[U-Boot] [PATCH] spi: Add support SH Quad SPI driver

Nobuhiro Iwamatsu nobuhiro.iwamatsu.yj at renesas.com
Thu Nov 21 09:11:38 CET 2013


Hi, Jagannadha.

Do you have any comment about this patch?
If no problem, could you pickup your repository?

Best regards,
  Nobuhiro

2013/10/9 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj at renesas.com>:
> This patch adds a driver for Renesas SoC's Quad SPI bus.
> This supports with 8 bits per transfer to use with SPI flash.
>
> Signed-off-by: Kouei Abe <kouei.abe.cp at renesas.com>
> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj at renesas.com>
> Signed-off-by: Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
> ---
> Changes for v5:
>   - Add print abort when call ctrlc().
>   - Move source code in spi_xfer() which should be processed by
>     spi_cs_activate().
>   - Move source code in spi_xfer() which should be processed by
>     spi_cs_deactivate().
>   - Remove sh_qspi_xfer, move to spi_xfer().
> Changes for v4:
>   - Added tabs
>   - Added comments
>   - Added sh_qspi_init()
> Changes for v3:
>   - Change Queued to Quad.
>   - Remove path of file from file header.
>   - Use read* and write* directly instead of sh_qspi_write* sh_qspi_read*.
>   - Change driver format.
> Changes for v2:
>   - "SH QSPI" to "SH QSPI (Queued SPI)".
>   - Remove magic number.
>
>  drivers/spi/Makefile  |   1 +
>  drivers/spi/sh_qspi.c | 244 ++++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 245 insertions(+)
>  create mode 100644 drivers/spi/sh_qspi.c
>
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index 91d24ce..c44f851 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -33,6 +33,7 @@ COBJS-$(CONFIG_OC_TINY_SPI) += oc_tiny_spi.o
>  COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o
>  COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
>  COBJS-$(CONFIG_SH_SPI) += sh_spi.o
> +COBJS-$(CONFIG_SH_QSPI) += sh_qspi.o
>  COBJS-$(CONFIG_FSL_ESPI) += fsl_espi.o
>  COBJS-$(CONFIG_FDT_SPI) += fdt_spi.o
>  COBJS-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o
> diff --git a/drivers/spi/sh_qspi.c b/drivers/spi/sh_qspi.c
> new file mode 100644
> index 0000000..8f53552
> --- /dev/null
> +++ b/drivers/spi/sh_qspi.c
> @@ -0,0 +1,244 @@
> +/*
> + * SH QSPI (Quad SPI) driver
> + *
> + * Copyright (C) 2013 Renesas Electronics Corporation
> + * Copyright (C) 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj at renesas.com>
> + *
> + * SPDX-License-Identifier:    GPL-2.0
> + */
> +
> +#include <common.h>
> +#include <malloc.h>
> +#include <spi.h>
> +#include <asm/io.h>
> +
> +/* SH QSPI register bit masks <REG>_<BIT> */
> +#define SPCR_MSTR      0x08
> +#define SPCR_SPE       0x40
> +#define SPSR_SPRFF     0x80
> +#define SPSR_SPTEF     0x20
> +#define SPPCR_IO3FV    0x04
> +#define SPPCR_IO2FV    0x02
> +#define SPPCR_IO1FV    0x01
> +#define SPBDCR_RXBC0   (1 << 0)
> +#define SPCMD_SCKDEN   (1 << 15)
> +#define SPCMD_SLNDEN   (1 << 14)
> +#define SPCMD_SPNDEN   (1 << 13)
> +#define SPCMD_SSLKP    (1 << 7)
> +#define SPCMD_BRDV0    (1 << 2)
> +#define SPCMD_INIT1    SPCMD_SCKDEN | SPCMD_SLNDEN | \
> +                       SPCMD_SPNDEN | SPCMD_SSLKP | \
> +                       SPCMD_BRDV0
> +#define SPCMD_INIT2    SPCMD_SPNDEN | SPCMD_SSLKP | \
> +                       SPCMD_BRDV0
> +#define SPBFCR_TXRST   (1 << 7)
> +#define SPBFCR_RXRST   (1 << 6)
> +
> +/* SH QSPI register set */
> +struct sh_qspi_regs {
> +       unsigned char spcr;
> +       unsigned char sslp;
> +       unsigned char sppcr;
> +       unsigned char spsr;
> +       unsigned long spdr;
> +       unsigned char spscr;
> +       unsigned char spssr;
> +       unsigned char spbr;
> +       unsigned char spdcr;
> +       unsigned char spckd;
> +       unsigned char sslnd;
> +       unsigned char spnd;
> +       unsigned char dummy0;
> +       unsigned short spcmd0;
> +       unsigned short spcmd1;
> +       unsigned short spcmd2;
> +       unsigned short spcmd3;
> +       unsigned char spbfcr;
> +       unsigned char dummy1;
> +       unsigned short spbdcr;
> +       unsigned long spbmul0;
> +       unsigned long spbmul1;
> +       unsigned long spbmul2;
> +       unsigned long spbmul3;
> +};
> +
> +struct sh_qspi_slave {
> +       struct spi_slave        slave;
> +       struct sh_qspi_regs     *regs;
> +};
> +
> +static inline struct sh_qspi_slave *to_sh_qspi(struct spi_slave *slave)
> +{
> +       return container_of(slave, struct sh_qspi_slave, slave);
> +}
> +
> +static void sh_qspi_init(struct sh_qspi_slave *ss)
> +{
> +       /* QSPI initialize */
> +       writeb(SPCR_MSTR, &ss->regs->spcr);
> +       writeb(0x00, &ss->regs->sslp);
> +       writeb(SPPCR_IO3FV|SPPCR_IO2FV, &ss->regs->sppcr);
> +
> +       /* Set bit rate. See 58.3.8 Quad Serial Peripheral Interface */
> +       writeb(0x01, &ss->regs->spbr);
> +
> +       writeb(0x00, &ss->regs->spdcr);
> +       writeb(0x00, &ss->regs->spckd);
> +       writeb(0x00, &ss->regs->sslnd);
> +       writeb(0x00, &ss->regs->spnd);
> +       writew(SPCMD_INIT1, &ss->regs->spcmd0);
> +       writew(SPCMD_INIT2, &ss->regs->spcmd0);
> +       writeb(SPBFCR_TXRST|SPBFCR_RXRST, &ss->regs->spbfcr);
> +       writeb(0x00, &ss->regs->spbfcr);
> +       writeb(0x00, &ss->regs->spscr);
> +       writeb(SPCR_SPE|SPCR_MSTR, &ss->regs->spcr);
> +}
> +
> +int spi_cs_is_valid(unsigned int bus, unsigned int cs)
> +{
> +       return 1;
> +}
> +
> +void spi_cs_activate(struct spi_slave *slave)
> +{
> +       struct sh_qspi_slave *ss = to_sh_qspi(slave);
> +
> +       writeb(SPCR_MSTR, &ss->regs->spcr);
> +       writew(SPCMD_INIT1, &ss->regs->spcmd0);
> +       writeb(SPBFCR_TXRST|SPBFCR_RXRST, &ss->regs->spbfcr);
> +       writeb(0x00, &ss->regs->spbfcr);
> +       writeb(0x00, &ss->regs->spscr);
> +       writeb(SPCR_SPE|SPCR_MSTR, &ss->regs->spcr);
> +}
> +
> +void spi_cs_deactivate(struct spi_slave *slave)
> +{
> +       struct sh_qspi_slave *ss = to_sh_qspi(slave);
> +
> +       writeb(SPCR_MSTR, &ss->regs->spcr);
> +}
> +
> +void spi_init(void)
> +{
> +       /* nothing to do */
> +}
> +
> +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
> +               unsigned int max_hz, unsigned int mode)
> +{
> +       struct sh_qspi_slave *ss;
> +
> +       if (!spi_cs_is_valid(bus, cs))
> +               return NULL;
> +
> +       ss = spi_alloc_slave(struct sh_qspi_slave, bus, cs);
> +       if (!ss) {
> +               printf("SPI_error: Fail to allocate sh_qspi_slave\n");
> +               return NULL;
> +       }
> +
> +       ss->regs = (struct sh_qspi_regs *)CONFIG_SH_QSPI_BASE;
> +
> +       /* Init SH QSPI */
> +       sh_qspi_init(ss);
> +
> +       return &ss->slave;
> +}
> +
> +void spi_free_slave(struct spi_slave *slave)
> +{
> +       struct sh_qspi_slave *spi = to_sh_qspi(slave);
> +
> +       free(spi);
> +}
> +
> +int spi_claim_bus(struct spi_slave *slave)
> +{
> +       return 0;
> +}
> +
> +void spi_release_bus(struct spi_slave *slave)
> +{
> +}
> +
> +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
> +            void *din, unsigned long flags)
> +{
> +       struct sh_qspi_slave *ss = to_sh_qspi(slave);
> +       unsigned long nbyte;
> +       int ret = 0;
> +       unsigned char dtdata = 0, drdata;
> +       unsigned char *tdata = &dtdata, *rdata = &drdata;
> +       unsigned long *spbmul0 = &ss->regs->spbmul0;
> +
> +       if (dout == NULL && din == NULL) {
> +               if (flags & SPI_XFER_END)
> +                       spi_cs_deactivate(slave);
> +               return 0;
> +       }
> +
> +       if (bitlen % 8) {
> +               printf("%s: bitlen is not 8bit alined %d", __func__, bitlen);
> +               return 1;
> +       }
> +
> +       nbyte = bitlen / 8;
> +
> +       if (flags & SPI_XFER_BEGIN) {
> +               spi_cs_activate(slave);
> +
> +               /* Set 1048576 byte */
> +               writel(0x100000, spbmul0);
> +       }
> +
> +       if (flags & SPI_XFER_END)
> +               writel(nbyte, spbmul0);
> +
> +       if (dout != NULL)
> +               tdata = (unsigned char *)dout;
> +
> +       if (din != NULL)
> +               rdata = din;
> +
> +       while (nbyte > 0) {
> +               while (!(readb(&ss->regs->spsr) & SPSR_SPTEF)) {
> +                       if (ctrlc()) {
> +                               puts("abort\n");
> +                               return 1;
> +                       }
> +                       udelay(10);
> +               }
> +
> +               writeb(*tdata, (unsigned char *)(&ss->regs->spdr));
> +
> +               while ((readw(&ss->regs->spbdcr) != SPBDCR_RXBC0)) {
> +                       if (ctrlc()) {
> +                               puts("abort\n");
> +                               return 1;
> +                       }
> +                       udelay(1);
> +               }
> +
> +               while (!(readb(&ss->regs->spsr) & SPSR_SPRFF)) {
> +                       if (ctrlc()) {
> +                               puts("abort\n");
> +                               return 1;
> +                       }
> +                       udelay(10);
> +               }
> +
> +               *rdata = readb((unsigned char *)(&ss->regs->spdr));
> +
> +               if (dout != NULL)
> +                       tdata++;
> +               if (din != NULL)
> +                       rdata++;
> +
> +               nbyte--;
> +       }
> +
> +       if (flags & SPI_XFER_END)
> +               spi_cs_deactivate(slave);
> +
> +       return ret;
> +}
> --
> 1.8.4.rc3
>



-- 
Nobuhiro Iwamatsu


More information about the U-Boot mailing list