[U-Boot] [PATCH 1/5] ahci: Error out with message on malloc() failure

[Roger Quadros]

If malloc() fails, we don't want to continue in ahci_init() and
ahci_init_one(). Also print a more informative error message on
malloc() failures.

CC: Rob Herring <rob.herring at calxeda.com>
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
 drivers/block/ahci.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index 0daad36..e24d634 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -379,6 +379,11 @@ static int ahci_init_one(pci_dev_t pdev)
 	int rc;
 
 	probe_ent = malloc(sizeof(struct ahci_probe_ent));
+	if (!probe_ent) {
+		printf("%s: No memory for probe_ent\n", __func__);
+		return -ENOMEM;
+	}
+
 	memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
 	probe_ent->dev = pdev;
 
@@ -503,7 +508,7 @@ static int ahci_port_start(u8 port)
 	mem = (u32) malloc(AHCI_PORT_PRIV_DMA_SZ + 2048);
 	if (!mem) {
 		free(pp);
-		printf("No mem for table!\n");
+		printf("%s: No mem for table!\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -638,8 +643,10 @@ static int ata_scsiop_inquiry(ccb *pccb)
 	/* Read id from sata */
 	port = pccb->target;
 	tmpid = malloc(ATA_ID_WORDS * 2);
-	if (!tmpid)
+	if (!tmpid) {
+		printf("%s: No memory for tmpid\n", __func__);
 		return -ENOMEM;
+	}
 
 	if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), (u8 *)tmpid,
 				ATA_ID_WORDS * 2, 0)) {
@@ -889,6 +896,11 @@ int ahci_init(u32 base)
 	u32 linkmap;
 
 	probe_ent = malloc(sizeof(struct ahci_probe_ent));
+	if (!probe_ent) {
+		printf("%s: No memory for probe_ent\n", __func__);
+		return -ENOMEM;
+	}
+
 	memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
 
 	probe_ent->host_flags = ATA_FLAG_SATA
-- 
1.8.3.2