[U-Boot] [PATCH 3/4] board:trats2: fix access to samsung registers
Piotr Wilczek
p.wilczek at samsung.com
Wed Nov 27 11:11:01 CET 2013
This patch use 'samsung_get_base' common functions to access registers.
Signed-off-by: Piotr Wilczek <p.wilczek at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
CC: Minkyu Kang <mk7.kang at samsung.com>
---
board/samsung/trats2/trats2.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c
index b932a60..9552522 100644
--- a/board/samsung/trats2/trats2.c
+++ b/board/samsung/trats2/trats2.c
@@ -43,7 +43,7 @@ static void check_hw_revision(void)
int modelrev = 0;
int i;
- gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE;
+ gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
/*
* GPM1[1:0]: MODEL_REV[1:0]
@@ -93,7 +93,7 @@ static inline u32 get_model_rev(void)
static void board_external_gpio_init(void)
{
- gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE;
+ gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
/*
* some pins which in alive block are connected with external pull-up
@@ -118,8 +118,8 @@ static void board_external_gpio_init(void)
#ifdef CONFIG_SYS_I2C_INIT_BOARD
static void board_init_i2c(void)
{
- gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE;
- gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE;
+ gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
+ gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
/* I2C_7 */
s5p_gpio_direction_output(&gpio1->d0, 2, 1);
@@ -150,7 +150,7 @@ static int pmic_init_max77686(void);
int board_init(void)
{
struct exynos4_power *pwr =
- (struct exynos4_power *)EXYNOS4X12_POWER_BASE;
+ (struct exynos4_power *)samsung_get_base_power();
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
@@ -257,7 +257,7 @@ int board_mmc_init(bd_t *bis)
{
int err0, err2 = 0;
- gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE;
+ gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
/* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
s5p_gpio_direction_output(&gpio2->k0, 2, 1);
@@ -513,7 +513,7 @@ void exynos_lcd_power_on(void)
{
struct pmic *p = pmic_get("MAX77686_PMIC");
- gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE;
+ gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
/* LCD_2.2V_EN: GPC0[1] */
s5p_gpio_set_pull(&gpio1->c0, 1, GPIO_PULL_UP);
@@ -527,7 +527,7 @@ void exynos_lcd_power_on(void)
void exynos_reset_lcd(void)
{
- gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE;
+ gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
/* reset lcd */
s5p_gpio_direction_output(&gpio1->f2, 1, 0);
--
1.7.9.5
More information about the U-Boot
mailing list