[U-Boot] [[PATCH v2]pandaboard: 0/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3

Hardik hardik.patel at volansystech.com
Thu Nov 14 11:06:51 CET 2013


From: Hardik Patel <hardik.patel at volansystech.com>

This patch adds Elpida DDR2 RAM support for Pandaboard-ES Rev-B3 board. We need to use emif_regs_elpida_400_mhz_1cs struct to dump timings required for Elpida RAM on Pandaboard-ES Rev-B3. So, we detected Pandaboard-ES Rev-B3, and put a check to differentiate Rev-B3 with other panda boards. We verified that u-boot works on Panadaboard-ES Rev-B2 board with this patch.

---
Changes for v2:
   - Use pre-calculated timings for Elpida RAM instead of automatic
   - Added function to detect Pandaboard-ES Rev-B3 using GPIO 171

Hardik Patel (1):
  Modification of Elpida DDR2 RAM

 arch/arm/cpu/armv7/omap4/sdram_elpida.c |    2 +-
 board/ti/panda/panda.c                  |   24 ++++++++++++++++++++++++
 2 files changed, 25 insertions(+), 1 deletion(-)

-- 
1.7.9.5



More information about the U-Boot mailing list