[U-Boot] [PATCH v4 3/3] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board
Alban Bedel
alban.bedel at avionic-design.de
Wed Nov 13 17:27:20 CET 2013
Add support for the new Tamonten™ NG platform from Avionic Design.
Currently only I2C, MMC, USB and ethernet have been tested.
Signed-off-by: Alban Bedel <alban.bedel at avionic-design.de>
---
V3: * Removed the retries from pmu_write()
* Removed the not strictly needed power init
V4: * Removed the unused PMU defines
* Removed the useless #ifdef
* Reworked the DTS to enable the device at the proper level
* Re-numbered the i2c bus to match the kernel numbering
Signed-off-by: Alban Bedel <alban.bedel at avionic-design.de>
---
.../common/pinmux-config-tamonten-ng.h | 385 +++++++++++++++++++++
board/avionic-design/common/tamonten-ng.c | 85 +++++
board/avionic-design/dts/tegra30-tamonten.dtsi | 69 ++++
board/avionic-design/dts/tegra30-tec-ng.dts | 18 +
board/avionic-design/tec-ng/Makefile | 32 ++
boards.cfg | 1 +
include/configs/tec-ng.h | 84 +++++
7 files changed, 674 insertions(+)
create mode 100644 board/avionic-design/common/pinmux-config-tamonten-ng.h
create mode 100644 board/avionic-design/common/tamonten-ng.c
create mode 100644 board/avionic-design/dts/tegra30-tamonten.dtsi
create mode 100644 board/avionic-design/dts/tegra30-tec-ng.dts
create mode 100644 board/avionic-design/tec-ng/Makefile
create mode 100644 include/configs/tec-ng.h
diff --git a/board/avionic-design/common/pinmux-config-tamonten-ng.h b/board/avionic-design/common/pinmux-config-tamonten-ng.h
new file mode 100644
index 0000000..39df731
--- /dev/null
+++ b/board/avionic-design/common/pinmux-config-tamonten-ng.h
@@ -0,0 +1,385 @@
+/*
+ * (C) Copyright 2013
+ * Avionic Design GmbH <www.avionic-design.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _PINMUX_CONFIG_TAMONTEN_NG_H_
+#define _PINMUX_CONFIG_TAMONTEN_NG_H_
+
+#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_DEFAULT, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define I2C_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_##_od, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define LV_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_##_ioreset \
+ }
+
+#define DEFAULT_PADCFG(_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+ { \
+ .padgrp = PDRIVE_PINGROUP_##_padgrp, \
+ .slwf = _slwf, \
+ .slwr = _slwr, \
+ .drvup = _drvup, \
+ .drvdn = _drvdn, \
+ .lpmd = PGRP_LPMD_##_lpmd, \
+ .schmt = PGRP_SCHMT_##_schmt, \
+ .hsm = PGRP_HSM_##_hsm, \
+ }
+
+static struct pingroup_config tamonten_ng_pinmux_common[] = {
+ /* SDMMC1 pinmux */
+ DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT),
+
+ /* SDMMC3 pinmux */
+ DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT4, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT5, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT6, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT7, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_IORDY, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS6_N, RSVD1, UP, NORMAL, INPUT),
+
+ /* SDMMC4 pinmux */
+ LV_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_RST_N, RSVD1, DOWN, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* I2C1 pinmux */
+ I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* I2C2 pinmux */
+ I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* I2C3 pinmux */
+ I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* I2C4 pinmux */
+ I2C_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* Power I2C pinmux */
+ I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* UART1 */
+ DEFAULT_PINMUX(ULPI_DATA0, UARTA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DATA1, UARTA, NORMAL, NORMAL, INPUT),
+
+ /* UART2 */
+ DEFAULT_PINMUX(UART2_RXD, UARTB, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_TXD, UARTB, NORMAL, NORMAL, OUTPUT),
+
+ /* UART3 */
+ DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT),
+
+ /* UART4 */
+ DEFAULT_PINMUX(ULPI_CLK, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DIR, UARTD, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_NXT, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_STP, UARTD, NORMAL, NORMAL, OUTPUT),
+
+ /* DAP */
+ DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, INPUT),
+
+ /* I2S1 */
+ DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT),
+
+ /* SPDIF */
+ DEFAULT_PINMUX(SPDIF_IN, SPDIF, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPDIF_OUT, SPDIF, NORMAL, NORMAL, OUTPUT),
+
+ /* I2S2 */
+ DEFAULT_PINMUX(DAP3_FS, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_DIN, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_DOUT, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_SCLK, I2S2, NORMAL, NORMAL, INPUT),
+
+ /* DAP4 */
+ DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT),
+
+ /* Tamonten GPIO */
+ DEFAULT_PINMUX(GPIO_PV2, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PV3, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI2_CS1_N, RSVD1, NORMAL, NORMAL, INPUT),
+
+ /* LCD */
+ DEFAULT_PINMUX(LCD_PWR1, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_PWR2, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_SDIN, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_SDOUT, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_WR_N, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_CS0_N, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_DC0, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_SCK, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_PWR0, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_PCLK, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_DE, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_HSYNC, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_VSYNC, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D0, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D1, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D2, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D3, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D4, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D5, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D6, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D7, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D8, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D9, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D10, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D11, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D12, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D13, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D14, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D15, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D16, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D17, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D18, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D19, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D20, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D21, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D22, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D23, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_CS1_N, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_M1, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_DC1, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CRT_HSYNC, CRT, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(CRT_VSYNC, CRT, NORMAL, NORMAL, OUTPUT),
+
+ /* BT656 */
+ LV_PINMUX(VI_MCLK, VI, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_PCLK, VI, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_HSYNC, VI, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_VSYNC, VI, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D2, VI, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D3, VI, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D4, VI, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D5, VI, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D6, VI, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D7, VI, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D8, VI, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D9, VI, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D11, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* GPIOs */
+ DEFAULT_PINMUX(GPIO_PU5, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU6, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD12, RSVD1, NORMAL, NORMAL, INPUT),
+
+ /* LCD BL */
+ DEFAULT_PINMUX(GMI_AD8, PWM0, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD10, RSVD4, NORMAL, NORMAL, OUTPUT),
+
+ /* SPI4 */
+ DEFAULT_PINMUX(GMI_A16, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A17, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A18, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A19, SPI4, NORMAL, NORMAL, INPUT),
+
+ /* Video input GPIO */
+ DEFAULT_PINMUX(GPIO_PCC1, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB0, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB7, RSVD1, NORMAL, NORMAL, INPUT),
+
+ /* Sensor GPIO */
+ DEFAULT_PINMUX(GPIO_PCC2, RSVD1, NORMAL, NORMAL, INPUT),
+
+ /* JTAG */
+ DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT),
+
+ /* Power controls */
+ DEFAULT_PINMUX(GMI_CS2_N, RSVD1, NORMAL, NORMAL, INPUT),
+
+ /* SPI1 */
+ DEFAULT_PINMUX(SPI1_MOSI, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_SCK, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_CS0_N, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_MISO, SPI1, NORMAL, NORMAL, INPUT),
+
+ /* PMU */
+ DEFAULT_PINMUX(GPIO_PV0, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SYS_CLK_REQ, SYSCLK, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(CLK_32K_IN, SYSCLK, NORMAL, NORMAL, INPUT),
+
+ /* PCI */
+ DEFAULT_PINMUX(PEX_L0_PRSNT_N, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L0_RST_N, PCIE, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PEX_L0_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_WAKE_N, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L1_PRSNT_N, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L1_RST_N, PCIE, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PEX_L1_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L2_PRSNT_N, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L2_RST_N, PCIE, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PEX_L2_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT),
+
+ /* HDMI */
+ DEFAULT_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(HDMI_INT, RSVD1, NORMAL, TRISTATE, INPUT),
+};
+
+static struct pingroup_config unused_pins_lowpower[] = {
+ /* UART1 - NC */
+ DEFAULT_PINMUX(ULPI_DATA2, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA3, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA4, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA5, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA6, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA7, UARTA, NORMAL, NORMAL, INPUT),
+
+ /* UART2 - NC */
+ DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, NORMAL, INPUT),
+
+ /* DAP - NC */
+ DEFAULT_PINMUX(CLK1_REQ, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK3_OUT, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK3_REQ, RSVD1, NORMAL, NORMAL, INPUT),
+
+ /* DAP4 - NC */
+ DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT),
+
+ /* Tamonten GPIO - NC */
+ DEFAULT_PINMUX(CLK2_OUT, EXTPERIPH2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK2_REQ, DAP, NORMAL, NORMAL, INPUT),
+
+ /* BT656 - NC */
+ LV_PINMUX(VI_D0, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D1, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D10, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* GPIO - NC */
+ DEFAULT_PINMUX(GPIO_PU0, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU1, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU2, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU3, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU4, RSVD1, NORMAL, NORMAL, INPUT),
+
+ /* Video input - NC */
+ DEFAULT_PINMUX(CAM_MCLK, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB3, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB5, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB6, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW11, RSVD1, NORMAL, NORMAL, INPUT),
+
+ /* KBC keys - NC */
+ DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW2, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW3, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW4, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW5, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW7, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW9, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW10, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW12, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW13, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW14, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW15, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL4, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL5, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, INPUT),
+
+ /* PMU - NC */
+ DEFAULT_PINMUX(CLK_32K_OUT, RSVD1, NORMAL, NORMAL, INPUT),
+
+ /* Power rails GPIO - NC */
+ DEFAULT_PINMUX(SPI2_SCK, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB4, RSVD1, NORMAL, NORMAL, INPUT),
+
+ /* Others - NC */
+ DEFAULT_PINMUX(GMI_WP_N, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PV1, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WAIT, NAND, UP, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_ADV_N, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CLK, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS3_N, NAND, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS7_N, NAND, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD0, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD1, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD2, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD3, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD4, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD5, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD6, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD7, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD11, NAND, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD13, NAND, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WR_N, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_OE_N, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_DQS, NAND, NORMAL, TRISTATE, OUTPUT),
+};
+
+static struct padctrl_config tamonten_ng_padctrl[] = {
+ /* (_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */
+ DEFAULT_PADCFG(SDIO1, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR,
+ SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, DISABLE, DISABLE),
+};
+#endif /* _PINMUX_CONFIG_TAMONTEN_NG_H_ */
diff --git a/board/avionic-design/common/tamonten-ng.c b/board/avionic-design/common/tamonten-ng.c
new file mode 100644
index 0000000..9d395c6
--- /dev/null
+++ b/board/avionic-design/common/tamonten-ng.c
@@ -0,0 +1,85 @@
+/*
+ * (C) Copyright 2013
+ * Avionic Design GmbH <www.avionic-design.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
+#include "pinmux-config-tamonten-ng.h"
+#include <i2c.h>
+
+#define PMU_I2C_ADDRESS 0x2D
+
+#define PMU_REG_LDO5 0x32
+
+#define PMU_REG_LDO_HIGH_POWER 1
+
+/* Voltage selection for the LDOs with 100mV resolution */
+#define PMU_REG_LDO_SEL_100(mV) ((((mV - 1000) / 100) + 2) << 2)
+
+#define PMU_REG_LDO_100(st, mV) (PMU_REG_LDO_##st | PMU_REG_LDO_SEL_100(mV))
+
+#define PMU_LDO5(st, mV) PMU_REG_LDO_100(st, mV)
+
+void pinmux_init(void)
+{
+ pinmux_config_table(tamonten_ng_pinmux_common,
+ ARRAY_SIZE(tamonten_ng_pinmux_common));
+ pinmux_config_table(unused_pins_lowpower,
+ ARRAY_SIZE(unused_pins_lowpower));
+
+ /* Initialize any non-default pad configs (APB_MISC_GP regs) */
+ padgrp_config_table(tamonten_ng_padctrl,
+ ARRAY_SIZE(tamonten_ng_padctrl));
+}
+
+void gpio_early_init(void)
+{
+ /* Turn on the alive signal */
+ gpio_request(GPIO_PV2, "ALIVE");
+ gpio_direction_output(GPIO_PV2, 1);
+
+ /* Remove the reset on the external periph */
+ gpio_request(GPIO_PI4, "nRST_PERIPH");
+ gpio_direction_output(GPIO_PI4, 1);
+}
+
+void pmu_write(uchar reg, uchar data)
+{
+ i2c_set_bus_num(4); /* PMU is on bus 4 */
+ i2c_write(PMU_I2C_ADDRESS, reg, 1, &data, 1);
+}
+
+/*
+ * Do I2C/PMU writes to bring up SD card bus power
+ *
+ */
+void board_sdmmc_voltage_init(void)
+{
+ /* Enable LDO5 with 3.3v for SDMMC3 */
+ pmu_write(PMU_REG_LDO5, PMU_LDO5(HIGH_POWER, 3300));
+
+ /* Switch the power on */
+ gpio_request(GPIO_PJ2, "EN_3V3_EMMC");
+ gpio_direction_output(GPIO_PJ2, 1);
+}
+
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the MMC muxes, power rails, etc.
+ */
+void pin_mux_mmc(void)
+{
+ /*
+ * NOTE: We don't do mmc-specific pin muxes here.
+ * They were done globally in pinmux_init().
+ */
+
+ /* Bring up the SDIO1 power rail */
+ board_sdmmc_voltage_init();
+}
diff --git a/board/avionic-design/dts/tegra30-tamonten.dtsi b/board/avionic-design/dts/tegra30-tamonten.dtsi
new file mode 100644
index 0000000..50d5762
--- /dev/null
+++ b/board/avionic-design/dts/tegra30-tamonten.dtsi
@@ -0,0 +1,69 @@
+#include "tegra30.dtsi"
+
+/ {
+ model = "Avionic Design Tamonten NG";
+ compatible = "ad,tamonten-ng", "nvidia,tegra30";
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ aliases {
+ i2c0 = "/i2c at 7000c000";
+ i2c1 = "/i2c at 7000c700";
+ i2c2 = "/i2c at 7000c400";
+ i2c3 = "/i2c at 7000c500";
+ i2c4 = "/i2c at 7000d000";
+ sdhci0 = "/sdhci at 78000600";
+ sdhci1 = "/sdhci at 78000400";
+ sdhci2 = "/sdhci at 78000000";
+ usb0 = "/usb at 7d008000";
+ };
+
+ /* GEN1 */
+ i2c at 7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ /* GEN2 */
+ i2c at 7000c400 {
+ clock-frequency = <100000>;
+ };
+
+ /* CAM */
+ i2c at 7000c500 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ /* DDC */
+ i2c at 7000c700 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ /* PWR */
+ i2c at 7000d000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ /* SD slot on the base board */
+ sdhci at 78000400 {
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+ wp-gpios = <&gpio 67 0>; /* gpio PI3 */
+ bus-width = <4>;
+ };
+
+ /* EMMC on the COM module */
+ sdhci at 78000600 {
+ status = "okay";
+ bus-width = <8>;
+ };
+
+ usb at 7d008000 {
+ status = "okay";
+ };
+
+};
diff --git a/board/avionic-design/dts/tegra30-tec-ng.dts b/board/avionic-design/dts/tegra30-tec-ng.dts
new file mode 100644
index 0000000..8a69e81
--- /dev/null
+++ b/board/avionic-design/dts/tegra30-tec-ng.dts
@@ -0,0 +1,18 @@
+/dts-v1/;
+
+#include "tegra30-tamonten.dtsi"
+
+/ {
+ model = "Avionic Design Tamonten™ NG Evaluation Carrier";
+ compatible = "ad,tec-ng", "nvidia,tegra30";
+
+ /* GEN2 */
+ i2c at 7000c400 {
+ status = "okay";
+ };
+
+ /* SD card slot */
+ sdhci at 78000400 {
+ status = "okay";
+ };
+};
diff --git a/board/avionic-design/tec-ng/Makefile b/board/avionic-design/tec-ng/Makefile
new file mode 100644
index 0000000..22e19e0
--- /dev/null
+++ b/board/avionic-design/tec-ng/Makefile
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2013
+# Avionic Design GmbH <www.avionic-design.de>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+$(shell mkdir -p $(obj)../common $(obj)../../nvidia/common)
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS-y := ../common/tamonten-ng.o
+
+include ../../nvidia/common/common.mk
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/boards.cfg b/boards.cfg
index caba64e..fc5cb2d 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -353,6 +353,7 @@ Active arm armv7:arm720t tegra114 nvidia dalmore
Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Thierry Reding <thierry.reding at avionic-design.de>
Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Thierry Reding <thierry.reding at avionic-design.de>
Active arm armv7:arm720t tegra20 avionic-design tec tec - Thierry Reding <thierry.reding at avionic-design.de>
+Active arm armv7:arm720t tegra30 avionic-design tec-ng tec-ng - Alban Bedel <alban.bedel at avionic-design.de>
Active arm armv7:arm720t tegra20 compal paz00 paz00 - Tom Warren <twarren at nvidia.com>:Stephen Warren <swarren at nvidia.com>
Active arm armv7:arm720t tegra20 compulab trimslice trimslice - Tom Warren <twarren at nvidia.com>:Stephen Warren <swarren at nvidia.com>
Active arm armv7:arm720t tegra20 nvidia harmony harmony - Tom Warren <twarren at nvidia.com>
diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h
new file mode 100644
index 0000000..13baa76
--- /dev/null
+++ b/include/configs/tec-ng.h
@@ -0,0 +1,84 @@
+/*
+ * (C) Copyright 2013
+ * Avionic Design GmbH <www.avionic-design.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tegra30-common.h"
+
+/* Enable fdt support for tec-ng. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE tegra30-tec-ng
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT "Tegra30 (TEC-NG) # "
+#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten™ NG Evaluation Carrier"
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA_ENABLE_UARTD
+#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* I2C */
+#define CONFIG_SYS_I2C_TEGRA
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 2
+
+/* SPI */
+#define CONFIG_TEGRA20_SLINK
+#define CONFIG_TEGRA_SLINK_CTRLS 6
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 24000000
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_SIZE (4 << 20)
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+/* Tag support */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+/* support the new (FDT-based) image format */
+#define CONFIG_FIT
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
--
1.8.4.2
More information about the U-Boot
mailing list