[U-Boot] Many Blackfin boards are broken

Sonic Zhang sonic.adi at gmail.com
Mon Nov 18 08:20:03 CET 2013


Hi Masahiro,

Thank you for report these failure.
They are all fixed. See my 4 patches in the other emails.

Regards,

Sonic Zhang

On Mon, Nov 18, 2013 at 12:22 PM, Masahiro Yamada
<yamada.m at jp.panasonic.com> wrote:
> Hello Sonic and other Blackfin board maintainers.
>
> I cannot build many of Blackfin boards.
>
>
> (1)
> gpio.c:780: error: ‘PORTA_FER’ undeclared here (not in a function)
> gpio.c:781: error: ‘PORTB_FER’ undeclared here (not in a function)
> gpio.c:782: error: ‘PORTC_FER’ undeclared here (not in a function)
> gpio.c:783: error: ‘PORTD_FER’ undeclared here (not in a function)
> gpio.c:784: error: ‘PORTE_FER’ undeclared here (not in a function)
>
> I confirmed this error message for:
> bf506f-ezkit, bf525-ucr2, bf537-minotaur, bf537-srv1, blackstamp,
> dnp5370.
>
>
>
> (2)
> Compiling cm-bf548 board failed with the following message:
> gpio.c:61:3: error: #error no gpio arrays defined
>
>
> (3)
> Compiling bf533-stamp failed with the following message:
> soft_i2c.c:155: error: ‘pFIO_FLAG_S’ undeclared (first use in this function)
> soft_i2c.c:155: error: (Each undeclared identifier is reported only once
> soft_i2c.c:155: error: for each function it appears in.)
> soft_i2c.c:155: error: ‘pFIO_FLAG_C’ undeclared (first use in this function)
> soft_i2c.c:158: error: ‘pFIO_DIR’ undeclared (first use in this function)
> soft_i2c.c:160: error: ‘pFIO_INEN’ undeclared (first use in this function)
> soft_i2c.c:182: error: ‘pFIO_FLAG_S’ undeclared (first use in this function)
> soft_i2c.c:182: error: ‘pFIO_FLAG_C’ undeclared (first use in this function)
> soft_i2c.c:183: error: ‘pFIO_DIR’ undeclared (first use in this function)
> soft_i2c.c:183: error: ‘pFIO_INEN’ undeclared (first use in this function)
> soft_i2c.c:198: error: ‘pFIO_FLAG_S’ undeclared (first use in this function)
> soft_i2c.c:198: error: ‘pFIO_FLAG_C’ undeclared (first use in this function)
> soft_i2c.c:201: error: ‘pFIO_DIR’ undeclared (first use in this function)
> soft_i2c.c:201: error: ‘pFIO_INEN’ undeclared (first use in this function)
> soft_i2c.c:217: error: ‘pFIO_FLAG_S’ undeclared (first use in this function)
> soft_i2c.c:217: error: ‘pFIO_FLAG_C’ undeclared (first use in this function)
> soft_i2c.c:219: error: ‘pFIO_DIR’ undeclared (first use in this function)
> soft_i2c.c:219: error: ‘pFIO_INEN’ undeclared (first use in this function)
> soft_i2c.c:238: error: ‘pFIO_DIR’ undeclared (first use in this function)
> soft_i2c.c:238: error: ‘pFIO_INEN’ undeclared (first use in this function)
> soft_i2c.c:240: error: ‘pFIO_FLAG_S’ undeclared (first use in this function)
> soft_i2c.c:240: error: ‘pFIO_FLAG_C’ undeclared (first use in this function)
> soft_i2c.c:262: error: ‘pFIO_FLAG_D’ undeclared (first use in this function)
> soft_i2c.c:283: error: ‘pFIO_DIR’ undeclared (first use in this function)
> soft_i2c.c:283: error: ‘pFIO_INEN’ undeclared (first use in this function)
> soft_i2c.c:284: error: ‘pFIO_FLAG_S’ undeclared (first use in this function)
> soft_i2c.c:284: error: ‘pFIO_FLAG_C’ undeclared (first use in this function)
> soft_i2c.c:292: error: ‘pFIO_FLAG_D’ undeclared (first use in this function)
>
>
>
> Best Regards
> Masahiro Yamada
>


More information about the U-Boot mailing list