[U-Boot] [PATCH v3 08/18] malta: setup super I/O UARTs

[Marek Vasut]

Dear Paul Burton,

> On a real Malta the Super I/O needs to be configured before we are able
> to access the UARTs. This patch performs that configuration, setting up
> the UARTs in the same way that YAMON would.

[...]

> --- /dev/null
> +++ b/board/imgtec/malta/superio.c

Do we not already have some kind of a superIO controller driver in U-Boot ? Just 
wondering, I seem to remember seeing a few. Is this driver re-usable by other 
boards too maybe?

Best regards,
Marek Vasut