[U-Boot] [PATCH 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3

Vaibhav Bedia vaibhav.bedia at gmail.com
Wed Nov 13 15:08:29 CET 2013


On Wed, Nov 13, 2013 at 3:48 AM, Lokesh Vutla <lokeshvutla at ti.com> wrote:
[...]
> I checked with hardware folks. There is no register or some way to tell
> if VTT is present. It is not added in EEPROM also and I have no answer why it
> is not added in EEPROM..:(
> It is specific to boards using DDR3. So its good to have it in board files as I did it here
> instead of adding this check in emif file.

That EEPROM is clearly not getting used the way i think it should be :\
I would have made a lot of noise to get details like this added there.

You should at least check for the GP EVM (if possible) and then enable
VTT. Doing this unconditionally is bound to cause problems later on.
I would also put in a big comment over there so that folks who design
their own board with DDR3 don't miss this fact.

Regards,
Vaibhav


More information about the U-Boot mailing list