[U-Boot] [PATCH] serial: lpc32xx: send CR before LF

[Vladimir Zapolskiy]

On 11/30/13 17:42, Marek Vasut wrote:
> Dear Vladimir Zapolskiy,
>
>> For LPC32XX high-speed UART it is required to send a carriage return
>> symbol along with line feed.
>
> Why ?
>
>> The problem was introduced in e503f90a
>> commit.
>>
>> Signed-off-by: Vladimir Zapolskiy<vz at mleia.com>
>> Cc: Marek Vasut<marex at denx.de>
>> ---
>>   drivers/serial/lpc32xx_hsuart.c |    3 +++
>>   1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/serial/lpc32xx_hsuart.c
>> b/drivers/serial/lpc32xx_hsuart.c index 9c7c621..c8926a8 100644
>> --- a/drivers/serial/lpc32xx_hsuart.c
>> +++ b/drivers/serial/lpc32xx_hsuart.c
>> @@ -38,6 +38,9 @@ static int lpc32xx_serial_getc(void)
>>
>>   static void lpc32xx_serial_putc(const char c)
>>   {
>> +	if (c == '\n')
>> +		serial_putc('\r');
>> +
>>   	writel(c,&hsuart->tx);
>>
>>   	/* Wait for character to be sent */
>
> btw. I have a feeling each and every driver does send CR-LF combo and emulates
> it this way. Maybe this should eventually go into common code ? But that's just
> a suggestion for future improvement.

No objections from my side, however it seems that not every particular 
serial
controller requires such a hook, for code generalization it may be good 
to have
it for all drivers, but strict enforcement may be redundant for some subset.

>
> Best regards,
> Marek Vasut

With best wishes,
Vladimir