[U-Boot] [PATCH 5/7] mmc: Enhance mmcinfo command

Haijun Zhang Haijun.Zhang at freescale.com
Tue Nov 5 07:23:51 CET 2013


Once mmc initialization was faild has_init should be set to 0,
prepard for the next initialization to recover from error.

Once mmcinfo command failed error should point out instead of print
incorrect mmc device information.

Error log:
=> mmcinfo
Device: FSL_SDHC
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0 Bytes
Bus Width: 1-bit
=> mmcinfo
Device: FSL_SDHC
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0 Bytes
Bus Width: 1-bit

Signed-off-by: Haijun Zhang <haijun.zhang at freescale.com>
---
 common/cmd_mmc.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 15cecb7..6f0e5ff 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -115,8 +115,10 @@ static int do_mmcinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	mmc = find_mmc_device(curr_device);
 
 	if (mmc) {
-		mmc_init(mmc);
-
+		if (mmc_init(mmc)) {
+			puts("Got MMC device infor error\n");
+			return 1;
+		}
 		print_mmcinfo(mmc);
 		return 0;
 	} else {
@@ -191,9 +193,10 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 		mmc->has_init = 0;
 
-		if (mmc_init(mmc))
+		if (mmc_init(mmc)) {
+			mmc->has_init = 0;
 			return 1;
-		else
+		} else
 			return 0;
 	} else if (strncmp(argv[1], "part", 4) == 0) {
 		block_dev_desc_t *mmc_dev;
-- 
1.8.4




More information about the U-Boot mailing list