omap4 (based on pandaboard)   Abraham V.
• [U-Boot] adding NAND support for omap4 (based on pandaboard)   Gupta, Pekon
• [U-Boot] adding NAND support for omap4 (based on pandaboard)   Abraham V.
• [U-Boot] adding NAND support for omap4 (based on pandaboard)   Abraham V.
• [U-Boot] am335x: Enable CONFIG_OMAP_WATCHDOG support   Tom Rini
• [U-Boot] am335x_evm.h   matti kaasinen
• [U-Boot] am335x_evm.h   matti kaasinen
• [U-Boot] am335x_evm: Fix CONS_INDEX numbering   Tom Rini
• [U-Boot] am3517: segmentation fault in Linux after upgrading from arago src to mainline u-boot   Måns Rullgård
• [U-Boot] am3517: segmentation fault in Linux after upgrading from arago src to mainline u-boot   Yegor Yefremov
• [U-Boot] am3517: segmentation fault in Linux after upgrading from arago src to mainline u-boot   Tom Rini
• [U-Boot] am3517: segmentation fault in Linux after upgrading from arago src to mainline u-boot   Yegor Yefremov
• [U-Boot] Any experience with BCM5703 - tg3 in u-boot ?   John Donnelly
• [U-Boot] ARM: am437x: Adapt to common CONFIG_BOOTCMD   Dan Murphy
• [U-Boot] ARM: at91: sama5d3: add support for sama5d36 chip   Andreas Bießmann
• [U-Boot] ARM: ATMEL: eb_cpux9k2: fix TEXT_BASE for ramboot target   Andreas Bießmann
• [U-Boot] ARM: interrupt_init before relocation, write fails   Rob Herring
• [U-Boot] ARM: interrupt_init before relocation, write fails   Albert ARIBAUD
• [U-Boot] ARM: interrupt_init before relocation, write fails   Rob Herring
• [U-Boot] ARM: interrupt_init before relocation, write fails   Joe Kulikauskas
• [U-Boot] ARM: interrupt_init before relocation, write fails   Albert ARIBAUD
• [U-Boot] ARM: OMAP4: Convert to ti_armv7_common.h   Tom Rini
• [U-Boot] arm: U-Boot API - clang support broke ABI   Leif Lindholm
• [U-Boot] arm: U-Boot API - clang support broke ABI   Michal Simek
• [U-Boot] arm: U-Boot API - clang support broke ABI   Tom Rini
• [U-Boot] arm: U-Boot API - clang support broke ABI   Jeroen Hofstee
• [U-Boot] arm: U-Boot API - clang support broke ABI   Jeroen Hofstee
• [U-Boot] arm: U-Boot API - clang support broke ABI   Leif Lindholm
• [U-Boot] bios_emulator: delete an unnecessary include path   Tom Rini
• [U-Boot] board: cogent: include header files in a more natural way   Tom Rini
• [U-Boot] board: Do not add -DCONFIG_SYS_TEXT_BASE in board config.mk   Tom Rini
• [U-Boot] board: h2200: Delete an unnecessary make rule   Tom Rini
• [U-Boot] board: tqm5200: delete its own object make rule   Tom Rini
• [U-Boot] boards.cfg: remove git leftovers   Tom Rini
• [U-Boot] boards.cfg: remove trailing whitespace   Tom Rini
• [U-Boot] boards.cfg: update email address for ti814x_evm maintainer   Tom Rini
• [U-Boot] Can a standalone application send data via Ethernet in U-Boot?   rvijay435
• [U-Boot] Can a standalone application send data via Ethernet in U-Boot?   Wolfgang Denk
• [U-Boot] Choosing toolchain (was: 'Re: Compiling U-Boot')   Andreas Bießmann
• [U-Boot] cm-t35: use gpio_led driver for status led   Tom Rini
• [U-Boot] cmd_eeprom: fix i2c_{read|write} usage if env is in I2C EEPROM   Heiko Schocher
• [U-Boot] cmd_nvedit.c: Add env exists command   Tom Rini
• [U-Boot] cmd_test: fix a compile error on Blackfin   Tom Rini
• [U-Boot] Commit 2108f4c4 causes a warning in 10 ARM boards   Albert ARIBAUD
• [U-Boot] Commit 2108f4c4 causes a warning in 10 ARM boards   Tom Rini
• [U-Boot] Commit 2108f4c4 causes a warning in 10 ARM boards   Albert ARIBAUD
• [U-Boot] common: Delete unnecessary rules.   Tom Rini
• [U-Boot] Compiling fw_printenv tool   Alexey Smishlayev
• [U-Boot] Compiling fw_printenv tool   Detlev Zundel
• [U-Boot] Compiling fw_printenv tool   Alexey Smishlayev
• [U-Boot] Compiling U-Boot   Alexey Smishlayev
• [U-Boot] Compiling U-Boot   Andreas Bießmann
• [U-Boot] Compiling U-Boot   Alexey Smishlayev
• [U-Boot] Compiling U-Boot   Andreas Bießmann
• [U-Boot] config/sandbox: Add EFI and GPT support   Tom Rini
• [U-Boot] config: Add a default CONFIG_SYS_PROMPT   Tom Rini
• [U-Boot] config: Define HAVE_BLOCK_DEVICE when CONFIG_CMD_GPT is set   Tom Rini
• [U-Boot] cosmetic: README.scrapyard: Add eNET board   Tom Rini
• [U-Boot] cosmetic: remove empty lines at the top of file   Tom Rini
• [U-Boot] designware_i2c: disable i2c controller during target address setup   Heiko Schocher
• [U-Boot] designware_i2c: remove 10msec delay in i2c_xfer_finish   Heiko Schocher
• [U-Boot] dra7xx: booting from eMMC raw boot partition   Richard Retanubun
• [U-Boot] dra7xx: booting from eMMC raw boot partition   Shankar Rao
• [U-Boot] dra7xx: booting from eMMC raw boot partition   Michael Pratt
• [U-Boot] dra7xx: booting from eMMC raw boot partition   Richard Retanubun
• [U-Boot] dra7xx: booting from eMMC raw boot partition   Rao, Shankar
• [U-Boot] dra7xx: booting from eMMC raw boot partition   Tom Rini
• [U-Boot] dra7xx: booting from eMMC raw boot partition   Richard Retanubun
• [U-Boot] dra7xx: booting from eMMC raw boot partition   Tom Rini
• [U-Boot] dra7xx: booting from eMMC raw boot partition   Richard Retanubun
• [U-Boot] dra7xx: booting from eMMC raw boot partition   Tom Rini
• [U-Boot] dra7xx_evm: Enabled UART-boot mode and add dra7xx_evm_uart3 build   Tom Rini
• [U-Boot] drivers: delete unnecessary HOSTCFLAGS   Tom Rini
• [U-Boot] env: fix the env export varname   Tom Rini
• [U-Boot] examples: add again x86 standalone example   Tom Rini
• [U-Boot] examples: add again x86 standalone example   Masahiro Yamada
• [U-Boot] examples: add again x86 standalone example   Graeme Russ
• [U-Boot] examples: add again x86 standalone example   Simon Glass
• [U-Boot] examples: add again x86 standalone example   Masahiro Yamada
• [U-Boot] examples: add again x86 standalone example   Wolfgang Denk
• [U-Boot] examples: delete unnecessary CPPFLAGS   Tom Rini
• [U-Boot] examples: remove the remainders of dead board   Tom Rini
• [U-Boot] fatls shows duplicated entries with long and short names   drambo
• [U-Boot] fatls shows duplicated entries with long and short names   Tom Rini
• [U-Boot] fatls shows duplicated entries with long and short names   Wolfgang Denk
• [U-Boot] fatls shows duplicated entries with long and short names   drambo
• [U-Boot] fdt performance   Scott Wood
• [U-Boot] fdt performance   Simon Glass
• [U-Boot] FDT specification documents   Chris Packham
• [U-Boot] FDT specification documents   Scott Wood
• [U-Boot] Festival Shutdown : U-Boot Digest, Vol 66, Issue 1   hemal.patel at slscorp.com
• [U-Boot] Festival Shutdown : U-Boot Digest, Vol 66, Issue 1   Robert P. J. Day
• [U-Boot] Festival Shutdown : U-Boot Digest, Vol 66, Issue 2   hemal.patel at slscorp.com
• [U-Boot] Festival Shutdown : U-Boot Digest, Vol 66, Issue 3   hemal.patel at slscorp.com
• [U-Boot] Festival Shutdown : U-Boot Digest, Vol 66, Issue 4   hemal.patel at slscorp.com
• [U-Boot] freescale: p1_p2_rdb_pc: rename COBJS-y to obj-y   Tom Rini
• [U-Boot] fs:fat: fix set file name function   Tom Rini
• [U-Boot] FW: [PATCH 1/2] drivers/net/designware, do an explicit memory access instead of implicit, re-written assignments to use readl() and writel(), all of this as preperation for making the driver able to work in a cached environment (I$D$ support).   Joe Hershberger
• [U-Boot] fw_setenv device not accessible   pshambhu
• [U-Boot] fw_setenv device not accessible   Wolfgang Denk
• [U-Boot] Getting U-Boot running on Toradex Colibri T20 on Iris board   Andrzej Telszewski
• [U-Boot] Getting U-Boot running on Toradex Colibri T20 on Iris board   Stephen Warren
• [U-Boot] Getting U-Boot running on Toradex Colibri T20 on Iris board   Stefan Agner
• [U-Boot] hash.c: Correct non-hash subcommand crc32 addr-save support   Tom Rini
• [U-Boot] Help needed: Boot signed RTOS   Christopher Preschern
• [U-Boot] Help needed: Boot signed RTOS   Simon Glass
• [U-Boot] Help needed: Boot signed RTOS   Christopher Preschern
• [U-Boot] Help needed: Boot signed RTOS   Simon Glass
• [U-Boot] Help needed: Boot signed RTOS   Christopher Preschern
• [U-Boot] Help needed: Boot signed RTOS   Simon Glass
• [U-Boot] How to build tools/imls ?   Masahiro Yamada
• [U-Boot] How to build tools/updater ?   Masahiro Yamada
• [U-Boot] How to enable FAT fs support and hook up the SD/MMC driver   Djoker
• [U-Boot] How to enable FAT fs support and hook up the SD/MMC driver   Djoker
• [U-Boot] How to enable FAT fs support and hook up the SD/MMC driver   Albert ARIBAUD
• [U-Boot] How to write jffs2 image to spi nor flash?   Axel Lin
• [U-Boot] How to write jffs2 image to spi nor flash?   Axel Lin
• [U-Boot] i.MX6 freeze when running Linux FSL 3.10.9-1.0.0-alpha AND U-Boot 2013.10   Wolfgang Denk
• [U-Boot] i.MX6 freeze when running Linux FSL 3.10.9-1.0.0-alpha AND U-Boot 2013.10   Wolfgang Denk
• [U-Boot] i.MX6 freeze when running Linux FSL 3.10.9-1.0.0-alpha AND U-Boot 2013.10   Otavio Salvador
• [U-Boot] i.MX6 freeze when running Linux FSL 3.10.9-1.0.0-alpha AND U-Boot 2013.10   Eric Bénard
• [U-Boot] i.MX6 freeze when running Linux FSL 3.10.9-1.0.0-alpha AND U-Boot 2013.10   Otavio Salvador
• [U-Boot] i.MX6 freeze when running Linux FSL 3.10.9-1.0.0-alpha AND U-Boot 2013.10   Otavio Salvador
• [U-Boot] i.MX6 freeze when running Linux FSL 3.10.9-1.0.0-alpha AND U-Boot 2013.10   Eric Bénard
• [U-Boot] i.MX6 freeze when running Linux FSL 3.10.9-1.0.0-alpha AND U-Boot 2013.10   Otavio Salvador
• [U-Boot] i.MX6 freeze when running Linux FSL 3.10.9-1.0.0-alpha AND U-Boot 2013.10   Otavio Salvador
• [U-Boot] i2c issues with efikamx and mainline uboot   Konstantinos Margaritis
• [U-Boot] i2c issues with efikamx and mainline uboot   Marek Vasut
• [U-Boot] i2c issues with efikamx and mainline uboot   Benoît Thébaudeau
• [U-Boot] i2c issues with efikamx and mainline uboot   Fabio Estevam
• [U-Boot] i2c issues with efikamx and mainline uboot   Konstantinos Margaritis
• [U-Boot] i2c issues with efikamx and mainline uboot   Benoît Thébaudeau
• [U-Boot] i2c, omap1510: remove i2c driver   Heiko Schocher
• [U-Boot] i2c, zynq: convert zynq i2c driver to new multibus/multiadapter framework   Heiko Schocher
• [U-Boot] imx233   Marek Vasut
• [U-Boot] include: delete include/linux/config.h   Tom Rini
• [U-Boot] kup: Delete an unused Makefile   Tom Rini
• [U-Boot] linkstation_HGLAN and MPC824x support   Tom Rini
• [U-Boot] livetime of boards   Heiko Schocher
• [U-Boot] livetime of boards   Tom Rini
• [U-Boot] livetime of boards   Wolfgang Denk
• [U-Boot] livetime of boards   Heiko Schocher
• [U-Boot] livetime of boards   Andreas Bießmann
• [U-Boot] livetime of boards   Heiko Schocher
• [U-Boot] livetime of boards   Albert ARIBAUD
• [U-Boot] livetime of boards   Andreas Bießmann
• [U-Boot] livetime of boards   Heiko Schocher
• [U-Boot] livetime of boards   Heiko Schocher
• [U-Boot] livetime of boards   Wolfgang Denk
• [U-Boot] livetime of boards   Wolfgang Denk
• [U-Boot] livetime of boards   Wolfgang Denk
• [U-Boot] livetime of boards   Andreas Bießmann
• [U-Boot] livetime of boards   Heiko Schocher
• [U-Boot] livetime of boards   Heiko Schocher
• [U-Boot] livetime of boards   Heiko Schocher
• [U-Boot] livetime of boards   Tom Rini
• [U-Boot] livetime of boards   Andreas Bießmann
• [U-Boot] livetime of boards   Wolfgang Denk
• [U-Boot] livetime of boards   Wolfgang Denk
• [U-Boot] livetime of boards   Wolfgang Denk
• [U-Boot] livetime of boards   Tom Rini
• [U-Boot] livetime of boards   Wolfgang Denk
• [U-Boot] livetime of boards   Heiko Schocher
• [U-Boot] livetime of boards   Heiko Schocher
• [U-Boot] livetime of boards   Heiko Schocher
• [U-Boot] livetime of boards   Heiko Schocher
• [U-Boot] livetime of boards   Wolfgang Denk
• [U-Boot] livetime of boards   Heiko Schocher
• [U-Boot] livetime of boards   Wolfgang Denk
• [U-Boot] Location of Titanium board   Fabio Estevam
• [U-Boot] Location of Titanium board   Stefan Roese
• [U-Boot] Location of Titanium board   Peter Korsgaard
• [U-Boot] Makefile: descend into subdirectories only when CONFIG_API is defined   Tom Rini
• [U-Boot] Makefile: move some libraries to lib/Makefile   Tom Rini
• [U-Boot] Makfile: fix a rule to build u-boot.sb   Tom Rini
• [U-Boot] Many Blackfin boards are broken   Masahiro Yamada
• [U-Boot] Many Blackfin boards are broken   Sonic Zhang
• [U-Boot] Many Blackfin boards are broken   Masahiro Yamada
• [U-Boot] Microblaze and Sparc boards are broken because of common timer func   Masahiro Yamada
• [U-Boot] Microblaze and Sparc boards are broken because of common timer func   Masahiro Yamada
• [U-Boot] Microblaze and Sparc boards are broken because of common timer func   Masahiro Yamada
• [U-Boot] Microblaze and Sparc boards are broken because of common timer func   Masahiro Yamada
• [U-Boot] Microblaze and Sparc boards are broken because of common timer func   Michal Simek
• [U-Boot] Microblaze and Sparc boards are broken because of common timer func   Michal Simek
• [U-Boot] Microblaze and Sparc boards are broken because of common timer func   Rob Herring
• [U-Boot] Microblaze and Sparc boards are broken because of common timer func   Michal Simek
• [U-Boot] Microblaze and Sparc boards are broken because of common timer func   Michal Simek
• [U-Boot] Microblaze and Sparc boards are broken because of common timer func   Michal Simek
• [U-Boot] Microblaze and Sparc boards are broken because of common timer func   Tom Rini
• [U-Boot] Microblaze and Sparc boards are broken because of common timer func   Michal Simek
• [U-Boot] Minutes from the U-Boot Mini Summit 2013   Detlev Zundel
• [U-Boot] mmc support for mpc8377   Ellis Andrew
• [U-Boot] MPC83xx: asm/arch/sys_proto.h: No such file or directory   Richard Retanubun
• [U-Boot] MPC8641D stucks before relocation   Ashish
• [U-Boot] MPC8641D stucks before relocation   York Sun
• [U-Boot] mx28: disable DCDC-converter and use internal linear regulators   Mårten Wikman
• [U-Boot] mx28: Error: unrecognized/unsupported processor variant (0x41069265).   Måns Rullgård
• [U-Boot] mx28: Error: unrecognized/unsupported processor variant (0x41069265).   Mårten Wikman
• [U-Boot] mx28: Error: unrecognized/unsupported processor variant (0x41069265).   Måns Rullgård
• [U-Boot] mx28: Error: unrecognized/unsupported processor variant (0x41069265).   Mårten Wikman
• [U-Boot] mx28: Error: unrecognized/unsupported processor variant (0x41069265).   Måns Rullgård
• [U-Boot] mx28: Error: unrecognized/unsupported processor variant (0x41069265).   Mårten Wikman
• [U-Boot] mx28: Error: unrecognized/unsupported processor variant (0x41069265).   Måns Rullgård
• [U-Boot] mx28: Error: unrecognized/unsupported processor variant (0x41069265).   Mårten Wikman
• [U-Boot] mx28: Error: unrecognized/unsupported processor variant (0x41069265).   Mårten Wikman
• [U-Boot] NAND BBI swap on iMX53   Luca Ellero
• [U-Boot] Nand ECC layout   Yegor Yefremov
• [U-Boot] nand_spl: trivial refactoring of makefiles   Tom Rini
• [U-Boot] net: macb: get DMA bus width from design config register   Andreas Bießmann
• [U-Boot] nios2: remove unnecessary header include path   Tom Rini
• [U-Boot] No single character output after update to latest u-boot on pandaboard   Chao Xu
• [U-Boot] No single character output after update to latest u-boot on pandaboard   Abraham V.
• [U-Boot] No single character output after update to latest u-boot on pandaboard   Chao Xu
• [U-Boot] No single character output after update to latest u-boot on pandaboard   Abraham V.
• [U-Boot] No single character output after update to latest u-boot on pandaboard   Chao Xu
• [U-Boot] No single character output after update to latest u-boot on pandaboard   Abraham V.
• [U-Boot] No single character output after update to latest u-boot on pandaboard   Lokesh Vutla
• [U-Boot] No single character output after update to latest u-boot on pandaboard   Chao Xu
• [U-Boot] No single character output after update to latest u-boot on pandaboard   Lokesh Vutla
• [U-Boot] No single character output after update to latest u-boot on pandaboard   Abraham V.
• [U-Boot] No single character output after update to latest u-boot on pandaboard   Tom Rini
• [U-Boot] No single character output after update to latest u-boot on pandaboard   Lokesh Vutla
• [U-Boot] Non-trivial merge conflicts between u-boot/master and u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Non-trivial merge conflicts between u-boot/master and u-boot-arm/master   Tom Rini
• [U-Boot] Non-trivial merge conflicts between u-boot/master and u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Non-trivial merge conflicts between u-boot/master and u-boot-arm/master   Tom Rini
• [U-Boot] Non-trivial merge conflicts between u-boot/master and u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Non-trivial merge conflicts between u-boot/master and u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Non-trivial merge conflicts between u-boot/master and u-boot-arm/master   Tom Rini
• [U-Boot] Non-trivial merge conflicts between u-boot/master and u-boot-arm/master   Gerhard Sittig
• [U-Boot] Non-trivial merge conflicts between u-boot/master and u-boot-arm/master   Tom Rini
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Thomas Petazzoni
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Enric Balletbo Serra
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Thomas Petazzoni
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Enric Balletbo Serra
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Tom Rini
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Andreas Bießmann
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Nikita Kiryanov
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Nikita Kiryanov
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Thomas Petazzoni
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Thomas Petazzoni
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Michael Trimarchi
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Nikita Kiryanov
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Lubomir Popov
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Thomas Petazzoni
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Tom Rini
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Nikita Kiryanov
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Enric Balletbo Serra
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Lubomir Popov
• [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10   Nikita Kiryanov
• [U-Boot] patchwork does not pick my patch   Masahiro Yamada
• [U-Boot] patchwork does not pick my patch   Andreas Bießmann
• [U-Boot] patchwork does not pick my patch   Jeremy Kerr
• [U-Boot] patchwork does not pick my patch   Masahiro Yamada
• [U-Boot] patchwork does not pick my patch   Masahiro Yamada
• [U-Boot] patman drops Cc tag   Masahiro Yamada
• [U-Boot] patman drops Cc tag   Simon Glass
• [U-Boot] patman drops Cc tag   Masahiro Yamada
• [U-Boot] patman drops Cc tag   Otavio Salvador
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] Please pull u-boot-ti/master, v2   Tom Rini
• [U-Boot] Please pull u-boot-ti/master, v2   Albert ARIBAUD
• [U-Boot] Please pull u-boot-x86 (sandbox)   Simon Glass
• [U-Boot] Please pull u-boot-x86 (sandbox)   Tom Rini
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] post: remove unnecessary include path settings   Tom Rini
• [U-Boot] Pull request - arm/zynq   Michal Simek
• [U-Boot] Pull request - arm/zynq   Albert ARIBAUD
• [U-Boot] Pull request - arm/zynq   Michal Simek
• [U-Boot] Pull request - arm/zynq   Albert ARIBAUD
• [U-Boot] Pull request - fpga   Michal Simek
• [U-Boot] Pull request - fpga   Tom Rini
• [U-Boot] Pull request for u-boot-marvell.git   Holger Brunck
• [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] Pull request: nand flash   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] Pull request: u-boot-blackfin   Sonic Zhang
• [U-Boot] Pull request: u-boot-blackfin   Tom Rini
• [U-Boot] Pull request: u-boot-coldfire   Zhengxiong Jin
• [U-Boot] Pull request: u-boot-coldfire   Tom Rini
• [U-Boot] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-mmc 31102013   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] Pull request: u-boot-ti   Tom Rini
• [U-Boot] Pull request: u-boot-ti   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-video/master   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-video/master   Tom Rini
• [U-Boot] pull-request: u-boot-mpc85xx/master   York Sun
• [U-Boot] pull-request: u-boot-mpc85xx/master   Tom Rini
• [U-Boot] pull-request: u-boot-mpc85xx/master   York Sun
• [U-Boot] pxe: fix handling of absolute paths   Tom Rini
• [U-Boot] Question about patman   Masahiro Yamada
• [U-Boot] Question about patman   Albert ARIBAUD
• [U-Boot] Question about patman   Masahiro Yamada
• [U-Boot] Question about patman   Otavio Salvador
• [U-Boot] Question re HYP mode and IRQ/FIQ stack setting   Albert ARIBAUD
• [U-Boot] Question re HYP mode and IRQ/FIQ stack setting   Christoffer Dall
• [U-Boot] Question re HYP mode and IRQ/FIQ stack setting   Andre Przywara
• [U-Boot] Question re HYP mode and IRQ/FIQ stack setting   Christoffer Dall
• [U-Boot] Question re HYP mode and IRQ/FIQ stack setting   Albert ARIBAUD
• [U-Boot] Question re HYP mode and IRQ/FIQ stack setting   Christoffer Dall
• [U-Boot] Question re HYP mode and IRQ/FIQ stack setting   Albert ARIBAUD
• [U-Boot] Question re HYP mode and IRQ/FIQ stack setting   Christoffer Dall
• [U-Boot] ralink RT3052 5X flash memory map   RdrouterUboot Router
• [U-Boot] ralink RT3052 5X flash memory map   Nikolaos Pasaloukos
• [U-Boot] README: remove wrong config name   Tom Rini
• [U-Boot] Remove <<<<<< HEAD from boards.cfg   Tom Rini
• [U-Boot] sandbox is broken again   Masahiro Yamada
• [U-Boot] sandbox is broken again   Simon Glass
• [U-Boot] sandbox is broken again   Tom Rini
• [U-Boot] sandbox is broken again   Simon Glass
• [U-Boot] sending data from ram to host machin in u-boot   tvpatel12
• [U-Boot] sending data from ram to host machin in u-boot   James W.
• [U-Boot] sending data from ram to host machin in u-boot   Wolfgang Denk
• [U-Boot] sending data from ram to host machin in u-boot   tvpatel12
• [U-Boot] sending data from ram to host machin in u-boot   James W.
• [U-Boot] sending data from ram to host machin in u-boot   Wolfgang Denk
• [U-Boot] serial: mxs_auart: Staticize local functions   Tom Rini
• [U-Boot] soft i2c behaviour on address not <ACK>ed   Eibach, Dirk
• [U-Boot] soft i2c behaviour on address not <ACK>ed   Heiko Schocher
• [U-Boot] soft vs. hard float   Saridakis, Dean (US SSA)
• [U-Boot] soft vs. hard float   Wolfgang Denk
• [U-Boot] soft vs. hard float   Wolfgang Denk
• [U-Boot] Some SuperH boards are broken   Masahiro Yamada
• [U-Boot] Some SuperH boards are broken   Nobuhiro Iwamatsu
• [U-Boot] Some SuperH boards are broken   Masahiro Yamada
• [U-Boot] sparc: include config.h to start.S   Tom Rini
• [U-Boot] SPI and I2C EEPROM   Aaron Williams
• [U-Boot] SPI and I2C EEPROM   Aaron Williams
• [U-Boot] SPI and I2C EEPROM   Heiko Schocher
• [U-Boot] spieval: Remove remainders of dead board   Tom Rini
• [U-Boot] SPL Dfu update   Michael Trimarchi
• [U-Boot] standalone u-boot app - bootm issue was the part of: (Re: arm: U-Boot API - clang support broke ABI)   Michal Simek
• [U-Boot] standalone u-boot app - bootm issue was the part of: (Re: arm: U-Boot API - clang support broke ABI)   Tom Rini
• [U-Boot] standalone u-boot app - bootm issue was the part of: (Re: arm: U-Boot API - clang support broke ABI)   Michal Simek
• [U-Boot] standalone u-boot app - bootm issue was the part of: (Re: arm: U-Boot API - clang support broke ABI)   Tom Rini
• [U-Boot] standalone u-boot app - bootm issue was the part of: (Re: arm: U-Boot API - clang support broke ABI)   Michal Simek
• [U-Boot] Strange UBI problems   Gary Thomas
• [U-Boot] Strange UBI problems   Gary Thomas
• [U-Boot] test   Igor Grinberg
• [U-Boot] tg3 (bcm570x) port available for uboot ?   John Donnelly
• [U-Boot] TI:armv7: Change CONFIG_SYS_SPL_ARGS_ADDR to a higher address   Tom Rini
• [U-Boot] TI:omap5: Add rdaddr, use consistent loadaddr values   Tom Rini
• [U-Boot] time: fix gcc warnings on MIPS64   Tom Rini
• [U-Boot] toolchain problems when building iMX6 mx6qsabreauto (and another bootloader tool)   Wolfgang Denk
• [U-Boot] toolchain problems when building iMX6 mx6qsabreauto (and another bootloader tool)   Wolfgang Denk
• [U-Boot] toolchain problems when building iMX6 mx6qsabreauto (and another bootloader tool)   Abraham V.
• [U-Boot] toolchain problems when building iMX6 mx6qsabreauto (and another bootloader tool)   Stefano Babic
• [U-Boot] toolchain problems when building iMX6 mx6qsabreauto (and another bootloader tool)   Abraham V.
• [U-Boot] toolchain problems when building iMX6 mx6qsabreauto (and another bootloader tool)   Christian Gmeiner
• [U-Boot] tools: imls: Remove a broken and unused tool.   Tom Rini
• [U-Boot] tools: updater: Remove remainders of dead board   Tom Rini
• [U-Boot] tr   Frank Ihle
• [U-Boot] tr   Bo Shen
• [U-Boot] u-boot gerrit server   Vadim Bendebury (вб)
• [U-Boot] u-boot gerrit server   Simon Glass
• [U-Boot] u-boot gerrit server   Albert ARIBAUD
• [U-Boot] u-boot gerrit server   Otavio Salvador
• [U-Boot] u-boot gerrit server   Vadim Bendebury (вб)
• [U-Boot] u-boot gerrit server   Vadim Bendebury (вб)
• [U-Boot] u-boot gerrit server   Otavio Salvador
• [U-Boot] u-boot gerrit server   Vadim Bendebury (вб)
• [U-Boot] u-boot gerrit server   Otavio Salvador
• [U-Boot] u-boot gerrit server   Vadim Bendebury (вб)
• [U-Boot] u-boot gerrit server   Albert ARIBAUD
• [U-Boot] u-boot gerrit server   Albert ARIBAUD
• [U-Boot] u-boot gerrit server   Otavio Salvador
• [U-Boot] u-boot gerrit server   Otavio Salvador
• [U-Boot] u-boot gerrit server   Albert ARIBAUD
• [U-Boot] u-boot gerrit server   Vadim Bendebury (вб)
• [U-Boot] u-boot gerrit server   Otavio Salvador
• [U-Boot] u-boot gerrit server   Vadim Bendebury
• [U-Boot] u-boot gerrit server   Albert ARIBAUD
• [U-Boot] u-boot gerrit server   Wolfgang Denk
• [U-Boot] u-boot gerrit server   Wolfgang Denk
• [U-Boot] u-boot gerrit server   Vadim Bendebury (вб)
• [U-Boot] u-boot gerrit server   Scott Wood
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Otavio Salvador
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Otavio Salvador
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Vadim Bendebury (вб)
• [U-Boot] u-boot gerrit server   Otavio Salvador
• [U-Boot] u-boot gerrit server   Vadim Bendebury (вб)
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Otavio Salvador
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Otavio Salvador
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Vadim Bendebury (вб)
• [U-Boot] u-boot gerrit server   James Chargin
• [U-Boot] u-boot gerrit server   Oliver Schinagl
• [U-Boot] u-boot gerrit server   Luca Ellero
• [U-Boot] u-boot gerrit server   Wolfgang Denk
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Michal Suchanek
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Wolfgang Denk
• [U-Boot] u-boot gerrit server   Wolfgang Denk
• [U-Boot] u-boot gerrit server   Wolfgang Denk
• [U-Boot] u-boot gerrit server   Otavio Salvador
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Michal Suchanek
• [U-Boot] u-boot gerrit server   Wolfgang Denk
• [U-Boot] u-boot gerrit server   Wolfgang Denk
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Graeme Russ
• [U-Boot] u-boot gerrit server   Michal Suchanek
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Wolfgang Denk
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Heiko Schocher
• [U-Boot] u-boot gerrit server   Wolfgang Denk
• [U-Boot] u-boot gerrit server   Tom Rini
• [U-Boot] u-boot gerrit server   Vadim Bendebury (вб)
• [U-Boot] u-boot gerrit server   Heiko Schocher
• [U-Boot] u-boot gerrit server   Heiko Schocher
• [U-Boot] u-boot gerrit server   Graeme Russ
• [U-Boot] u-boot gerrit server   Vadim Bendebury (вб)
• [U-Boot] U-Boot Mini Summit slides [was: Minutes from the U-Boot Mini Summit 2013]   Detlev Zundel
• [U-Boot] Which u-boot tree to start for dra7xx_evm   Richard Retanubun
• [U-Boot] Which u-boot tree to start for dra7xx_evm   Tom Rini