[U-Boot] [PATCH 1/4] blackfin: i2c: Missing the patch to define GPIO I2C pins.

[Heiko Schocher]

Hello Sonic Zhang,

Am 18.11.2013 08:12, schrieb Sonic Zhang:
> From: Sonic Zhang<sonic.zhang at analog.com>
>
> Signed-off-by: Sonic Zhang<sonic.zhang at analog.com>
> ---
>   include/configs/bf533-stamp.h | 48 +++++--------------------------------------
>   1 file changed, 5 insertions(+), 43 deletions(-)
>
> diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
> index a22c868..26a140e 100644
> --- a/include/configs/bf533-stamp.h
> +++ b/include/configs/bf533-stamp.h
> @@ -14,6 +14,7 @@
>   #define CONFIG_BFIN_CPU             bf533-0.3
>   #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
>
> +

Not needed, please remove.

>   /*
>    * Clock Settings
>    *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
> @@ -37,6 +38,7 @@
>   /* Values can range from 1-15						*/
>   #define CONFIG_SCLK_DIV			6 /* note: 1.2 boards can go faster */
>
> +

Here too...

>   /*
>    * Memory Settings
>    */
> @@ -72,42 +74,6 @@
>   /* #define CONFIG_ETHADDR	02:80:ad:20:31:b8 */
>
>
> -/* I2C */
> -#define CONFIG_SYS_I2C
> -#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
> -#define CONFIG_SYS_I2C_SOFT_SPEED	50000
> -#define CONFIG_SYS_I2C_SOFT_SLAVE	0

Why do you remove the soft i2c driver?

> -/*
> - * Software (bit-bang) I2C driver configuration
> - */
> -#define PF_SCL			PF3
> -#define PF_SDA			PF2
> -#define I2C_INIT		(*pFIO_DIR |=  PF_SCL); asm("ssync;")
> -#define I2C_ACTIVE		(*pFIO_DIR |=  PF_SDA); \
> -				*pFIO_INEN&= ~PF_SDA; asm("ssync;")
> -#define I2C_TRISTATE		(*pFIO_DIR&= ~PF_SDA); \
> -				*pFIO_INEN |= PF_SDA; asm("ssync;")
> -#define I2C_READ		((volatile)(*pFIO_FLAG_D&  PF_SDA) != 0); \
> -				asm("ssync;")
> -#define I2C_SDA(bit)	if (bit) { \
> -				*pFIO_FLAG_S = PF_SDA; \
> -				asm("ssync;"); \
> -				} \
> -			else	{ \
> -				*pFIO_FLAG_C = PF_SDA; \
> -				asm("ssync;"); \
> -				}
> -#define I2C_SCL(bit)	if (bit) { \
> -				*pFIO_FLAG_S = PF_SCL; \
> -				asm("ssync;"); \
> -				} \
> -			else	{ \
> -				*pFIO_FLAG_C = PF_SCL; \
> -				asm("ssync;"); \
> -				}
> -#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
> -
> -
>   /*
>    * Flash Settings
>    */
> @@ -118,6 +84,7 @@
>   #define CONFIG_SYS_MAX_FLASH_BANKS	1
>   #define CONFIG_SYS_MAX_FLASH_SECT	67
>
> +
>   /*
>    * SPI Settings
>    */
> @@ -165,15 +132,10 @@
>   /*
>    * I2C Settings
>    */
> -#define CONFIG_SYS_I2C_SOFT
> -#ifdef CONFIG_SYS_I2C_SOFT
> -#define CONFIG_SYS_I2C
> +#define CONFIG_SOFT_I2C

NAK. This define is not existent in current mainline code ...

>   #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF3
>   #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF2
> -#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
> -#define CONFIG_SYS_I2C_SOFT_SPEED	50000
> -#define CONFIG_SYS_I2C_SOFT_SLAVE	0
> -#endif
> +
>
>   /*
>    * Compact Flash / IDE / ATA Settings

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany