[U-Boot] [PATCH v2] mx6sabresd: Fix wrong colors in LVDS splash

Fabio Estevam fabio.estevam at freescale.com
Mon Nov 25 13:34:26 CET 2013


Currently HDMI splash screen is selected by default on mx6sabresd boards.

As LVDS is also enabled, this causes incorrect colors to be displayed im the 
LVDS panel.

Fix this by selecting the LVDS panel as the default splash output and only keep
HDMI or LVDS turned on at the same time.

Acked-by: Liu Ying <Ying.Liu at freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v1:
- Disable both LDB channels

 board/freescale/mx6sabresd/mx6sabresd.c | 31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 1ecedac..7e5bdf7 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -249,8 +249,22 @@ static int detect_hdmi(struct display_info_t const *dev)
 	return readb(&hdmi->phy_stat0) & HDMI_DVI_STAT;
 }
 
+
+static void disable_lvds(struct display_info_t const *dev)
+{
+	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+	int reg = readl(&iomux->gpr[2]);
+
+	reg &= ~(IOMUXC_GPR2_LVDS_CH0_MODE_MASK |
+		 IOMUXC_GPR2_LVDS_CH1_MODE_MASK);
+
+	writel(reg, &iomux->gpr[2]);
+}
+
 static void do_enable_hdmi(struct display_info_t const *dev)
 {
+	disable_lvds(dev);
 	imx_enable_hdmi_phy();
 }
 
@@ -263,14 +277,15 @@ static void enable_lvds(struct display_info_t const *dev)
 	       IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT;
 	writel(reg, &iomux->gpr[2]);
 }
+
 static struct display_info_t const displays[] = {{
 	.bus	= -1,
 	.addr	= 0,
-	.pixfmt	= IPU_PIX_FMT_RGB24,
-	.detect	= detect_hdmi,
-	.enable	= do_enable_hdmi,
+	.pixfmt	= IPU_PIX_FMT_LVDS666,
+	.detect	= NULL,
+	.enable	= enable_lvds,
 	.mode	= {
-		.name           = "HDMI",
+		.name           = "Hannstar-XGA",
 		.refresh        = 60,
 		.xres           = 1024,
 		.yres           = 768,
@@ -286,11 +301,11 @@ static struct display_info_t const displays[] = {{
 } }, {
 	.bus	= -1,
 	.addr	= 0,
-	.pixfmt	= IPU_PIX_FMT_LVDS666,
-	.detect	= NULL,
-	.enable	= enable_lvds,
+	.pixfmt	= IPU_PIX_FMT_RGB24,
+	.detect	= detect_hdmi,
+	.enable	= do_enable_hdmi,
 	.mode	= {
-		.name           = "Hannstar-XGA",
+		.name           = "HDMI",
 		.refresh        = 60,
 		.xres           = 1024,
 		.yres           = 768,
-- 
1.8.1.2




More information about the U-Boot mailing list