[U-Boot] [PATCH v10 2/4] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform

Gupta, Pekon pekon at ti.com
Wed Nov 20 05:09:30 CET 2013


> From: Scott Wood [mailto:scottwood at freescale.com]
> On Mon, 2013-11-18 at 19:03 +0530, Pekon Gupta wrote:
> > @@ -763,77 +903,47 @@ static void __maybe_unused
> omap_free_bch(struct mtd_info *mtd)
> >   * @eccstrength		- the number of bits that could be corrected
> >   *			  (1 - hamming, 4 - BCH4, 8 - BCH8, 16 - BCH16)
> >   */
> > -void omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength)
> > +int __maybe_unused omap_nand_switch_ecc(uint32_t hardware,
> uint32_t eccstrength)
> >  {
> >  	struct nand_chip *nand;
> >  	struct mtd_info *mtd;
> > +	struct nand_bch_priv *bch;
> > +	int err = 0;
> 
> bch gives unused warning
> 
Sorry, I would have missed it.. I would clean this.


> I tried to see if the warning goes away later, but patch 3/4 doesn't
> apply cleanly.  What tree is this patchset against?
> 
These patches should apply cleanly on 
	git://git.denx.de/u-boot.git  master
Do you have any other tree on which you want me to re-base ?


with regards, pekon


More information about the U-Boot mailing list