[U-Boot] [PATCH 17/34] zynq: zc70x: Add Catalyst 24WC08 EEPROM config support

Jagannadha Sutradharudu Teki jagannadha.sutradharudu-teki at xilinx.com
Tue Nov 5 18:46:38 CET 2013


Adds configurations for Catalyst 24WC08 EEPROM, which
is present on the zynq boards.

Enable EEPROM support for zc70x boards.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
---
 include/configs/zynq-common.h | 10 ++++++++++
 include/configs/zynq_zc70x.h  |  1 +
 2 files changed, 11 insertions(+)

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index e702820..6b8b6c4 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -108,6 +108,16 @@
 # define CONFIG_SYS_I2C_SLAVE		1
 #endif
 
+/* EEPROM */
+#ifdef CONFIG_ZYNQ_EEPROM
+# define CONFIG_CMD_EEPROM
+# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+# define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
+# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+# define CONFIG_SYS_EEPROM_SIZE			1024 /* Bytes */
+#endif
+
 #define CONFIG_BOOTP_SERVERIP
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h
index a273005..e928ceb 100644
--- a/include/configs/zynq_zc70x.h
+++ b/include/configs/zynq_zc70x.h
@@ -21,6 +21,7 @@
 #define CONFIG_ZYNQ_QSPI
 #define CONFIG_ZYNQ_SDHCI0
 #define CONFIG_ZYNQ_I2C0
+#define CONFIG_ZYNQ_EEPROM
 #define CONFIG_ZYNQ_BOOT_FREEBSD
 
 #include <configs/zynq-common.h>
-- 
1.8.3




More information about the U-Boot mailing list