[U-Boot] [PATCH 1/1] MX6 SabreSD: Use readl() to read the CCM_CCGR3 register

[Liu Ying]

Align with the context to use readl() to read the CCM_CCGR3
register with memory barrier instead of __raw_readl().

Signed-off-by: Liu Ying <Ying.Liu at freescale.com>
---
 board/freescale/mx6sabresd/mx6sabresd.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 9dbe605..d4b3b99 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -360,7 +360,7 @@ static void setup_display(void)
 	imx_setup_hdmi();
 
 	/* Turn on LDB0, LDB1, IPU,IPU DI0 clocks */
-	reg = __raw_readl(&mxc_ccm->CCGR3);
+	reg = readl(&mxc_ccm->CCGR3);
 	reg |=  MXC_CCM_CCGR3_LDB_DI0_MASK | MXC_CCM_CCGR3_LDB_DI1_MASK;
 	writel(reg, &mxc_ccm->CCGR3);
 
-- 
1.7.1