[U-Boot] [PATCH 3/4] udoo: Adjust default boot envirnment

[Giuseppe Pagano]

Change u-boot default environment for uDoo board to:
  - mount /dev/mmcblk0p1 partition
  - activate hdmi monitor by default (instead of nothing)

Signed-off-by: Giuseppe Pagano <giuseppe.pagano at seco.com>
Cc: sbabic at denx.de

---

diff -uNr a/include/configs/udoo.h b/include/configs/udoo.h
--- a/include/configs/udoo.h	2013-11-06 18:51:57.000000000 +0100
+++ b/include/configs/udoo.h	2013-11-06 18:52:16.000000000 +0100
@@ -100,7 +100,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
-	"uimage=uImage\0" \
+	"uimage=/boot/uImage\0" \
 	"console=ttymxc1\0" \
 	"splashpos=m,m\0" \
 	"fdt_high=0xffffffff\0" \
@@ -111,7 +111,7 @@
 	"ip_dyn=yes\0" \
 	"mmcdev=0\0" \
 	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+	"mmcroot=/dev/mmcblk0p1 rootwait rw\0" \
 	"update_sd_firmware_filename=u-boot.imx\0" \
 	"update_sd_firmware=" \
 		"if test ${ip_dyn} = yes; then " \
@@ -127,13 +127,14 @@
 			"fi; "  \
 		"fi\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
+		"root=${mmcroot} rootwait rw " \
+		"fbmem=24M video=mxcfb0:dev=hdmi,1920x1080M at 60,if=RGB24\0" \
 	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0"
\
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"loaduimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0"
\
+	"loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0"
\
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
@@ -189,7 +190,7 @@
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT             "=> "
+#define CONFIG_SYS_PROMPT		"uDoo board >"
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              256