[U-Boot] [PATCH 01/10 V6] EXYNOS5: Create a common board file

Rajeshwari Birje rajeshwari.birje at gmail.com
Fri Nov 8 10:52:11 CET 2013


Hi,

On Fri, Nov 8, 2013 at 3:16 PM, Przemyslaw Marczak
<p.marczak at samsung.com> wrote:
> Hi,
>
>
> On 11/08/2013 10:27 AM, Rajeshwari Birje wrote:
>>
>> Hi,
>>
>>
>> On Fri, Nov 8, 2013 at 2:33 PM, Przemyslaw Marczak
>> <p.marczak at samsung.com> wrote:
>>>
>>> Hi,
>>>
>>>
>>> On 11/08/2013 09:37 AM, Rajeshwari Birje wrote:
>>>>
>>>>
>>>> Hi Przemyslaw
>>>>
>>>> On Fri, Nov 8, 2013 at 1:43 PM, Przemyslaw Marczak
>>>> <p.marczak at samsung.com> wrote:
>>>>>
>>>>>
>>>>> Hello Rajeshwari,
>>>>>
>>>>>
>>>>> On 10/29/2013 08:23 AM, Rajeshwari S Shinde wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>> Create a common board.c file for all functions which are common across
>>>>>> all EXYNOS5 platforms.
>>>>>>
>>>>>> exynos_init function is provided for platform specific code.
>>>>>>
>>>>>> Signed-off-by: Rajeshwari S Shinde <rajeshwari.s at samsung.com>
>>>>>> Acked-by: Simon Glass <sjg at chromium.org>
>>>>>> ---
>>>>>> Changes in V2:
>>>>>>           - None
>>>>>> Changes in V3:
>>>>>>           - None
>>>>>> Changes in V4:
>>>>>>           - Added check for the compilation of MAX77686 pmic.
>>>>>> Changes in V5:--
>>
>> Regards,
>> Rajeshwari Shind
>>>>>>
>>>>>>           - Moved board_eth_init and board_mmc_init in case of
>>>>>>           device tree support
>>>>>> Changes in V6:
>>>>>>           - None.
>>>>>>     arch/arm/include/asm/arch-exynos/board.h |  17 ++
>>>>>>     board/samsung/common/Makefile            |   4 +
>>>>>>     board/samsung/common/board.c             | 405
>>>>>> +++++++++++++++++++++++++++++++
>>>>>>     board/samsung/smdk5250/exynos5-dt.c      | 361
>>>>>> +--------------------------
>>>>>>     board/samsung/smdk5250/smdk5250.c        | 182 +-------------
>>>>>>     include/configs/exynos5250-dt.h          |   2 +
>>>>>>     6 files changed, 435 insertions(+), 536 deletions(-)
>>>>>>     create mode 100644 arch/arm/include/asm/arch-exynos/board.h
>>>>>>     create mode 100644 board/samsung/common/board.c
>>>>>>
>>>>>
>>>>> The name of exynos5 common file can't be just "board.c" since it is
>>>>> common
>>>>> only for Exynos5 boards and is placed in Samsung common.
>>>>> We have few Exynos4 boards in u-boot and in future we can introduce
>>>>> common
>>>>> board file for them too.
>>>>> So it is better to add some additional word to this file name. This
>>>>> also
>>>>> needs to change config name or add checking SOC version in common
>>>>> Makefile.
>>>>>
>>>> Cannot we use the same file even for exynos4 boards.
>>>>
>>>
>>> I'm not sure that you understand my intention.
>>>
>>> You want to introduce:
>>> board/samsung/common/board.c - with only Exynos5 code
>>>
>>> I mean that it should looks like this, e.g:
>>> "board/samsung/common/board_exynos4.c" - common code for all Exynos 4
>>> "board/samsung/common/board_exynos5.c" - common code for all Exynos 5
>>> since there is some duplicated code in Exynos4 boards that can be moved
>>> to
>>> one common file in the future.
>>> Do you understand my intention now?
>>>
>> Yes I understood your intention,  but had a question cannot we use the
>> same file board.c for exynos4 and exynos5 too.
>> Since both have most of functions similar like board_init,  dram_init,
>> board_uart_init and so on.
>>
>> If u still feel that exynos4 and exynos5 have lots of functions
>> different in board/samsung we can create a seperate file. I was hoping
>> the same board.c could be reused for exynos4 also.
>>
> Ah, ok. This is good idea with the one common file. Then we will have board
> files with strict board dependent functions. So I don't have any objections
> jet.
> Regards,

Ok Thank you.
-- 
Regards,
Rajeshwari Shinde
>
>
> --
> Przemyslaw Marczak
> Samsung R&D Institute Poland
> Samsung Electronics
> p.marczak at samsung.com


More information about the U-Boot mailing list