[U-Boot] [PATCH 2/2] ARM: versatile: pass console setting to the kernel

[Linus Walleij]

The Versatiles come up with the primary UART set to ttyAMA0 at
38400 baud, and unless we pass this to the kernel it will assume
it is set to 9600 baud which will be quite awkward for the
terminal, let's try to be helpful and inform the kernel what
setting is used.

Cc: Stefano Babic <sbabic at denx.de>
Cc: Marek Vasut <marex at denx.de>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 include/configs/versatile.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/configs/versatile.h b/include/configs/versatile.h
index 10738ac24be0..29c32fee5178 100644
--- a/include/configs/versatile.h
+++ b/include/configs/versatile.h
@@ -101,7 +101,8 @@
 
 #define CONFIG_BOOTDELAY	2
 #define CONFIG_BOOTARGS		"root=/dev/nfs mem=128M ip=dhcp "\
-				"netdev=25,0,0xf1010000,0xf1010010,eth0"
+				"netdev=25,0,0xf1010000,0xf1010010,eth0 "\
+				"console=ttyAMA0,38400n1"
 
 /*
  * Static configuration when assigning fixed address
-- 
1.8.3.1